Tender For Periodical Services To Certain Buildings In Sector 28,29,30 & Rcma Bldg (3Brd) At Chandigarh
Tender Value
10 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Certain Buildings In Sector 28,29,30 & Rcma Bldg (3Brd) At Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster/ loose tiles in small patches as per site requirement in any situation / locatioon on brick or stone walls, RCC surfaces such as walls, ceiling, chajjas, beams, columns etc, (internally or externally) including raking out joints, hacking for key, scrubbing down with water, etc and rendering 15 mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and treating the surfaces with existing finishes to match with existing up to (G+3) floor buildings complete all as specified and directed.Note:- cost of scaffolding and all safety measures shall deemed to be included in the unit rate qouted. |
| 2 | Preparation of old brick or concrete/kerb stone surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint over one coat of primer all as specified in clause 17.3,17.4,17.5 & 17.9 &17.10 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 3 | Material and labour for writing letters or figures (block, roman, italic or indian) n exc 30 cm height with synthetic enamel paint to match existing work c (Height max 12 mtr all as specified in clause 17.10 & 17.14 of SSR Part-I complete all as specified and directed. |
| 4 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified in clause 17.3,17.4,17.5 & 17.8 &17.10 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 5 | Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint all as specified in clause 17.3,17.4,17.5 & 17.6 &17.10 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 6 | Preparation of old treated wall surfaces by scraping, washing, rubbing down and stopping of distempered/ painted surfaces and applying one coat of oil emulsion distemper (OBD) on wall surfaces with roller and brushes all as specified in clause 15.10 & 15.14 of SSR Part-I and clause 15.2 of SSR Part -II complete all as specified and directed. |
| 7 | Preparation of old treated wall surfaces by scraping,washing, rubbing down and stopping of distempered /painted surfaces and applying two coats of oil emulsion distemper (OBD) on wall surfaces with roller and brushes all as specified in clause 15.10 & 15.14 of SSR Part-I and clause 15.2 of SSR Part -II complete all as specified and directed. |
| 8 | Preparation of old treated wall surfaces by scraping,washing , rubbing down and stoping of distempered / painted Surface of any description over 10cm girth or width, applying wall care putty 2 mm thick (average thickness) of approved quality as specified in clause 15.19 of SSR Part-I and one coat of primer , finally applying two coats of oil emulsion distemper (OBD) with roller and brushes all as specified in clause 15.10 & 15.14 of SSR Part-I and clause 15.2 of SSR Part -II complete all as specified and directed. |
| 9 | Preparation of old treated ceiling surfaces by washing, rubbing down and stopping of distempered / painted surfaces and applying one coat of oil emulsion distemper (OBD) on ceiling surfaces all as specified in clause 15.10 & 15.14 of SSR Part-I and clause 15.2 of SSR Part -II complete all as specified and directed. |
| 10 | Preparation of old treated ceiling surfaces by washing , rubbing down and stoping of distempered and painted Surface of any description over 10cm girth or width, not otherwise described and applying one coat of plastic / interior emulsion paint with roller and brushes all as specified in clause 17.3,17.4,17.5 and 17.6 and 17.16 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 11 | Preparation of old treated wall surfaces by washing , rubbing down and stoping of distempered and painted Surface of any description over 10cm girth or width, not otherwise described and applying one coat of plastic / interior emulsion paint with roller and brushes all as specified in clause 17.3,17.4,17.5 and 17.6 and 17.16 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 12 | Preparation of old treated wall surfaces by washing , rubbing down and stoping of distempered and painted Surface of any description over 10cm girth or width, applying wall care putty 2 mm thick (average thickness) of approved quality as specified in clause 15.19 of SSR Part-I and one coat of primer , finally applying two coats of plastic / interior emulsion paint with roller and brushes all as specified in 17.3,17.4,17.5 & 17.6 &17.16 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. |
| 13 | Preparation of old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of weather proof acrylic emulsion paints, exterrior grade (100% acrylic) on surfaces of walls in multistoried buildings three to five floors with and including requisite scaffolding and all necessary safety precuations and jhula arrangement all as specified in 17.3,17.4,17.5 & 17.6 & 17.17 of SSR Part-I and clause 17.2 of SSR Part -II complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender