Tender For Providing 3Nos Of New Borewell With Motor And Water Supply Arrangements To Poojapuravilai Water Source In Kanniyakumari Municipality
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Aug 2026
8 days left
EMD
15400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing 3Nos Of New Borewell With Motor And Water Supply Arrangements To Poojapuravilai Water Source In Kanniyakumari Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Providing 3nos of new borewell with motor and water supply arrangements to Poojapuravilai water source in Kanniyakumari Municipality |
| 2 | Provisions for geo- physical srvey charges |
| 3 | Drilling of bore well of size mm (4\\" to 5\\") sedimentary formation using hand base sets including insertion of casing pipes etc. including and packing of pebbles and coveyancce of hand bore set including loading and uploading. |
| 4 | Supply and delivery of following bore well casing pipes and specials |
| 5 | 200 mm RS PVC casing pipe |
| 6 | 150 mm RS PVC casing pipe |
| 7 | 150 mm bore end cap |
| 8 | Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer WD-W0772 |
| 9 | Supply and delivery of clear water vertical wet type 150pm 125m (7.5hp) submersible pumpset suitable for 150mmdia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ+/- 5 % WD-M1663 |
| 10 | Supply and delivery of 7.5hp Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operatedAmmeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). WD-M1915 |
| 11 | Supply and delivery of flat type 4 sq mm PVC sheathed 3 core conductor cables cablesconforming to IS 694 / 1990 with ISI marking suitable for submersible pumb sets etc completed. |
| 12 | Supply and delivery of following PVC/GI pipes and specials |
| 13 | 50 mm 'U' PVC pipe |
| 14 | 50 mm adopter |
| 15 | 50 mm clamp set |
| 16 | 50 mm GI elbow |
| 17 | 50 mm GI Coupling |
| 18 | 50 mm GI hex nipple |
| 19 | 50 mm GI Pipe nipple |
| 20 | 50 mm GI Flange set |
| 21 | 50mm GM non return valve |
| 22 | 50mm gate valve |
| 23 | 25mm PVC Pipe |
| 24 | 25mm PVC Elbow |
| 25 | 25mm PVC coupler |
| 26 | 25mm PVC Tee |
| 27 | 25mm GI Service pipe |
| 28 | 25mm PVC Bend |
| 29 | 50mm HDPE PN6 pipe |
| 30 | 50mm HDPE PN6 90 degree Bend |
| 31 | 50mm HDPE PN6 equal Tee |
| 32 | 90mm HDPE PN6 pipe WD-M0187 |
| 33 | 90mm HDPE 90 degree Bend WD-M0285 |
| 34 | 90mm HDPE equal Tee WD-M0285 |
| 35 | Jointing HDPE pipe 50mm PN 6 |
| 36 | Jointing HDPE pipe 90mm WD-W0618 |
| 37 | Nylon rope |
| 38 | 63Amps Fuse Carrier |
| 39 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10 m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc completed complying with SS 20B. TNDSS No.23&24 |
| 40 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10 m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc completed complying with SS 20B. For HDPE pipe laying |
| 41 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 42 | Brick work in cement mortar 1:5 (one cement and five sand) using country bricks of size 8¾\\"x4¼\\"x2¾\\" including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification |
| 43 | Plastering walls with cement mortar 1:5 mix (one cement and five sand) 12 mm thick including all cost and conveyance of all materials and all labour charges for curing and all other incidental charges etc., complete as per standard specification. |
| 44 | Painting two coats with ready mixed plastic exterior emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc, complete as per standard specification. |
| 45 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 46 | Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with PWD Earthing SD 639 |
| 47 | Supply and run of 4 of 4sq.mm.PVC insulated SCunsheathed FRLS copper conductor of 1100V grade on 7/20GI bearer wire for service connection mains SD 67 |
| 48 | Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, of panel board consisting of TPICN switches starter, coltmeter, Ammeter, three pilot (indicating) lanps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. |
| 49 | Lowering and laying of 50mm HDPE pipe WD-W0429 |
| 50 | Lowering and laying of 90mm HDPE pipe WD-W0430 |
| 51 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 52 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender