Tender For Repair/ Replacement Of 11 Kv Cable Including Joints, Transformer/Rmu Plinths, Fencing, 11 Kv Bus Bar Chamber, Vcb, Rmu, Battery Charger, Relay And Connected Items At Dk Part-I, 105 Ta, Rrrc, Icchamati Lines, Carriappa Vihar, Abdullah Dairy
Tender Value
48 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
10 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of 11 Kv Cable Including Joints, Transformer/Rmu Plinths, Fencing, 11 Kv Bus Bar Chamber, Vcb, Rmu, Battery Charger, Relay And Connected Items At Dk Part-I, 105 Ta, Rrrc, Icchamati Lines, Carriappa Vihar, Abdullah Dairy, Eme Stn Workshop, Kandhar Line, Taic, Int Fs, 202 Cedu, Kandhar Line Officer Enclave, 8711 Field Ceremonial Battery, Kv 4, Padmini Acharya Marg, Lorry Road, Terrier Hostel And Adjoining Area Of Age (U) Elect Supply No. Ii, Under Ge (U) Elect Supply, Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for returning filling including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified and directed by Engineer-in-Charge. Note : Measurement shall be taken after punning down. |
| 5 | Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1, flat size 300mmx 180mm x 40mm complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per srl item No 5 here-in-before but using old cable cover obtained under srl item No 1 here in before complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supplying, laying, jointing, testing and connecting in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 11 KV grade, IS 7098 marked, suitable for HT 11 KV(E) system, laid in trenches / ducts / encased in GI pipe / fixed to pole, including jointing & testing complete all as specified and directed by Engineer-in-Charge of following sizes :- |
| 8 | 95 sqmm 3 core. |
| 9 | 120 sqmm 3 core. |
| 10 | 150 Sqmm 3 Core |
| 11 | 185 sqmm 3 core |
| 12 | 240 sqmm 3 core |
| 13 | 300 sqmm 3 core |
| 14 | Material and labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe up to150 mm bore and making good both ends complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F in replacement of GI Pipe (light grade) with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by Engineer-in-Charge of following bore sizes :- |
| 16 | 150mm |
| 17 | 100 mm |
| 18 | Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size :- |
| 19 | 50 Sqmm to 95 Sqmm 3 core. |
| 20 | 120 Sqmm to 185 Sqmm, 3 core. |
| 21 | 240 Sqmm to 400 Sqmm 3 core |
| 22 | Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size :- |
| 23 | 95 Sqmm 3 core. |
| 24 | 120 Sqmm to 185 Sqmm, 3 core. |
| 25 | 240 Sqmm to 400 Sqmm 3 core |
| 26 | Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size :- |
| 27 | 95 Sqmm 3 core. |
| 28 | 120 Sqmm to 185 Sqmm, 3 core. |
| 29 | 240 Sqmm to 400 Sqmm 3 core Please Enable Macros to View BoQ information |
| 30 | 240 Sqmm to 400 Sqmm 3 core Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender