Tender For Supply Installation & Commissioning Of The Vertical Flange Mounted Agitator Gear Box Assembly At Alum Vat No 3 & 6 Under 100Mgd Clarifier Plant, Igwtp.
Tender Value
4.92 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
2 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation & Commissioning Of The Vertical Flange Mounted Agitator Gear Box Assembly At Alum Vat No 3 & 6 Under 100Mgd Clarifier Plant, Igwtp.
BOQ
| Sl. No. | Item Description |
| 1 | MANUFACTUREING & SUPPLY OF COUPLING MADE OF SS-316, OD-200MM,ID-45 MM, KEY SIZE-12X12X6 MM. FLANGE THICKNESS 89- WITH NECCESSARY MACHINING & DRILLING ASPER DRAWING & DIMENSION OF AGITATOR SHAFT AS PER DIRECTION OF EIC. |
| 2 | MANUFACTUREING & SUPPLY OF TEFLON BUSH, OD-80 MM, HEIGHT-80MM,ID-60 MM AND CORE IS TEFLON OD-80 MM, HEIGHT-95 MM, HOLE-40 MM |
| 3 | DISMANTLING THE EXSTING VERTICAL FLANGE MOUNTING HEAVY DUTY INLINE HELICAL GEAR BOX MOTOR THE COMPONT OF THE FABRICATED PLANTFORM STAINLESS STEEL AGITATOR PEDAL ASSEMBLY ETC OF ALUM VAT ONE CAUTIOUSLY AS THE DIRECTION OF EIC |
| 4 | MANUFACTURING SUPPLY & FITTING & FIXING OF THE STAINLESS ATEEL BLADE SS-316 WITH 8 MM X 550 MM LONG BRACKET 100X270X8 MM THICK |
| 5 | GEAR MOTOR-GEAR BOX MAKE-PREMIUM STEPHEN)IN TECHNICAL COLLABORATION WITH STEPHEN GERMANY)VERTICAL FLANGE MOUNTED TYPE INLINE HELICALGEARED MOTOR,MODEL MIVE-203/27.74/250-28 GEAR RATIO-27.74:1 MOTOR-MAKE CROPMTON GRAVES WITH 2.2 KW/3 HP AC 3PH,4 POLE,415 V,50 HZ ,RPM-51.20,MIVE 203, TEFCIF2 MOTOR WITHOUT 1ST FILL LUBRICANTS. |
| 6 | MANUFACTURING SUPPLY & FITTING & FIXING OF THE STAINLESS STEEL SHAFT SS-316 SCHEDULE HOLLOW PIPE. NB-40MM AND 4 MT LONG WITH SOLID STUB END HAVING NB-45 MM AND HEIGHT- 250MM WELDED ON BOTH END OF HOLOW SHAFT. |
| 7 | BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 2. Dismantling all types of plain cement concrete works, stackingserviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof (b) above 150 mm. thick |
| 8 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 1. Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation (a) 1:3:6 proportion. ( 3rd Corrigenda & addenda dated 04.06.2018) |
| 9 | BUILDING WORKS ( C ) Brickworks,Concrete Works etc.40..Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.I. SAIL/ TATA/RINL. |
| 10 | BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 13. Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 11 | SECTION 1. ------------BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster |
| 12 | SECTION 1. ------------BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 8 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (b) Two Coats [This item to be done under specific instruction of the Superintending Engineer]N.B.:-Extra for each additional floor in external walls refer item 1 of subhead C |
| 13 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 7. Supplying, fitting, fixing bolts with nuts, washer (ii) 20 to 25 mm dia bolt: (a) Length up to 75 mm dia: (3rd Corrigenda & addenda dated 04.06.2018) |
| 14 | CHAPTER - VII MISCELLANEOUS ITEMS Coating of 'Epoxy' Resin of thickness not less than 160 micron with a lowviscosity,crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal,concrete and wood surface to protect from corrosion as well as damagefrom chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of ElC. [This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] |
| 15 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 18)Fitter Mechanic (Helper). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 16 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 17)Fitter Mechanic. Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 17 | MATERIALS AND LABOUR 1. Building (B) Labour Rates Per Diem : 3)Mazdoor (Male). Note: (I)The above rates of labour are exclusive of 10% contractors profit and 1% Labour welfare cess which would be admissible to the Contractors, but contractual percentage will not be applicable. (II) The workersemployed on high rise building or any structure over 30 ft in height and also workers engaged in Tunnel shall be paid 20% extra wages. |
| 18 | Sub Total |
| 19 | GST 18% |
| 20 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender