Tender For Repair To Leakage/ Seepage Sunken From Wall,Shafts Repair Work & Other Connected Works In Airmen Mess, Sncos Mess, Desc Line, Dsc Md Accn, Madhur Milan, Offrs Mess & Offrs Living Accn Area Of 13 Brd And 16 Brd At Af Stn Palam Under Ge (Af)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Leakage/ Seepage Sunken From Wall,Shafts Repair Work & Other Connected Works In Airmen Mess, Sncos Mess, Desc Line, Dsc Md Accn, Madhur Milan, Offrs Mess & Offrs Living Accn Area Of 13 Brd And 16 Brd At Af Stn Palam Under Ge (Af) Gurgaon No 1
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-A |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises from MoD land, complete all as specified and directed BY Engr-in-charge. |
| 3 | Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed. |
| 4 | M&L for 20 mm thick rendering in CM 1:4 by on brick/concrete surfaces of sunken slab, mixed with liquid water proofing compound both floor and wall of sunken slab, the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. |
| 5 | Supply only liquid water proofing compound |
| 6 | M&L applying evenly two coat cemetious/liquid waterproofing coating on sunken slab/ceiling/wall as per manufacturer instructions including cleaning surface complete all as specified.. |
| 7 | M&L for cleaning the surface and after proper cleaning filling the cracks with polymer modified mortar using Dr fixit pidicrete URP and providing 50mmx50mm angle fillets on the vertical upstands, parapet wall junction corners, service units and properly dressed by preparing polymer modified mortar with DR Fixit pidicrete URP in the ratio of 1:3 by adding polymer 10% by weight of the cement, add the water little little unit the required consistency is achieved and thereafter providing and applying two coats of acrylic polymer modified cementitious coating Dr Fixit pidifin 2K of M/s Pidilite Industries having elongation at break 50% 5 bar resistance to positive water pressure, Adhesive strength ASTM D 7234-1 N/mm sq, water vapour transmission as per ASTM E96 of 030 perms and crack bridging ability as per EN 1062-7 upto 1 mm. Apply two coats of Dr Fixit pidifin 2K slurry “ coverage of 0.55-0.58 Sqm/kg of mix slurry. Provide and lay 45 gsm glass fibre mesh over the angle fillet when the first coat is still wet. Allow the first coat to dry for 6-8 hours, then apply the second coat at a direction perpendicular to first coat. Allow the coating to air cure for 5 days before conducting water ponding test for 24 hrs etc or other equivalent product as approved by GE in sunken area complete all as per the manfactures instruction, including removing rubbish material from building and thrown in low lying empty area at any distance out side MD land complete all as specified and as directed by Engineer-in-Charge |
| 8 | M&L providing for 40mm dia light grade GI spout at the lowest point with 30cm projection beyound the outer face of the wall in sunken floor complete all as specified and directed by Engr - in- Charge |
| 9 | M&L for PCC 1:5:10 type E2 Using 40mm graded stone aggregate as in filling under floor/sunken slab. |
| 10 | M&L Cement Concrete type B1,1:2:4 (20mm Graded Stone Aggregate) 25 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and fair with using Extra Cement, complete all as specified and as directed. |
| 11 | M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed. |
| 12 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors/ skirting ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 20 mm thick screed plaster in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 13 | M & L Coloured Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed |
| 14 | M & L Coloured Non Skid ceramic tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed by Engr-in-charge. |
| 15 | M&L for 10 mm thick Vitrified light shade Coloured tiles, square/ rectangular double polished, area of each tile n.exc. 0.36 sqm, in floor including 15 mm thick screed bed in CM 1:6 etc.,set and jointed in neat cement slurry and pointed in white with pigment to match for laying floor finishes all as specified and as directed by Engr-in-Charge. |
| 16 | M&L for 10 mm thick vitrified light shade coloured tiles (square/ rectangular) double polished, area of each tile not exc 0.36 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surface such as Skirting/ dado etc over and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed by Engr-in-charge. |
| 17 | M&L for glazed ceramic colour tiles on vertical surface 350 x 250 x 7 to 8 mm/ 450x350x7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over and including 15 mm thick rendering in CM 1:4, complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L Ultracharged Vitrified Ceramic tiles 600mm x 300mm x 10mm thick dark shade (square /rectangular) polished, on vertical surfaces/skirting/dadoo/wall cladding using chemical adhesives over and including 10mm thick rendering in CM 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and as directed by Engineer in charge |
| 19 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite over 15 mm thick screed bed in CM 1:4 including grinding, moulding rounnding and polishing bedding as in, window Cill, kichen self plateforms, steps etc complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for granite 20 mm thick machine cut in skirting/dado, wall cladding, on Columns and similar works over and including 10mm thick rendering in CM 1:4 on stone/brick masonry surfaces, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. |
| 21 | M&L for 18-20 mm thick machine cut kota stone slab flooring of size not less than 500 x 500 mm over 20 mm thick cement mortar (CM) 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 22 | M&L for 18-20 mm thick machine cut kota stone slab of size not less than 500 x 500 mm in riser of steps, skirting, dado and pillar over 15 mm thick rendering in cement mortar (CM) 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 23 | Cutting and grinding mirror polishing old kota stone/ green marble flooring including applying cement slurry to fill the existing joints complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 24 | Cutting and grinding mirror polishing old kota stone/ green marble flooring including applying cement slurry to fill the existing joints complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 18, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender