Tender For External Painting Of 6900 Kl Ms-Lbt-01 And Water Sprinkler And Foam Pipe Network Of Lbt 01& 02 And special repair Tank And Associated Piping Network At Nrpl Bijwasan
Tender Value
24.48 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Painting Of 6900 Kl Ms-Lbt-01 And Water Sprinkler And Foam Pipe Network Of Lbt 01& 02 And special repair Tank And Associated Piping Network At Nrpl Bijwasan
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Commercial Corrigendum | Financial Bid | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | External Painting of LBT-01 and associat |
| 2 | Tank Surface Preparation and Painting works: |
| 3 | Supply and application of paint on tank external surfaces, sprinklerline, foam line, etc. (all the areas mentioned above for surfacepreparation are considered in this line item). scope of work of the contractor includes supply of paint,tools & tackles,labours ,allequipments etc. Painting system shall be as follows: FIRST COAT: surface tolerant epoxy primer (greater than 80% solid by vol.) minimum125 micron per coat x 2 coats 2nd coat: acrylic isocyanate aliphatic Polyurethane coat (50% min. solid by vol.) with coat 50 microns DFT (min) byspray application (Gloss retention minimum 80 % under 1000 hours of QUVA. Colour will be as per Site. |
| 4 | Surface preparation of Roof & Shell Area includes complete roof, windgirder with handrails/supports, shell, primary wind girder and 2.0 m from top of shell inside, sprinkler rings, Tank shell, secondary windgirder, shell nozzles, etc. The scope of work of the contractor includessupply of paint, tools & tackcles,laburs, all equipments etc. Surface preparation using using hand tool cleaning including removal of oil, grease and other contaminants by solvent cleaning followed by removal of defective paint, loose mill scale, loose rust, loose paint, weld flux,slag from the metallic surfaces, by hand chipping, hand brushing, handscrappers/chisels, steel wools, final cleaning with High pressure (10000 PSI ) low TDS fresh soft water jet cleaning including water supplyand drying with compressed air as per the specifications and directionsof Site Engineer. Prepared surface shall conform to WJ-4 as per NACE no.5/SSPC SP-12 standards. |
| 5 | Letter Writing |
| 6 | Reflective radium sticker letter printing and apply in background stickering including pasting and fixing with supply of all manpower, equipments, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instruction of EIC/ Site Engineer to complete work in all respects |
| 7 | Reflective radium sticker printing (background sticker) and apply including pasting and fixing with supply of all manpower, equipments, tools, tackles, consumables, non-consumables, scaffolding (separate SOR item) working at any height etc. as per instruction of EIC/ Site Engineer to complete work in all respects. |
| 8 | Lettering with black Japan paint of approved brand and manufacture. [Note: Unit \\"EA\\" shall mean \\"PER LETTER PER CM HEIGHT\\"]. |
| 9 | Double scaffolding system |
| 10 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] |
| 11 | Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100 gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/ tying with building/ scaffolding pipes or with any other fixtures etc. complete as per directions of the Engineer-in-Charge. [Note: One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the Contractor on completion of the work]. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender