Tender For Providing, Supplying And Fixing Of Custom-Designed Handcrafted Marble And Brass Sculptures With Intricate Artistic Carving, Finishing And Installation At Mahakal Mokshdham Purani Chungi Ajmer Road.
Tender Value
24.94 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
4 days left
EMD
49894
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Supplying And Fixing Of Custom-Designed Handcrafted Marble And Brass Sculptures With Intricate Artistic Carving, Finishing And Installation At Mahakal Mokshdham Purani Chungi Ajmer Road.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 1st quality standard custrnised colourful glazed tiles tiles (as directed by engineer in charge ) of size 1200mm X 600mm in outer/inner wall,pillars etc.laid on a bed of neat cement slurry or 1st quality paste with flush pointing in the white cement mix with pigment to match the shade of tile complete as per design approved by engineer in charge. |
| 2 | Brass Standing Lord Shiva Providing, supplying and fixing custom-designed premium quality handcrafted Brass Standing Lord Shiva Statue of overall size 30” × 20” × 90” and approximate weight 183.50 kg, manufactured from high-grade solid brass by traditional lost-wax casting process, complete with heavy-duty ornamental brass pedestal/base. The statue shall be meticulously handcrafted by skilled artisans with intricate detailing, fine chasing, engraving, embossing and superior antique finish, ensuring excellent artistic workmanship and structural stability. The complete sculpture shall be treated with protective lacquer coating to provide long-term resistance against corrosion, oxidation and environmental exposure. The scope of work includes design development, mould preparation, casting, machining, hand finishing, polishing, quality inspection, packing, transportation, loading, unloading, lifting, installation, anchoring with suitable stainless steel anchor bolts, non-shrink grouting, alignment, testing and all incidental works required for complete installation at the designated location. The item shall be complete in all respects as per approved design, specifications and directions of the Engineer-in-Charge.1. Brass Standing Lord Shiva Providing, supplying and fixing custom-designed premium quality handcrafted Brass Standing Lord Shiva Statue of overall size 30” × 20” × 90” and approximate weight 183.50 kg, manufactured from high-grade solid brass by traditional lost-wax casting process, complete with heavy-duty ornamental brass pedestal/base. The statue shall be meticulously handcrafted by skilled artisans with intricate detailing, fine chasing, engraving, embossing and superior antique finish, ensuring excellent artistic workmanship and structural stability. The complete sculpture shall be treated with protective lacquer coating to provide long-term resistance against corrosion, oxidation and environmental exposure. The scope of work includes design development, mould preparation, casting, machining, hand finishing, polishing, quality inspection, packing, transportation, loading, unloading, lifting, installation, anchoring with suitable stainless steel anchor bolts, non-shrink grouting, alignment, testing and all incidental works required for complete installation at the designated location. The item shall be complete in all respects as per approved design, specifications and directions of the Engineer-in-Charge. |
| 3 | Brass natraj Providing, supplying and fixing custom-designed premium quality handcrafted Brass Nataraja Statue of overall size 60” × 14” × 73” and approximate weight 166.26 kg, complete with intricately designed Prabhavali (ornamental circular halo) and heavy-duty ornamental brass pedestal/base. The statue shall be manufactured from high-grade solid brass using the traditional lost-wax casting process and meticulously handcrafted by skilled artisans with intricate detailing, fine chasing, engraving, embossing and superior antique finish to achieve exceptional artistic quality. The complete sculpture shall be treated with a high-performance protective lacquer coating to ensure long-term resistance against corrosion, oxidation and environmental exposure. The scope of work includes design development, mould preparation, casting, machining, hand finishing, polishing, quality inspection, packing, transportation, loading, unloading, lifting, installation, anchoring with suitable stainless steel anchor bolts, non-shrink grouting, alignment and all incidental works required for complete installation at the designated location. The item shall be complete in all respects as per approved design, specifications and directions of the Engineer-in-Charge. |
| 4 | Brass shivling with seshnag Providing, supplying and fixing custom-designed premium quality handcrafted Brass Shivling complete with intricately sculpted multi-hooded Sheshnag, decorative Jalhari and ornamental brass pedestal/base of overall size 20” × 15” × 25” and approximate weight 29.38 kg, manufactured from high-grade solid brass using the traditional lost-wax casting process. The complete sculpture shall be meticulously handcrafted by skilled artisans with intricate detailing, fine chasing, engraving, embossing and superior antique finish, ensuring excellent artistic workmanship and dimensional accuracy. The sculpture shall be treated with a high-performance protective lacquer coating to provide long-term resistance against corrosion, oxidation and environmental exposure. The scope of work includes design development, mould preparation, casting, machining, hand finishing, polishing, quality inspection, packing, transportation, loading, unloading, installation, anchoring with suitable stainless steel anchor bolts wherever required, alignment and all incidental works necessary for complete installation at the designated location. The item shall be complete in all respects as per approved design, specifications and directions of the Engineer-in-Charge. |
| 5 | Brass garuda Providing, supplying and fixing custom-designed premium quality handcrafted Brass Garuda Statue of overall size 18” × 15” × 27” and approximate weight 42.43 kg, complete with artistically designed ornamental brass pedestal/base, manufactured from high-grade solid brass using the traditional lost-wax casting process. The statue shall be meticulously handcrafted by skilled artisans with intricate detailing, fine chasing, engraving, embossing and superior antique finish, ensuring exceptional artistic workmanship, dimensional accuracy and structural stability. The complete sculpture shall be treated with a high-performance protective lacquer coating to provide long-term resistance against corrosion, oxidation and environmental exposure. The scope of work includes design development, mould preparation, casting, machining, hand finishing, polishing, quality inspection, packing, transportation, loading, unloading, lifting, installation, anchoring with suitable stainless steel anchor bolts wherever required, alignment and all incidental works necessary for complete installation at the designated location. The item shall be complete in all respects as per approved design, specifications and directions of the Engineer-in-Charge. |
| 6 | Providing, supplying and fixing 08 Nos. hand-carved statues of Kankali Mata, Bhairu Ji, Mahakali Mata , Lord Shiva, Kshetrapal Ji, Raja Harishchandra, Ganga Mata and Yamraj Ji, made of approved quality White Marble and Black Marble, each of size 21 inch (Height) × 4 inch (Width), including fine carving, dressing, polishing, loading, unloading, transportation, and fixing complete in all respects as per the directions of the Engineer-in-Charge |
| 7 | 8 Channel Network Video Recorder (NVR) Providing, supplying, installing, testing and commissioning of 08 Channel Network Video Recorder (NVR) suitable for IP-based CCTV surveillance system, complete with H.265/H.265+ video compression, HDMI/VGA output, network interface, power supply, configuration, testing and commissioning, including all accessories, hardware and incidental works required for satisfactory operation, complete in all respects as directed by the Engineer-in-Charge. |
| 8 | IP Dome Camera Providing, supplying, installing, testing and commissioning of IP Dome Camera of approved make, complete with HD image sensor, IR night vision, vandal-resistant housing, PoE support, weather-resistant enclosure (where applicable), mounting accessories, configuration, testing and commissioning, including all incidental works required for proper functioning, complete in all respects as directed by the Engineer-in-Charge. |
| 9 | 8 Channel PoE Switch Providing, supplying, installing and commissioning of 08 Port PoE (Power over Ethernet) Network Switch suitable for IP CCTV system, complete with power supply unit, network ports, surge protection, mounting accessories, configuration, testing and all necessary accessories required for satisfactory operation, complete in all respects as directed by the Engineer-in-Charge. |
| 10 | 1 TB Surveillance Hard Disk Providing, supplying and installing 1 TB Surveillance Grade Hard Disk specifically designed for continuous 24×7 CCTV recording applications, complete with formatting, installation inside the NVR, configuration, testing and commissioning, including all incidental works required for proper recording and storage, complete in all respects as directed by the Engineer-in-Charge. |
| 11 | RJ-45 Connectors and Network Accessories Providing, supplying and fixing RJ-45 connectors, connector boots and all necessary networking accessories for termination of CAT-6 cables, complete with crimping, testing, labeling and commissioning, including all incidental works required for proper connectivity of the CCTV surveillance system, complete in all respects as directed by the Engineer-in-Charge. |
| 12 | PA Amplifier / Sound System Providing, supplying, installing, testing and commissioning of Public Address (PA) Amplifier/Sound System of approved make and suitable capacity, complete with microphone inputs, audio controls, power supply, protection circuitry, mounting accessories, wiring connections, testing and commissioning, including all incidental works required for satisfactory performance, complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Wall Mount Speaker Providing, supplying, installing, testing and commissioning of Wall Mount Speaker of approved make and suitable wattage, complete with mounting brackets, fixing hardware, wiring connections, testing and commissioning, including all incidental works required for proper operation, complete in all respects as directed by the Engineer-in-Charge. |
| 14 | Installation, Testing & Commissioning Providing labour, tools, tackles and consumables for complete installation, testing and commissioning of CCTV Surveillance and Public Address System, including equipment mounting, alignment, system configuration, functional testing, integration, trial run, user demonstration and all incidental works required for satisfactory operation of the complete system, as directed by the Engineer-in-Charge. |
| 15 | Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 16 | Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:6 (1 cement : 6 fine/ coarse sand) |
| 17 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 18 | Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing. |
| 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 21 | Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides. |
| 22 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5.50 mm thickness |
| 23 | Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) :Red sand stone - Exposed face fine dressed with rough backing.30 mm thick. |
| 24 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jhunjhunu / Jalore (Red / Choclate Colour) Upto to 1500 Cm2 Tiles Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender