Tender For Repair Of Flooring, Plumbing And Joinery Works In Otm & Md Accn At 14 Gtc Subathu Under Ge Kasauli.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Flooring, Plumbing And Joinery Works In Otm & Md Accn At 14 Gtc Subathu Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 3 | All as per Item No. 1.00 but n.exc 1.5m2 each -ditto-. |
| 4 | Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters of any description n.exc. 1 Sqm each complete all as specified and directed. |
| 6 | Supply and fix pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed complete all as specified and directed. |
| 7 | Supply and fix pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed complete all as specified and directed. |
| 8 | Supply and fix IInd class hard wood (sal) plain.solid straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and directed. |
| 9 | Supply and fix M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc complete all as specified and directed. |
| 10 | Cutting holes in brick walls exc half brick wall but n exc one brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantled portion in CM ( 1:3 ) or cement concrete (1:2:4) type B1 as required |
| 11 | Supply and fix 30 mm thick flush shutters, Factory Made solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | Supply and fix 35mm thick IInd class hard wood glazed skelton shutters Factory Made open rebated and prepared to receive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part - I section - 8, clause 8.20 (a). Supply and fix to chowkhat complete all as specified and directed. |
| 13 | Supply and fix II nd class HW, 35 mm thick plain framed Factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 14 | Supply and fix solid PVC door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm PVC sheet reinforced with MS square tube as per specification drying as per manufacture instructions including all necessary fitting complete all as specified and directed. |
| 15 | Supply and fix 30mm thick factory made solid panel PVC door shutters made out of MS tubes of top and bottom rail MS frame shall be covered with heat moulded PVC \\"C\\" channel 5mm thick and having width of 50mm for from stiles and H section of 100mm wide for the rails, the inner panel 6mm thick PVC sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm H junction. The size, design and pattern of the paneled shutter shall be proceed by GE / Eng-in-Charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete all as specified and directed. |
| 16 | Supply and fix anodised powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer in Charge. |
| 17 | Supply and fix powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engineer in Charge. |
| 18 | Supply and fix powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge. |
| 19 | Supply and fix power coated Anodised aluminium grill or guard bars fixed to aluminium window, weight not less than 2.82 kg/Sqm complete all as specified incl powder coating with powder coated colour as approved by GE complete all as specified and directed by Engineer -in- Charge. |
| 20 | Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge. |
| 21 | Supply and fix 4 mm thick sheet glass in repair, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadscomplete all as specified and as directed by Engineer in Charge. |
| 22 | Supply and fix 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed by Engineer in Charge. |
| 23 | Supply and fix 4 mm thick frosted sheet glass in repair, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadscomplete all as specified and as directed by Engineer in Charge. |
| 24 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and as directed by Engineer in Charge. |
| 25 | All as per item No. 23.00 but in repair. |
| 26 | Supply and fix 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed. |
| 27 | Supply and fix 150mm ordinary helical door spring incl. roller and roller plate complete all as specified and directed. |
| 28 | Supply and fix butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed. |
| 29 | Supply and fix butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed complete all as specified and directed. |
| 30 | Supply and fix 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified. |
| 31 | Supply and fix 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified. |
| 32 | Supply and fixing for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. |
| 33 | Supply and fixing for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. |
| 34 | Supply and fix 300mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 35 | Supply and fix Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 36 | Supply and fix Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 37 | Supply and fix steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed. |
| 38 | Supply and fix for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works and incl dismantling old iron/mild steel work, all as specified and as directed. |
| 39 | Material and labour in repair for 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice & other side balancing white lamination, fixed with screws to frame work as in cupboard shutters, shelves incl wooden beading at ends and sides complete all as specified and directed. |
| 40 | Supply and fix 125 mm Aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 41 | Material and labour for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 42 | Material and labour for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 43 | Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed |
| 44 | Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed |
| 45 | Material and labour for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | Material and labour for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 47 | Material and labour for preparation of old decorated surfaces of walls incl cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed. |
| 48 | Material and labour for Preparation of old surfaces of wall by Washing , rubbing down and stopping of distempered and apply one coat of oil bond distemper on wall by Roller complete all as specified and directed. |
| 49 | Supply and fix Aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all a specified |
| 50 | Material and labour for Virified Ceramic tiles light shade 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 51 | All the same as per here-in-above but vitrified tiles of size on vertical surfaces such as skirting and incl. rendering 15mm thick in C.M 1:3 and incl dismantling old floor tiles in vertical surface with bed, complete all as specified & directed |
| 52 | Supply and fix 15 mm bore steel tubes, 'medium grade', galvanised, with all fitting; laid in trenches including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified |
| 53 | Supply and fix 20 mm bore steel tubes, 'medium grade', galvanised, with all fitting; laid in trenches including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified |
| 54 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified |
| 55 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) complete all as specified |
| 56 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting notexc 10 cm girth complete all as specified and directed. |
| 57 | Supply and fix 15 mm bore chromium plated bib taps (fancy type) long neck, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 58 | Supply and fix 15mm bore pillar tap long neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed. |
| 59 | Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) complete all as directed |
| 60 | Supply and fix in repairs Stop/Angle valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 61 | Providing and fixing factory made uPVC white/ Off-white colour casement (Openable) window ( Area exceeding 1.00 sqm but not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured forpayment purpose.) |
| 62 | Providing and fixing factory made uPVG white/ Off-white colour Sliding window (Area not exceeding 2.00 sqm each) Three track made of extruded profiles ith wall thickness of 2.3mm (+ -0.2mm). Window rofile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 63 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 64 | Supply and fix 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 65 | Amount of credit of Rs. 84781.25 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender