Tender For Pdna Works Under Lwss Nalsuha Bharoon Pragpur In Tehsil Pragpur Distt. Kangra (Hp ) (Sh:- Construction of Pump House Cum Attendent Quarter At Headworks & Supply And Errection Of Pumping Machinery )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2026
1 days left
EMD
69270
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Pdna Works Under Lwss Nalsuha Bharoon Pragpur In Tehsil Pragpur Distt. Kangra (Hp ) (Sh:- Construction of Pump House Cum Attendent Quarter At Headworks & Supply And Errection Of Pumping Machinery )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in all kinds of soil such as pick work, jumper work, blasting hard or soft rock, by chieselling where the blasting work is water with in all heights stacking the excavated soil with in all leads clear from the edge of excavation and then returning the stacked soil in 15 cms. layers when required in to plinths, sides of foundations consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the direction of Engineer-in-charge with in all leads and lifts complete in all respect. |
| 2 | Providing and laying cement concrete 1:6:12 (1 cement, 6 sand, 12 graded stone aggregate 40 mm nominal size )and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts complete in all respect. |
| 3 | Random rubble masonary/Polygonal rubble masonary (un-coursed/brought to courses) with hard stone of approved quality I/c levelling up at P.L. with cement conc. 1:6:12 in cement mortar 1:6 (1cement, 6 sand) in foundation and plinth.) with in all leads and lifts complete in all respect. |
| 4 | Brick work using common burnt clay building bricks in superstructure above G.L. to 1st floor level in cement mortar 1:6 (1Cement, 6 Sand) of 2nd class bricks complete in all respect with in all leads and lifts. |
| 5 | Providing and fixing presed steel door frames manufactured from commercial mild steel of 1.25 mm thickness I/chinges fans lag joints bend and if required threshhold of mild steel angle etc. (a) Profile \\"A\\" with in all leads and liftscomplete in all respect. |
| 6 | Providing and fixing glazed and pannelled, glazed or pannelled shutters for doors, windows & clerestory windows I/c bright finished/ black enamelled iron butt hinges with necessary screws.(a) 40 mm thick 2nd class deodar wood with in all leads and liftscomplete in all respect. |
| 7 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4.00 mtr and removal of the same for in situreinforced and plain concrete work in:- a) Foundation, footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. |
| 8 | Flat surfaces such as soffits of suspended floors, roofs, landing and the like floor etc. up to 20 mm in thickness including all leads and lifts complete in all respect. |
| 9 | Sides and soffits of beam, beam haunching, cantilever and bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor complete in all respect with in all leads and lifts. |
| 10 | Providing and laying cement concrete 1:2:4 (1cement, 2 sand, 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for RCC work in :- a) Foundation, footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. |
| 11 | Suspended floors, roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantilever up to floor-2 level with in all leads and lifts complete in all respect. |
| 12 | Providing tor steel reinforcement for RCC work including bending binding and placing in position with in all leads and lifts complete in all respect. |
| 13 | Half brick work using common burnt clay building bricks in superstructure above 1st floor level in cement mortar 1:4( 1Cement, 4 Sand) of 2nd class bricks complete in all respect with in all leads and lifts. |
| 14 | Pointing on brick work with cement mortar 1:4 (1 cement, 4 sand) with in all leads and lifts complete in all respect. |
| 15 | Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:4 (1 cement, 4sand) over a 12 mm layer of C.M 1:3 (1 cement, 3 sand) and finished neat with in all leads and lifts complete in all respect. |
| 16 | 6 mm thick cement plaster to ceiling in C.M.1:3 (1Cement,3 sand) with in all leads and lifts complete in all respect. |
| 17 | 15 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 (1 cement, 6 sand) as per the direction of Engineer-in-charge with in all leads and lifts complete in all respect. |
| 18 | 20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 (1 cement, 6 sand) as per the direction of Engineer-in-charge with in all leads and lifts complete in all respect |
| 19 | Providing and fixing MS grills of required pattern in wooden frames of window etc with M.S flat square or round bars with round headed bolts and nuts or by screw with In all leads and lifts complete in all respect. |
| 20 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.G with wire of dia 0.56 mm for doors, windows l/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect. |
| 21 | Boulder filling behind retaining wall under floor with in all leads and lifts complete in all respect. |
| 22 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement, 3 sand, 6 graded stone aggregate 20 mm nominal size) with in all leads and lifts complete in all respect. |
| 23 | Constructing coursed rubble hammer dressed \\"U\\" shape open surface drain with side wall 15 X 22 cm in cementy mortar 1:6 (1 cement, 6 sand) and inside plastering with cement mortar 1:3 (1 cement, 3 sand) i/c earth work and laying 10 cms cement concrete in 1:5;10 (1 cement, 5 sand, 10 graded stone aggregate 40 mm nominal size) and 7.5 cms cement concrete 1:2:4 (1 cement, 2 sand,4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts complete in all respect. |
| 24 | Providing 40X3 mm flat iron hold fast 40 cms long including fixing to frame with 10 mm diameter bolts nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm. 1:3:6 (1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size complete in all respect with all leads and lifts. |
| 25 | Providing and fixing M.S.fan clamp type 1 of 16 mm dia M.S bar bent to shape with hooked ends in RCC slab during laying Including painting the exposed portion of loop as per standard design complete in all respect. |
| 26 | White washing with lime on un-decorated wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all, dirt, dust, mortar and other foreign matters with in all leads and lifts complete in all respect. |
| 27 | Distempering with dry distemper of approved brand and manufacturer (Two Coats) and of required shade on un-decorated wall surfaces to give an even shade over and Including priming coat of whiting after throughly brushing the surface free from mortar and other foreign matters with in all leads and lifts complete in all respect. |
| 28 | Finishing wall with water proofing cement paint of approved brand and manufacture (Two coats) brushing to give an even shade I/c cleaning of oil, dirt, dust and other foreign matters,sand papering and knotting etc.with in all leads and lifts complete in all respect. |
| 29 | Providing and fixing anodised aluminium sliding door bolts anodised colour and shade with nuts and screws complete in all respect. (300X16) |
| 30 | Providing and fixing aluminium tower bolts (Barrel type) anodised transparent or died to required shade with necessary screws complete in all respect. (250x10) |
| 31 | Providing and fixing aluminium handles anodised, transparent or died to required shade with necessary screws complete in all respect. (100 mm) |
| 32 | Painting two coats excluding priming coat on new steel and other metal surfaces with ready mixed paint and brushing to give an even shade including cleaning of all dirt, dust and other foreign matter with in all leads and lifts complete in all respect. |
| 33 | Terrazzo tile flooring with precast terrazzo tiles 20 mm thick with marble chips of specified size lald in floors, treads of steps and landing on a bed of 25 mm average thickness of cemenrt mortar 1:6 (1 cement, 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tile where ever required Including rubbing and polishing complete with tiles of following shades medium with in all leads and lifts complete in all respect. |
| 34 | Pumping Machinery Raw Water submersible KRTE pump set with allied accessories. Providing & supplying of raw water Submersible KRTE pump set capable of handling high thread turbidity of KSB make model single and open impeller raw water handling pump confirming to latest BIS code.The pump shall be fitted with single vane impeller of suitable alloy for handling raw water as per IS 5669-1970 having oil/grease packed bearings and stainloss steel shaft, wound stator on motor side with shaft protection sleeves on pump side ensuring better life for shaft The impeller of pump shall bo directly mounted on extended submersible square cage motor shaft conforming to BIS-9238-1979 with upto date ammendments of 2900 RPM, totally dust & weather proof with detach able pump casing for easy inspection with double mechanical seal grease/oil lubricated and provided wilth stainleso steel thrustbearing plate to withstand vertical load with minimum wear & toar .lt should be fitted with device to take up expension of water on heating of motor & suitable for operation on 415-7-10% volts 3 phase 50 CIS AC supply.The power of motor should bo at loast 10% in oxcens of maximum power required by the pump in complete operating range with mounting stand/duck foot bend .steel guide wire wilth mounting hook lowering chain and standard accessories as supplied by the manufacturers complete and suitable for fulfilling the the following requirement:- i) Discharge =( Q) 29.91 LPS ii.) Total Head =( H) 33.61 Mts. a) SWL = 472.10 Mtr. bgl. c) R.L. point of discharge = 499.50 Mtr. d) Seasonal fluctuation + draught condition + bowl assembly. 3.00 Mtrs. e) Drawdown 2 Mtrs. f) R.L of lowest point of pumpset installation =472.10.00 Mtrs. g) Static Column lift = 18.50 Mtrs. iii) Rising main. Column Pipe. Length 60Mtrs. Length=3 mtr Dia meter. 150 mm Dia 100mm Class GMS ( M) Class GMS. (M) iv) Pumping hours = 8 hours v) Altitude of installations above M.S.L. __________Mtr. vi) Characteristic of water. a) Temperature _______ Deg Cel. b) Turbidity ________JTU. c) Allkanity. ___________mg/ l Ca Co3 d) Size of solids ____________mm e) others vii) Depth of P/well = 12 Mtr. viii) Depth of P/well assembly 12m ix) Length of assembly pipe. meter x) Dia of housing pipe 100 mm xi) Length of housing pipe. meter OPERATING CONDITIONS. I) Type of Current :- A.C.Three Phase. ii) Frequency:- 50 Cycles /Sec. iii) Rated Voltage 415 +/- 15 % Volts. iv) System of earthing: Double Loop earthing as per BIS 3843-1987 Latest. v) Speed of Revolution ____________ RPM 2900 MOTOR. i) Ref. to BIS code BIS 9283-1979 with upto date amendments. ii) Type of enclosure of motor: As per BIS ; 4691-1985 ( latest ) iii) Mechanical out put in H.P. iv) Class of insulation :Class B The motor should be able to withstand initial current of 2.50 times the rated current for two minutes without suffering damages of permanent deformations. PUMP i) Ref. to BIS code ; BIS ; 5659-1978 with upto date amendments. ii) Drive Type: Electric driven. iii) Operating Range: -15 % to+10 % of Total head at duty point. iv) Deliver size of Pump : ________( To be quoted by tenderer.) |
| 35 | Providing ICTP Main Switch with HRC fuses of L&T/ Havells/ Standard / Kilburn / Siemens make and having capacity 30% extra of the operational rating as per IS : 13947-P I & II with upto date amendments. |
| 36 | Providing MS Sheet steel fabricated floor mounted closed ( Almirah type ) switch board including angle iron post of suitable height and size ISA 40x40x6 mm duly painted with sheet of 16 gauge comprising and capable of mounting the following accessories with all internal connections. |
| 37 | OCB of kilburn / L&T / Havells / Standard make of suitable capacity on incoming feeder with or without intial oil filling as the case may be with neutral linked under voltage releases as per IS ; 2516-1985 with upto date amendments. |
| 38 | ELR of recommended make L&T / Havells / Standard as per IS ;2516-1985 with up to date ammendments and of suitable range which should have control box , operating handle & trip / reset bush button on / off of indicators, reindicating off spring condition of the circuit breaker for over current protection. The circuit should be equiped with magnet thermal release with metallic tape CTS. It should also be fitted with earth fault for tripping of breaker on occurence of Earth fault. |
| 39 | The voltage monitor Relay 3 phase with all protection and usual indicator and electric siren against single phasing, low voltage, high voltage, reverse phasing, overloading and phase voltage difference as per IS; 3842 ( Latest Edition ) |
| 40 | A.C. supply, voltmeter of recommended make IMP / Havells / A.E / L&T of suitable range with selector switches as per IS ;1248-1983 with latest amendments. |
| 41 | AC supply ammeter of IMP/ Havells / A.E/ L&T make of suitable range with selector switches and CIS operated as per IS :1248 ( P-I&II ) -1983 with upto date amendments.. |
| 42 | Bus bar chamber having three bars of suitable rating for full length equal to the width of the board for three line phases and suitable for induced current, one copper bar of half the rating of full length for neutral phase as per IS ; 8084-1976 and IS :11353-1985 read with BIS ; 5578 -1985 with upto date amendments including. Three phase indicator lamps complete with toggle switches for individual motors as per IS 3452 ( P- I&II) with upto date amendments. |
| 43 | Capacitor of BHEL / GEC / L&T /Mecheil make as per IS ; 2834-1968 with upto date amendments, to raise the power factor at site to 0.95 for direct connections to induction motor individually of required KVA rating according to H.P. offered including cables as per relevent ISI code ( of Seimens / Glocter / IEC make ) from bus bar chamber to capacitor as per IS : 4064-1978 with upto date amendments . Rating of capacitor will be approved by HPSEB. |
| 44 | Providing suitable oil immersed ''Star Delta Starter of L&T/ Havell,s/ IMP/ BHEL / MEI / Kilburn make as per IS : 13947-II with upto date 'amendments for Squirrel cage / Slipring motor mounted on panel board with magnetic 'type overload release and dashpot, time lag, under voltage release, with or without 'initial oil filling as the case may be with single Phase preventor as per IS ;1248 ( P-V ) 1983 with up to date amendments. |
| 45 | Providing double flanged Cast Iron Sliuce valve of Leader / Kirloskar make for the delivery line of pump and capable of withstanding the normal seat pressure and as per IS 780-1992(Cast iron) with latest ammendments PN 1.60 For Column Pipe 125 mm dia |
| 46 | Providing double flanged swing type cast iron Reflux valve of Kirloskar / Leader make having Bye pass arrangement on the delivery line of the of the Pump and capable of withstanding normal Seat Pressure as per IS :5312-1984 (P-I) (Cast Iron) with latest ammendments PN 1.60 for R/main. 100 mm dia. |
| 47 | Providing pressure gauge of Prega / Precision / Fiebig make complete with all accessories such as stop cock, copper tubing as per IS ; 3624-1987 with upto date amendements |
| 48 | Supply of PVC jointless,flat water proof cable as per BIS 694-1998 latest with upto date ammendments suitable for the pumpsets offered from MCB to motor including all other electrical equipments / accessories such as thimble, flexible pipe, solder, nuts and bolts, cable glands, clips etc, laid in pipes or trenches under floor.The type, size and make shall be subject to approval of HPSEB authorities. Cable size 10 mm2 |
| 49 | Providing & Lowering GMS Column pipe for assembly 100 mm dia including providing and fixing of MS flanges' of Table 17 as per IS : 6392-1971 with upto date amendments, rubber / asbestos gasket of min.3 mm thickness as per IS 2712-1979 and required numbers of nuts and bolts as per IS ;1364-1983 .The Column pipe shall be as per relevent IS Code and to withstand 1.50 times total head stipulated under item No. 5 . The Column pipe should be extended upto 5 mtr. beyond the outer wall of the pump house in the direction of Rising main . The Column pipe should be properly jointed with the Rising main including all necessary accessories like increaser / reducer, flanges, bends etc, including supporting clamps (2Nos.) at the top of T/well assembly, and as per the direction of Engineer - in - Charge. |
| 50 | Installation of all items appearing at Sr.No 5 to 13 as per the systematic drawing attached with the documents or as per the direction of Engineer - in- charge. |
| 51 | Providing and laying copper PVC insulated armoured power cable (one cable carrying all the three phases) of suitablle size and capacity to motors and all other electrical equipments as per IS ;1554 (P-I) 1988 or latest with upto date amendments of Seimen /Gloster / IEC / ICC / EICO / National / Grandlay make including all othe accessories such as thimble, flexible pipes, solder nuts and bolts,cable glands etc.laid in pipes of trenches under floor. |
| 52 | Providing and fixing double loop earthing with G.I. Flat 32x 6mm thick electrode complete with material such as thimble, nuts and bolts, charcoal, salt, 25x5mm strip as per IS ; 3043-1987 with upto date amendments for motors and other electrical equipments and digging of pits etc. complete in all respect as per the dirction of the Engineer - in - Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender