Tender For Conservation / Restoration Of Historical Shrine Khanqahi Moula Of Mir Syed Ali Hamdani (Ra) On Heritage Pattern, Srinagar(Adv. Cost Rs. 493.71 Lacs) (Incl Cost Of Material+Gst)
Tender Value
4.93 Crore
Estimated cost
Bid Submission
25 Aug 2026
15 days left
EMD
9.87 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conservation / Restoration Of Historical Shrine Khanqahi Moula Of Mir Syed Ali Hamdani (Ra) On Heritage Pattern, Srinagar(Adv. Cost Rs. 493.71 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Conservation & Chemical Preservation of Heritage Woodwork |
| 2 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etccomplete as per directions and approval of Engineer-in-charge. Theelevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. NOTE:- To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done |
| 3 | Cleaning of decorative heritage woodwork (Pinjrakari/Carvings) to remove surface accretions, oily soot, dust, and bird droppings. The process involves dry cleaning using soft bristle brushes and vacuum cleaners, followed by wet cleaning using a solution of Non-Ionic Detergent (Teepol/Extran, 1-3% concentration) and distilled water. The work must be executed by skilled artisans using cotton swabs/sponges. Strictly prohibited: Use of wire brushes, scrapers, caustic soda, or high-pressure water jets. The rate includes all labor, chemicals, machinery hire, and working at heights.\\"The contractor must submit a laboratory test certificate for the specific batch used.\\" |
| 4 | Supply and application of a broad-spectrum, colorless, non-staining Biocidal Preservative (Boron-based or Permethrin formulation) to the cleaned wood surface. The application shall be done by brush or injection (using syringes in flight holes) to protect against termites, borers, and fungal decay. The solution must be non-film forming to allow the wood to breathe. The rate includes the cost of chemicals, PPE for workers, and application labor.\\"The contractor must submit a laboratory test certificate for the specific batch used.\\" |
| 5 | Repairing decayed or structurally compromised portions of beams, eaves (Chajjas), or columns by the method of Splicing. The work involves carefully cutting out the rotted timber and inserting a new piece of First Class Seasoned Deodar Wood (Cedrus deodara). The new wood must match the grain, density, and color of the original. The joint shall be a traditional Scarf Joint or Tabled Joint, secured with wooden dowels or reversible adhesive (PVA). No metal nails/screws are allowed. The surface of the new wood must be hand-planed to match the existing texture. |
| 6 | Consolidation of minor fissures, shakes, and cracks (width 2mm to 10mm) in the timber members. The filler material shall be a paste made of fine Deodar sawdust mixed with a reversible conservation-grade adhesive (e.g., Paraloid B-72 or suitable PVA). The paste must be tinted to match the surrounding wood patina. The filling should be slightly recessed to distinguish it from the original wood upon close inspection (as per conservation ethics). |
| 7 | Surface finishing of the conserved wood using a traditional protective coating. The mixture shall consist of Double Boiled Linseed Oil and Pure Turpentine Oil in a 1:1 ratio. It shall be applied in two coats with an interval of 24 hours between coats, using lint-free cotton rags. The aim is to nourish the wood and restore its hydrophobic properties without creating a glossy or plastic-like film. Excess oil must be wiped off after 30 minutes of application.\\"The contractor must submit a laboratory test certificate for the specific batch used.\\" |
| 8 | Providing and applying a specialized Transparent Intumescent Fire-Retardant Coating suitable for heritage timber. The coating must be certified Class 1 / Class A (flame spread index). It should dry to a clear, matte/satin finish that does not obscure the wood grain or alter the historic character. The application shall be done by spray or brush as per manufacturer specifications to achieve the required micron thickness (DFT). The rate includes surface preparation and material cost.\\"Transparent Intumescent Coating tested to BS 476 Part 7 (Class 1) or ASTM E84 (Class A) standards. The contractor must submit a laboratory test certificate for the specific batch used.\\" |
| 9 | CONSTRUCTION OF FIRE AND EMERGENCY Quarter AT KHANKAHI MAULA |
| 10 | Clearing of site of construction / Levelling of ground and surface dressing with Manual Labours incl. removing of inequalities and stacking of serviceable material and disposal of unserviceable material/ rubbish.all complete job as per directions of Engineer-in-Charge. |
| 11 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.All kinds of soil : |
| 12 | Providing and laying Stone solling in Foundation trenches / inside plinth including compacting, watering Including cost of carrriage and head loads . Etc complete . |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 aggregate 40mm nominal) Nallah aggregates excld. carriage of materials involved. |
| 14 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 aggregate 20 mm nominal size) Nallah aggregates, excld carriage of materials involved. |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: in 1:3:6 (1 Cement : 3 coarse sand : 6 aggregate 40 mm nominal size ) Nallah aggregates, excld. carriage of materials involved. |
| 16 | Reinforced Cement Concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 stone aggregate of 20mm normal size aggregate. Nallah aggregates excld carriageof materials. |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) excld.carriage of bricks |
| 18 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 19 | Providing and fixing of wood work in frames of doors windows clestory windows wrought frame of first class imported wood /KD wood. Including cost of carrriage and head loads . Etc complete . |
| 20 | Providing and fixing flat iron hold fast including fixing of frames with nuts and bolts/Nails.Including cost of carrriage and head loads . Etc complete . |
| 21 | Centering and shuttering including strutting propping etc. removal of form work . Including cost of carrriage and head loads . Etc complete .Foundation, plinth |
| 22 | B) Lintal / Beams :- |
| 23 | C) Edge of Slab |
| 24 | D ) Beams /suspended floors/ Landings:- |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 26 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 27 | Providing colour coated high Rib color coates GS sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers file with white lead and including Ridges and valleys all complete job (upto a pitch of 60 degrees), excluding the cost of purlins, rafters and trusses.0.50mm thick . all carriages of material involved & head load complete job. |
| 28 | 12mm thick cement Plaster in 1:6 (1 cement: 6 Sand) mix. |
| 29 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate |
| 30 | Supply, Placing and fixing in position network of 25mm PVC Conduit pipes by making recesses in walls and Rcc work connecting with deep junction lighting boxes with necessary bends and other fittings in RCC Work.Including cost of carrriage and head loads . Etc complete job. |
| 31 | Providing and fixing glazed shutters for doors, windows and clerestory windows including 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm important kail wood. |
| 32 | Providing and fixing panelled & glazed shutters for doors, windows and clerestory windows including Panelling of Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete job. 30mm important kail wood |
| 33 | Providing/fixing 3.5mm thick glass panes.Including beading, nails and cost of carrriage complete . |
| 34 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Anodized Aluminium fittings)Tower Bolt 100 mm |
| 35 | Tower Bolt 150 mm |
| 36 | Handle 125 mm |
| 37 | Handle 150 mm' |
| 38 | 150 mm hook and eyes |
| 39 | L-DROPS |
| 40 | Finishing walls with water proofing cement paint of approved brand and manufacture & of required shade to give an even shade New work (2or more coats)[email protected]/10sqm .Including cost of carrriage and head loads . Etc complete . |
| 41 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 43 | Providing & Fixing C.P. sink mixer of approved make jaguar/hindware/cera including cutting and making good the walls wherever required. |
| 44 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shad. 16mm |
| 45 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board. 610x510mm bowl depth 200mm |
| 46 | Filling available excavated earth in trenches , plinths , sides of foundation etc . In layers not exceding 20cm in depth consolidating each layer by ramming and watering lead upto 50m lift upto 1.50m |
| 47 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 48 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 49 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 50 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 51 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 52 | Carriage of materails By Mech.Transport, from source to site of work incl. loading, unloading and stacking of materials at site of work.Sand for an avg lead of 15 km including HeadLoad |
| 53 | Stone agg. for an avg lead of 15 km including HeadLoad |
| 54 | Cement/Steel for an avg lead of 30 km including HeadLoad |
| 55 | Bricks avg lead of 20 km including HeadLoad |
| 56 | CONSTRUCTION OF FIRE AND EMERGENCY Quarter AT KHANKAHI MAULA |
| 57 | Dismantling wooden boardings in lining of ceiling /paper machie, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm. |
| 58 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : 15.14.1 Of sectional area 40 sqcm. and above. |
| 59 | Engagement of labours for removal of old damaged ceiling and damaged CGI sheets incl. disposal of unserviceble materials |
| 60 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : 9.41.2 First class deodar wood. |
| 61 | P/F OF 12MM THICK PLYWOOD CEILING incl. FRAMEWORK 2\\"x1.5\\" section with MS screw of imported kail wood all complete job. |
| 62 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Design as per EIC. |
| 63 | Heritage paper machie with Islamic calligraphy over prepared surface as per the design & pattern available at site and as per the direction of Engineer - in-charge including cost & carriage of all materials involved complete job. |
| 64 | French Spirit Polishing, Two or more coats on new works including a coat of wood filler. |
| 65 | Melamine Polish on wood work(one or more coat) |
| 66 | Renewing glass panes, with wooden fillets wherever necessary : 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 67 | Refixing of already available electrical fixtures(Light/Fan/Flood Lights/Surface lights) at site after dismantling/shifting including necessary wiring connection,6A modular switchpvc channel,clamps,fixing accessories with 1.5sqmm FRLS Cu Wire etc all complete as required. |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on new work |
| 69 | 999.1194561 P/F of ornamental eaves boarding (300x32mm) of 2nd class deodar wood as per the approved pattern and design including cost of nails / screws and scaffolding charges / PU polish over prepared base / finishing to be approved by Engineer in charge complete in all respects |
| 70 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) |
| 71 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80 mm thick with zinc coating not less than 275 gram/m2 |
| 72 | Providing and fixing of Rain Water pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.150mm |
| 73 | Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. 110MM |
| 74 | Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungue, monkey beats, vegetable growth etc. including providing, applying and washing the surface with liquid ammonia chemical of 5% solution and other chemical cleaning agents as approved by Archaeological survey of India/Engineer-in-charge, of approved brand and manufacturer with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica and finally washing the surface with clean water with the help of pressure jet machine, windows door etc, by suitable covering so as to avoid any damage to the building/structure, all as per directions of Engineer-in-charge(the rate is inclusive of all materials and labours involved except scaffolding) |
| 75 | Applying two or more coats of Ethyl silicate chemicals as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sun light by suitable means during application, all complete as per direction of the Engineer-in-charge ( the rate is inclusive of all materials and labours involved except scaffolding) |
| 76 | Racking out joints of stone masonry surface to the required width and depth, with due care and precaution by mechanical/manual means including preparing and cleaning the surface for re-pointing / refilling of joints, including disposal of rubbish to the dumping ground within 50 mtrs lead. |
| 77 | 9999.1098765 Chiseling the available devri stones incl. moulding of corners as per the directions of Engineer Incharge and all costs involved complete |
| 78 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) 13.42.1 Flush/Ruled Pointing |
| 79 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed7.44.1 Fine chisel dressed |
| 80 | Clearing of Jungle uprooting of vegetation,grass,bush wood,trees and saplings girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. |
| 81 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.9.1 In lime mortar |
| 82 | Labour Charges for fixing available stones at site in Lime Mortar 1:2 upto floor V including curing complete. |
| 83 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: |
| 84 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 85 | Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm |
| 86 | Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately |
| 87 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 88 | Renovating lawns including weeding, cheeling the grass, forking theground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid separately.) |
| 89 | Brick edging in full brick width and half brick depth including excavation,refilling and disposal of surplus earth lead upto 50 mtrs with common burnt clay non modular bricks |
| 90 | Supply and planting Flower seedlings Hybrid in polybags 6\\"x6\\" at site i/c all carriages etc |
| 91 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete (cost of sludge, manure or extra earth to be paid |
| 92 | Supply, and planting various plants and shrubs i/c digging 30cmx30cmx45cm pit , refilling, watering as per directions by EIC i/c all carriages all complete job Plant as per site requirement:DEODAR NEW |
| 93 | PAULOWNIA |
| 94 | WEEPING WILLOW |
| 95 | GULMOHAR |
| 96 | ALBEZIA LEBIC |
| 97 | LAGESTROMIA 1KM |
| 98 | HYDRANGEA 2KM |
| 99 | GINKO 1KM |
| 100 | Golden privet 3' ht and above |
| 101 | Box tree 1'-6\\" and above |
| 102 | Capress 3' or above |
| 103 | Miniature Rose |
| 104 | Ornamental Plum |
| 105 | Mapple Pine |
| 106 | Racking Out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the the dumping ground within 50 mtrs lead |
| 107 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) 13.42.2 Raised and cut pointing |
| 108 | Supply ,Installation ,Testing and Commissioning of Glomac Light fittings having provided and fitted with 50 Watts LED Lamps (as Gate Light) of standard make dully ISI marked ,to be fitted on Gate pillars with necessary cliffs /Clamps with nuts and bolts complete job |
| 109 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 110 | Removing/Disposal of steel gate by way of engagement of welder complete job (Only Removal of gate as a whole) 9999.3741155 |
| 111 | Supply installation testing and commissioning of Heritage architectural ornamental decorative cast iron pole as per specification/ drawing (enclosed) Dwarka make /Karara Mujasame or of Equivalent standard Make. having the following specifications:-The pole with brackets shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The pole height should be 3400mm. The decorative pole has ornamental base (Approx. overall dimension-height 655mm, bottom dia 360mm) shall have a provision of inbuilt junction box for fixing MCB’s or cutouts with detachable window cover. The main cylindrical shape part of this pole is starts heavy duty mild steel hollow round pipe of 114mm dia with decorative top nut for better look of cast iron .The pole shall be similar to the once shown in the drawing. |
| 112 | Fixing of Ornamental Gate by Steel work welded in bullt up sections/framed work, Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of paint using structural steel etc. as required including all carraiges. complete job as per directions of EIC.9999.2025397 |
| 113 | Providing and fixing sinage board / entrance board over main gate (Entrance) and made up of MS Sheet frame work and fixed in angle iron frame work of required flats / bars / angle / like incld priming coat and two coats of steel paint and writing of letters in Urdu representing the name of building / institute as directed by Engineer Incharge at site complete 9999.1143884 |
| 114 | ELECTRICAL ITEMS PUBLIC ADDRESSING SYSTEM Part-A |
| 115 | Supplying, installing, testing and commissioning of Remote Paging microphone with minimum 12 buttons and Busy/Hole Indication. The Microphone Should be suitable for Desktop mounting. Shall have below featuresConfigurable PPT paging mode and Normal Paging Mode.9 Level of Con gurable priority.Support 24V phantom Power Supply, System Capacity of 32 Unit Microphone.Signal transmission ensure distance up to 600 meters.Redundancy loop wiring for Microphone Supervision.Approved Make : Bosch/Heinrich/Aties |
| 116 | Supplying, installing, testing and commissioning of Horn SpeakersApproved Make : Bosch/Heinrich/Aties |
| 117 | Supplying, installing, testing and commissioning of 10W wall mount speakers with following features:-component 6.5\\", Complete metal grille and line matching transformer 100/70V line. Variable wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840), SPL@1m/1W=88dB, Peak SPL 96dB complete with necessary mounting hardware & accessories.Approved Make : Aties/ASL/Heinrich |
| 118 | Supply Installation Testing & Commissioning of 400W RMS Dual Channel Class-D Digital Power Amplifier with Switch power technology for power electricity saving. Amplifier shall have Following Features: 500W RMS per Channel, Amplifier Output 100V, Short Circuit, Power, Tempreature, Overload Protection, Auto Cooling Fans. THD <0.1%, Frequency Response 20Hz - 20kHz, AC & DC Fuse, SNR >80dB. Approved Make : Aties/ASL/Heinrich |
| 119 | Supply and laying of 1.5 sq.mm. multistrand PVC sheathed Two Core Twin Twisted Speaker Cable in existing conduit / floor channel as per specifications.Approved Make : Polycab/RR/Belden |
| 120 | Supply and laying of UTP CAT 6 data cable in existing conduit/pipe on surface/recess/concealed, with connectors, termination etc. required as per specificationsApproved Make : Polycab/RR/Belden |
| 121 | Supplying & Fixing of Rack - 24U / 600w / 600d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. complete in all respect.. Make: APW/Wellrack/Rittle/Heinrich |
| 122 | ELECTRICAL ITEMS Illumination/Facading SYSTEM Part-B |
| 123 | Supply/Installation/Testing and Commissioning of Round Flood Light Wattage : 100WOperating Voltage :240VAC ,50Z CCT : RGBW Beam angle : 25 Degree IP Rating : IP66 of Philips/Wipro/Ecolink/LT/Halonix Make.The job further includes replacement warranty of item (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 124 | Supply/Installation/Testing and Commissioning of U10 Controller DMX Controller of Philips/Wipro/Ecolink/LT/Halonix Make.The job further includes replacement warranty of item (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 125 | Supply/Installation/Testing and Commissioning of DMX 8 Port Spiliter of Philips/Wipro/Ecolink/LT/Halonix Make.The job further includes replacement warranty of item (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 126 | Supply/Installation/Testing and Commissioning of Belden DMX Data Cable DMX Signal Supply cable of Philips/Wipro/Ecolink/LT/Halonix Make.The job further includes replacement warranty of item (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 127 | Supply/Installation/Testing and Commissioning of Waterproof connector, for end waterproof processing of standard Make. |
| 128 | Supply/Laying/Testing and Commissioning of 1.5 Mtr. Cable with one Side XLR male Connector and second side XLR female Connector of Philips/Wipro/Ecolink/LT/Halonix Make.The job further includes replacement warranty of item (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 129 | Supply and Erection of 06 Mtr Galvanized Iron pole with galvanizing done in single dip. (Average coating. thickness Minimum 65 Microns) continuously tapered poles having Octagonal Sections designed to withstand the maximum wind speed as per Is 875, The pole shaft shall he made from shear steel (47 Steel Conforming to grade 536510) and Confirming to BS&N 1002, and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with tha rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing. (Utkarsh/Valmont/BPP/Surya/Equivalent Make. Also includes Supply/Fixing of 8 SWG G.I wire run over the cable length properly earthed with main earthing pit/grid (Standard make) |
| 130 | Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 1ʹ x1ʹ x 2ʹ)having 2.5ʹ U/G & 0.5ʹ A/G including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job) with Following Procedure & All as per pre approved by Engineer in charge:-A) Excavation of Pit for Foundation Size upto required depth from Ground levelB) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete.C) Providing and laying in position cement concrete of M-10 grade of 75 mm thicknessD) Reinforcement for R.C.C. work with MT bars including straightening, cutting, bending, placing in position and binding all complete.E) Centring and shuttering including strutting, propping etc. and removal of form work for Footing and PedestalF) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM Recommendations.G) Providing and Laying Reinforce cement Concrete of M-25 grade In footing and Pedestal including Curing the foundation for 7 days. |
| 131 | Supply/Fixing of Pole bracket on existing 06mtr pole for holding minimum 08 No. of lights |
| 132 | Design,Fabrication,Supply, Installation, Testing and Commissioning of CPRI Approved Main LT Control outdoor slopped Roof,Double Door panel Floor Mounted fabricated of 16 gauge sheet steel,the panel should have standing dust & vermin proof with gasket lockable door with angle iron stand of 2.5 feet height/ground clearance properly grouted in cement concrete of 1:2:4 ratio-filter . The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter,Phase-indicators etc with baby insulators/thimbles suitable for use at 230 Volts 50Hz system complete in all respects complete in all respects with following:-(1) Normal Incoming63 Amp DP MCCB of Legrand/Siemens/ ABB//LK make = 1No. 100 Amp PN Bus bar Al Strips = 1 SetDigital VoltMeter =1 no, Digital Ammeter = 1 no , CT coils for Ammeter 300 /5A = 1 set ,phase indicators =1setOutgoing(1)16 Amps MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 08 No.(2) Suitable Timer as per site requirement(3) Suitable Surge Protection Device as per site requirementThe Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to approved by Engineer Incharge before manufacturing |
| 133 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value. Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job. |
| 134 | Customised Al Profiles as Per site Conditions |
| 135 | Supply and Laying of PVC Prince Pipe/HDPE Pipe of 25/32 MM as per site requirement of Standard Make. |
| 136 | Supply,Installation,Testing & Commissioning of Buck-Boost type 50 KVA,3-Phase,415V,L.T,Unbalanced Servo voltage stabilizer that must take a load of 50 KVA at the Following Specifications: No. of Phases = 3 No. Input Voltage (L-L)= 207-460 Volts ,Output Voltage =415 volts ±1%(Phase to phase) & 230 volts±1%(Phase to neutral) Protection =Over voltage, under voltage & Overloading with TDR & Neutral failure protection .No. of Chambers = 3 No for each dimmer unit Buck-Boost. The Stabilizer shall be servo-controlled automatic ,ONAN cooled and provided with first filling of fresh filtered transformer oil having required dielectric strength .The Stabilizer shall be capable of smooth operation upto 10 % un-balanced in the load currents.The contractor /supplier has to give guarantee for any manufacturing defect with three servicing of the equipment for two year reckoned from commissioning.Inclusive of all applicapable taxes (Electrified /Automatic electric / Chinar / Alba / Casco make).The contractor has to faciltate testing of stabilizer at manufacturing site to departmental representative before despatching to site of work.The Job further includes CMC for a period of three years reckoned from date of sucessful commissioning (The comphrensive maintenance contract includes operation and maintenanace of stabilizer including replacement of damaged /burnt out accessories /equipments (what so ever reason) both mechanical as well as electrical completly by fresh one besides carrying timely servicing ) The complete inspection of Stabilizer shall be carried out by departmental representative not less than the rank of SDO at manufacturing site before assembling of stabilizer and contractor has to faciltate in all aspects the departmental representative uto manufacturing plant. |
| 137 | Supply/Laying/Testing and Commissioning of 3.5-Core 50 mm sq. Al armored XLPE Insulated,PVC cable Havells/Polycab/RR-Kabel/KEI/Paramount Make. Including Supply/Laying of HDPE Pipe of required size, ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc partially in ground or above ground including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping. |
| 138 | Supply/Laying/Testing and Commissioning of 4-Core 10 mm sq. Al armored XLPE Insulated,PVC cable Havells/Polycab/RR-Kabel/KEI/Paramount Make. Including Supply/Laying of HDPE Pipe of required size, ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc partially in ground or above ground including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping. |
| 139 | Supply/Laying/Testing and Commissioning of 4-Core 16 mm sq. Al armored XLPE Insulated,PVC cable Havells/Polycab/RR-Kabel/KEI/Paramount Make. Including Supply/Laying of HDPE Pipe of required size, ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc partially in ground or above ground including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping. |
| 140 | Design,Supply, Installation, Testing and Commissioning of Main LT Control Double Door panel Slopped Roof fabricated of 16 gauge sheet steel,the panel should have standing dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Multifunctional meter, R/Y/B Phase-indicators etc & angle iron stand painted in black colour of 2.5 feet height/ground clearance properly grouted in cement concrete of 1:2:4 ratio-filter with baby insulators/glands/thimbles suitable for use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects with following:-Incoming: 63 Amp-4 pole,25k-36kA MCCB with extended terminals Adjustable Thermal & Fixed Magnetic LK/ABB/Legrand/Simens Make =01 No & 100 Amp Suitable Al. Bus bar=01 SetOutgoing: 1) 32-40 Amp 4 pole TPN RCBO,30mA,C-Curve,10-15kA of ABB/LK/Legrand/Schneider/BCH/Equivalentas approved. =02 No.2) 163 Amp 4-Pole,415V Contactor = 01No. of ABB/LK/Legrand/Schneider/Equivalent make as approved. 3) Digital Astronimical Timer of GIC Make Specified as Below:* LCD Display with Green backlight * Precise time programming for Astro / Daily /Weekly / Pulse / Cyclic switching * Latitude / Longitude Database for 45 Countries and 280 cities * Settable Latitude / Longitude precise to the minute with time zone * Sunrise/Sunset or Twilight rise/set trigger modes * Ease of Day selection in Weekly programming * 50 ON/OFF programs, 10 Holiday Programs * Settable DST feature & Password protection * 16A Single and Dual relay outputs * Two Separate Relay outputs with independent Programming * 12/24 Hour Display Format * 6 Years Battery reserve * Simple Reset & Manual Override* Service/Load hours measurement Panel shall have provision for MCB’S/entry of cables from the bottom as required.(The Panel manufacturing unit should be CPRI Registered with latest ammended IEC / IS 61439 and the Contractor has to submit the test certificate of main switch gear's and Drawing's of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards ) & is to approved by Department not less than the rank of SDO before manufacturing of panel) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender