Tender For Repair/Replacement To Old Rusted Concertina Coil, Barbed Wire, Chain Link Fencing, Storm Water Drain, Steel Gates & Repair To To Security Wall At Afs Suryalanka
Tender Value
37.97 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guntur → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Old Rusted Concertina Coil, Barbed Wire, Chain Link Fencing, Storm Water Drain, Steel Gates & Repair To To Security Wall At Afs Suryalanka
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) all as specified and directed. |
| 2 | M&L for Reinforced cement concrete 1:2:4, Type B1, using 20mm graded stone aggregates as in Columns, pillars, piers, posts and struts all as specified and directed |
| 3 | M&L for Reinforced cement concrete 1:2:4 ,Type B1, using 20mm graded stone aggregates in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed |
| 4 | M&L for Reinforced cement concrete 1:2:4 ,Type B1, using 20mm graded stone aggregates using Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed |
| 5 | S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed |
| 6 | All as per item No.5 above but for TMT bar of 6 to 8mm dia all as specified and directed |
| 7 | All as per item No.5 above but for 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders all as specified and directed |
| 8 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surfaces of concrete all as specified and directed |
| 9 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed |
| 10 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified and directed |
| 11 | Taking down cement or cement lime plaster, any description, on brick walls including racking out joints hacking for key scrubbing down with water etc. all as specified and directed. |
| 12 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in two layers, first layer 10 mm thick in CM 1:6 and second layer 5 mm thick in CM 1:4 finishing even and smooth mixed with WPC as per manufacturer's instructions all as specified and directed. (Note : Water proofing compound shall be measured and paid separately). |
| 13 | Supply only of integral water proofing compound of approved make all as specified and directed. |
| 14 | M&L for preparing new plastered or uplastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade, two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer all as specified and directed. |
| 16 | M&L preparing old plastered or unplastered surfaces of walls including brooming down or wire brushing, scraping down and applying two coats of cement base paint complete all as specified and as directed. |
| 17 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. |
| 18 | M&L for Brickwork with sub-class `B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 all as specified and directed. |
| 19 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls etc including dismantling of old pipes complete all as specified and directed. |
| 20 | Demolition of Plain cement concrete of any description and in any position not otherwise specifically provided for etc, complete all as specified and directed. |
| 21 | M&L for Plain Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping and like including weathering, slightly rounded for chamfered angles and throating, all as specified and as directed |
| 22 | M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for gratings etc. complete all as specified and directed |
| 23 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 24 | M&L for Broken glass coping on top of walls in 25mm layer of cement mortar 1:3 complete all as specified and directed |
| 25 | M&L for removal of barbed wire fixed on angle in high security wall complete all as specified and directed |
| 26 | M&L for removal of concertina coil fixed on angle in high security wall complete all as specified and directed |
| 27 | M&L for REFIXING of barbed wire on angle in high security wall complete all as specified and directed item includes if necessary GI clips, strap, MS wire used to fix barbed wire |
| 28 | M&L for REFIXING of Concertina coil on angle in high security wall complete all as specified and directed item includes if necessary GI clips, strap, MS wire used to fix Concertina coil |
| 29 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed at 75mm spacing and staining and fixed to RCC precast fencing posts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc. complete all as specified and directed by Engineer-in-Charge. (Each line wire to be measured) |
| 30 | S&F in repair for Concertina coil of 600mm dia razor type made out of 2.5mm dia SG hot galvanised spring tensile wire 1400 to 1500 N/sqmm zinc coating 240 GSM/sqmm (min), weight of coil shall be minimum 8.5 kg/coil when being not stretched, stretch length of coil shall be 6.0 Rm after laying. min nos of turns in each coil shall be 50. Galvanised razor ribbon type shall be of size 0.5mm thick,20-22 mm wide before wrapping on central core wire. Concertina coil shall be fixed to angle iron swan neck supports using GI clips 125 to 127 Nos per coil and special nuts and bolts for holding coil together and extra two rows parallel wire of 10 gauge etc all as specified and as directed,Note:- Stretch length of concertina coil shall be measured in running metre. |
| 31 | M&L for preparation of old treated steel and iron surfaces of any description over 10cm in girth or with not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 32 | M&L for preparation of new untreated steel and iron surfaces of any description over 10cm in girth or with not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 33 | M&L for preparation of new untreated steel and iron surfaces of any description over 10cm in girth or with not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender