Tender For Providing Deep Borewell With Submerssible Motor Arrangements And Main Pipe Line At Bharathiyar Street Ward No.17 Thirunindravur Municipality
Tender Value
7 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
8 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Deep Borewell With Submerssible Motor Arrangements And Main Pipe Line At Bharathiyar Street Ward No.17 Thirunindravur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Towards cost of Geophysical investigation survey charges. |
| 2 | Supply and delivery of 200mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` |
| 3 | Supply and delivery of 150mm dia of (Casing medium) PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make |
| 4 | Supply and delivery of 150mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` |
| 5 | Drilling of 200mm dia bore wells any where is chengalpattur district including tranportion from one place to aother place with in this district in alluvial soil or sedimentrary starata using rotary rig by first drilling a pilot bore of 150 mm dia by direct rotary mud circulation method using contractors rig tool fuel, labour drillng bentonite mud and water required for drilling, |
| 6 | Drilling 150mm dia pilot bore to the required depth Below ground level. |
| 7 | Supply and delivery of 200mm dia(8”) PVC end cap including cost and conveyance etc., complete |
| 8 | Reaming from 150mm dia pilot bore to 200mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level |
| 9 | Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 200mm dia PVC casing pipe |
| 10 | Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method. |
| 11 | Supply and Fixing of 7.50 HP Motor Submersible Pump set ISI mark IS 8034Without panel board 75LPM and 60M Head including Fixing Charges and all Charges etc. Complete.(Rate with TNVAT @4% on Basic cost Excise Duty) |
| 12 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 13 | Supply and Delivery of 4 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc |
| 14 | Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days 2 HP Plat form All round |
| 15 | Supply and run off 4 to 6 Sq.mm polythene insulator and PVC sheathed (Heavy Duty) service meter Aluminium cable of 1100 V grade on bearer wire for servive connection mains (TWAD Sl.no.12.0) |
| 16 | Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete |
| 17 | MS Pipe clamp set (TWAD S.No.5.1) |
| 18 | 2\\" dia pvc bend (SOR Sl.No.395C) |
| 19 | 2\\" dia G.I Elbow (TWAD S.No.5.2) |
| 20 | 2\\" dia G.I Union (TWAD S.No.5.2) |
| 21 | 2\\" dia gate valve (TWAD S.No.5.2) |
| 22 | 2\\" U Pvc Pipe (TWAD) |
| 23 | saddle piece (TWAD S.no.5.1b) |
| 24 | Supply delivery and Fixing of Nylon Rope for bor well Including Cost and conveyance of material and labour charges for Laying and Jointing of pipes, Testing and labour charges etc., (PWD Shedule of Rate Page No.105 Ityems No.112) |
| 25 | Earth work excavation in all types of strata for laying of pipes with the stanard trench width as per Board circular No.28/AE10/P&D /2001/dt 1.10.2001 & JCE (P&D) Lr.No.LM/AE 10/P&D/2001/Dt.22.11.2001 |
| 26 | 90mm dia |
| 27 | Supply of unplasticised PVC rigid pipes as per BIS 4985-1988 including of all charges etc complete as per standard specification. |
| 28 | 90mm PVC 6Ksc pipes |
| 29 | Supply of PVC Specials as per BIS 10124 - 1988 part 1 to 13 including of all charges etc complete as per standard specification. |
| 30 | 90mm PVC equal tee |
| 31 | 90mm PVC elbow |
| 32 | 90mm PVC end cap |
| 33 | 90mm PVC Coupler |
| 34 | Conveying the PVC pipes and specials to trench, lowering into the trenches, laying to proper grade and alignment, jointing with PVC coupler and specials fixing with neat cement paste and testing to the required pressure as per IS including conveyance of water from 1Km lead for filling during testing. 90mm dia |
| 35 | 90mm dia |
| 36 | Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested |
| 37 | 90mm dia |
| 38 | G.M. Gate valves |
| 39 | 80mm dia |
| 40 | G.M. Non Return valves |
| 41 | 65mm dia |
| 42 | Electrification charges for EB service connection Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender