Tender For Construction Work Of Bhairon Gate Of Bhairon Temple, Bhairon Bazar, Belanganj, Agra. Part-C
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2026
2 days left
EMD
49120
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Bhairon Gate Of Bhairon Temple, Bhairon Bazar, Belanganj, Agra. Part-C
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation in ordinary Soil (Loam, Clay or sand) including, lift upto 1.50 M and lead Upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as per directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches.( Item No. 2.6.1 DSR-2023) |
| 2 | Providing and laying cement concrete in 1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work in foundation and floors. (DSR No. 4.1.8/2023) |
| 3 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 5.33.1 All works upto plinth level 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 4 | Providing and laying in position ready mixed or site batched design mix cement concrete forreinforced cement concrete work; using coarse aggregate and fine aggregate derived fromnatural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures inrecommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete tosite of laying, curing, carriage for all leads; but excluding the cost of centering, huttering,finishing and reinforcement as per direction of the engineer-in-charge; for the following gradesof concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shallbe payable separately. In case the cement content in design mix is more than 110% of thespecified minimum cement content, the contractor shall have discretion to either re-design themix or bear the cost of extra cement.All works above plinth level upto floor V level5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (DSR 5.22A.6 (2023) |
| 6 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backingfilled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) includingpointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing and the sides by means of cramps andpins which shall be paid for separately) :8.14.1 Red sand stone - exposed face fine dressed with rough backing.8.14.1.4 40 mm thick |
| 7 | Cost of CNC, engraving on stone of any thickness required for precise carving wherever required of approved depth as per design approved from Arhcitect in charge including cost of designing, for overall mural including the cost of labour involved in day to day fabrication and processing of Artistic work PSR |
| 8 | 8.8 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type.8.8.1.2 Fastener with threaded dia 10 mm |
| 9 | 14.72 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for5.9.1 Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for5.9.5 lintels, beams, plinth beams, girders, bressumers and cantilevers(DSR-2023) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for5.9.6 columns, pillars, piers, Abutments, posts and Struts (DSR-2023) |
| 13 | Stone work plain ashlar in arches in super structure upto floor V level in cement mortar 1:3 (1cement : 3 coarse sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Both face dressed7.13.2.1 Red sand stone (DSR 2023) |
| 14 | Traffice Cone: Supply of red fluorescent with with reflective sleeve traffic cone a squre base of 300 to 500 mm & Thickness 35 mm and a heiht of 100/750/500 mm. Thay shall be brilliant red / orange / yellow and shall be made of LDPE material that can be struck without causing damage to impacting vehicles. Retro-Reflect orization of cone shall be provided by a 150 mm wide white band located 75 to 100 mm from the top of the cone and additional 100 mm wide white band located approximately 50 mm below the 150 mm band. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge.1000 mm height (Cha.-8 S.I No. 22, SOR 2025-26) |
| 15 | Supply and Fixing of red sand stone sculpture with 900 mm height design as per E/I. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender