Tender For Raising Of First Floor Over Existing Ground Floor At Adh Office Building Baramulla
Tender Value
90.48 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
1.80 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Raising Of First Floor Over Existing Ground Floor At Adh Office Building Baramulla
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Correction | Other | 25-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Brick Work Common burnt clay F.P.S (Non Modular) Bricks of class designation 75 in superstructure above pinth level upto floor V Level in cement mortar 1:6 (1 cement: 6 coarse sand including all carriages /head load up to site of work complete |
| 2 | P/L in position cement concrete of specified grade R.C.C excluding cost of cantering and shuttering all work upto floor-V level in 1:1:5:3 (1 cement: 1:5 coarse sand: 3 graded stone agg 20 mm nominal size) using crushed agg including all carriages upto site of work complete |
| 3 | Steel reinforcement of RCC work incl. straightening, cutting, bending, placing in position and binding all complete twisted bars (TMT bars) incl all carriages complete |
| 4 | Centering and shuttering incl. strutting, propping etc and removal of form work in a) Slabs |
| 5 | b) Stairs |
| 6 | Providing and fixing of wood work in frames of 1st class imp kail wood of doors/windows/ventilators |
| 7 | P/F of paneled or paneled/glazed shutters incl beading etc for for windows (35MM) thick in 1st class Kail wood including cost of 3.5mm thick glass panes complete. |
| 8 | P/f of paneling & glazing in pannelled & glazed shutter doors, windows (35mm) thick in 1 class kaid wood |
| 9 | Providing and fixing of 35mm thick wire guaze shutters in 1st class Kailwood |
| 10 | P/f of iron hold fasts 40x5mm flat iron |
| 11 | P/F of AL T. Bolts a) (100x10mm) |
| 12 | a) (150x10mm) |
| 13 | Drop Providing and fixing of sliding door bots (300x16mm) L-Drop |
| 14 | P/f of Al handles ISI marked a) 125mm |
| 15 | b) 150mm |
| 16 | 15 mm thick cement plaster in 1:4 mix on walls |
| 17 | C. C. flooring in (1:2:4) mix 40mm thick with 20mm Nominal stone agg including all carriages. |
| 18 | P/A of wall puty of 2mm thickness over plastered on walls. |
| 19 | F/f of GS sheet roofing J or L hooks including a coat of Approved sheet primer two coats of approved paint (Green Colour) 0.50 mm thick(pre colour coated Hi-rib sheets) |
| 20 | Structural Steel work welded in built up section including cutting, bending, binding complete and applying prming ocat of steel primers |
| 21 | P/F of Pine wood panelling in Horizontal & Vertical directions including jamping with and budloo wood frame 2”X2” section and polishing (French Polish) complte |
| 22 | P/f of ceramic wall/glazed tiles of approved brand & manufacturing |
| 23 | Applying of priming coat with ready mined primer of approved brand & manufacturing on wood work. (hard & soft) |
| 24 | Painting with synthetic enamel paint of approved brand & manufacturing on wood work. Qty vide Item No. 29 |
| 25 | P/f of marble stone/ granite of approved brand over 20mm thick base of Cluster (124) mix including rubbing, polishing, complete job |
| 26 | P/F of sanitary fittings of standard quality incl. all carriage, complete job a) PVC Pipe 4\\" |
| 27 | b) PVC Pipe 3\\" |
| 28 | c) P-Band 4\\" |
| 29 | d) P-Band 3\\" |
| 30 | e) Door tee 4\\" |
| 31 | f) Door tee 3\\" |
| 32 | g) F- Trap |
| 33 | G.I Pipe a)15mm |
| 34 | b)25mm |
| 35 | P/T of C. P fittings. a) Angle valve |
| 36 | b) Bib Cock |
| 37 | c) C. P Connection |
| 38 | d) Sink mixer |
| 39 | e) Health Faucet |
| 40 | f) Soap case |
| 41 | g) Towel Rod |
| 42 | h) Geyser 50 Ltrs |
| 43 | i) Floor traps (anti cockroach) |
| 44 | j) Glass shalf |
| 45 | k) Looking mirror |
| 46 | l) Indian W. C |
| 47 | m) Wash basin Pedestal |
| 48 | P/L of pre cast c cone tiles 50mm thick of required shade & colour. |
| 49 | P/F of parquet flooring 12mm thick including c/o 6mmm thick foam |
| 50 | P/F of skirting |
| 51 | P/F of main holes |
| 52 | Earth filling by way of good earth including all carriage |
| 53 | P/F of ridges 0.50mm thick (pre-colour coated) |
| 54 | P/F of Vally(0.50mm thick (pre-colour coated) |
| 55 | Providing wood work in bed plates, trusses, posts etc. in 1st class Budloo wood for rough ceiling. |
| 56 | P/f of 20mm thick Budloo wooden planks for false ceiling |
| 57 | P/F of 50mm thick cornice of 1st class kail wood |
| 58 | P/L of Collapsible door shutter complete job. |
| 59 | Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp singe pole switch of approved quality in modular grid plate and Gi box and Earthing of fixtures and the outlet box with 1.5samm PVC insulated copper wire One light controlled by 6 Amp Switch |
| 60 | wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 212.5s0nmm PVC insulated copper wire in concealed or surfaced mounted PVC conduct including providing and fixing of 16amp 3 pin switched socket approved make with modular grid plate and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire completes as required |
| 61 | Wiring for ceiling fan wall fan point same as above in item No33 but controlled by electronic stepped regulator and 5amp control switch |
| 62 | Wiring for 230v ac 5- pin3x6 Amp socket out let for light duty power with 230v ac 6-amp SP switch on same modular grid plate with 25 sqmm PVC insulate copper wire of approved make and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire complete as required |
| 63 | Wiring for circuits for light fan/exhaust fans/AC, Wiring for circuits for light fan/exhaust fans/AC, etc. with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further (Without Conduits) a) 2x2.5 Sqmm =+ 1x1.5sqmm |
| 64 | b) 2x1.5 sqmm |
| 65 | Applying installation testing and Commissioning of pre wired industrial socket including 32-amp SP MCB complete with connection as required |
| 66 | Supplying and fixing of following size Dia PVC conduit including cost of junction boxes, bends,elbows, sockets, tees etc. laying in slab cutting chases and making good or surface mounted including all foxing hardware as required. a) 25mm Dia |
| 67 | b) 35mm dia |
| 68 | Supplying and laying of 2 pair telephone wire Havells make complete as required |
| 69 | Supplying and fixing of telephone socket complete with connection as required |
| 70 | Supplying installation testing and commissioning of pre wired 15 watt led light complete with Connection as required |
| 71 | Supplying installation testing and Commissioning of pre wired ceiling fan complete with connection as required |
| 72 | Supplying installation testing and Commissioning of exhaust fan completes with connection as required 200mm |
| 73 | Supplying and fixing following Way. Prewired TP&N PPI Distribution Board of Sheet Stool for 415 Volts on surface Recess complete with Ready to use DBs Provided with 100A insulated phase bus-bars, neutral baris With shroud/s, earth bars, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels. The D.B should be IK-09Compliant. (The Cost of D.B is without MCB's) (IP Rating-43 A 6 way (8 Module Incomer) 2+2+2 incomer DP RCCB) (4+4+4) Sp MCB'S O/G's) |
| 74 | Supplying and fixing of following size MCB's complete with connection as required make Schneider. a) 6-32-amp SP |
| 75 | b) 40 Amp DP |
| 76 | Design, fabrication, assembling, supply. installation, testing and commission of LT Sub main panel for healing (indoor type) suitable to 415V3 phase 4 wire power supply system pedestal and necessary wiring and other panel accessories comparing of the following:Incomersa) 200 Amp 4 pole 35KA MCCB (ABB)b) Spreaders links & phase barriersc) 100 Amp MCCB 02 No Alu Bas Bard) Digital multifunction metere) CT'S coilsf) Judication lampsOutgoingsa) 100 Amnp sp MCCB 25KA (ABB) spreader links and phase barriersb) 100 Amp changeover |
| 77 | Wiring for sub main circuits with following size PVC insulated 1100v Grade multi strand copper Conductor wire green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to distribution board from main penal board. (Without Conduits) A) 4x10 Sqmm2x6 Sqmm |
| 78 | B) 4x6+2x4 Sq mm |
| 79 | C) 2x6+1x2.5 Sq mm for AC circuit |
| 80 | Supplying laying of following 1100-volt grade XLPE insulated PVC sheeted aluminum conductor armored cable BS per specification in existing trenches cable trays ducts over bed of sand clamps including fixing bolts connecting testing and commissioning 50 sqmm 3.5 core |
| 81 | supply installation, testing and commission of chemical earthing complete as required |
| 82 | supply installation, testing and commission of llot and cold AC 1.5TR including transformer of approved make including stabilizer and allied accessories complete connection as required |
| 83 | Providing and fixing of kent lite mineral Ro water Purifier System (RO+UF+TDS) for essential mineral,8 litre storage tank inbuilt, with optional item pre filter bowl set for safety and extra sedimentation with one extra span candle and including fittings complete job. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender