Tender For Desilting And Removing The Silt In Infiltration Well And Repairs To Porus Concrte In Vadakarai Pumphouse And Supply, Delivery Submersible Pump At Ward No:03 In Kalakad Municipality.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Aug 2026
6 days left
EMD
11000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Desilting And Removing The Silt In Infiltration Well And Repairs To Porus Concrte In Vadakarai Pumphouse And Supply, Delivery Submersible Pump At Ward No:03 In Kalakad Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete. |
| 2 | Dewatering using 7.5HP tdiesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete. |
| 3 | Supplying and filling up the empty cement gunnybags with sand, stitching them, conveying the same to site and stacking as directed within a lead of 10m excluding cost of bags, Jute, Thread, needle, sans etc., (Cost os crusher sand 0.0354 X 1944.89 + Empty gunny bag 5.00 + Labour charges 10.05 (W-0115) = 84.21/Bag) |
| 4 | Hire charges for deploying earth moving machinery(Poclain) for earthwork including diesel, oil and labour charges etc., complete. |
| 5 | Supply and delivery of 100mm G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 including cost and conveyance to site and all other incidental charges therefore etc complete |
| 6 | Supply and delivery of G.I. SPECIALS AS PER IS 1239/PART II including cost, conveyance and all other incidental charges therefore etc complete -For 100mm G.I. Equal Elbow plain |
| 7 | For 100mm G.I.Flange set |
| 8 | For 100mm G.I.Bend |
| 9 | For 100mm M.S.Clampset |
| 10 | Lowering GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials and as directed by the TWAD Officers |
| 11 | OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220 / 2002 WITHOUT PANEL BOARD Supply and delivery of Open well Submersible pump set conforming to IS 14220 / 2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. |
| 12 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter,Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 13 | Supply and delivery of 100mm NON RETURN VALVESConforming to IS as per IS with ISI marking . |
| 14 | Supply and delivery of 100mm CI Sluice valves Non Raising Spindle Type to pressure rating of 1.6 PN to be used in pump house (Long Body/ Long face to face)Conforming to IS as per IS with ISI marking . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender