Tender For Repair /Maintenance And Servicing Of Stp, Mechanical Laundry Palnt At Mh And Rimc, Fire Fighting Equipments, Lifts, Ro Plants And Other Connected Items Under Age E/M-Ii Of Ge Dehradun
Tender Value
40 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maintenance And Servicing Of Stp, Mechanical Laundry Palnt At Mh And Rimc, Fire Fighting Equipments, Lifts, Ro Plants And Other Connected Items Under Age E/M-Ii Of Ge Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking out the exhausted activated carbon and fill up the same with live catalyst AgNO3 of IV value not less than 750 with supporting under bed Media (duty costed with Manganese di-oxide) as required and removal of the existing exhausted media complete all as specified and directed. |
| 2 | Supply, install, testing and commissioning Magnetic brake coil for VTM-30 brake for lift No 3,4,7 & 5 as per site requirement complete all as specified and directed. |
| 3 | Supply and filling common Salt Packet of 1 Kg for day to day use in Boiler plant complete all as specified and directed. |
| 4 | Supply & filling bacteria culture in PVC shells suitable for MBBR type plant complete all as specified and directed. |
| 5 | Supply and filling Molasses (Sheera) for day to day use in Sewage treatment plant complete all as specified and directed. |
| 6 | Supply and filling poly aluminium chloride chemical for day to day use in Sewage treatment plant complete all as specified and directed. |
| 7 | Supply and filling DAP for day to day use in Sewage treatment plant complete all as specified and directed. |
| 8 | Supply and filling granular based Calcium hypo Chloride water disinfectant packed in 45 Kg plastic drums (having 90% free chlorine) for day to day use in Sewage treatment plant complete all as specified and directed. |
| 9 | S&F Steam Rubber pipe 6mm of (0-10Kg) pressure 3 mtr long nylon embeded of iron machine ISI marked complete all as specified and as directed. |
| 10 | S&F in replacement steam solonoid valve 15mm cap of steam brass body ISI mark at Max 185 degree celcius and working at min operating pressure at 0.5 Kg/cm2 - max operating pressure at 15 kg/cm2 as per design complete all as specified and as directed. |
| 11 | S&F in replacement steam solonoid valve 20 mm cap of steam brass body ISI mark at Max 185 degree celcius and working at min operating pressure at 0.5 Kg/cm2 - max operating pressure at 15 kg/cm2 as per design complete all as specified and as directed. |
| 12 | Supply, fixing, testing & commissioning in replacement of bronze globe steam stop valve flanged of following sizes (IBR certified): |
| 13 | (a) 25 mm bore |
| 14 | (b) 40 mm bore |
| 15 | S&F in replacement steam flexible steel threaded pipe of 15-20mm dia and 1 mtr long complete all as specified and directed. |
| 16 | Supply, fixing, testing & Commissioning in replacement of Steam Brass strainer of flanged type Capacity 15 mm to 25mm of (IBR certified) suitable to fixing at site all as specified and directed. |
| 17 | S&F in replacement of MCCB 4 Pole 63A, breaking capacity 16 KA suitable for isolation, adjustable thermal & adjustable magnetic setting Ics=100% Icu complete complete all as specified and directed |
| 18 | S&F in replacement of MCCB 4 Pole 100A, breaking capacity 16 KA suitable for isolation, adjustable thermal & adjustable magnetic setting Ics=100% Icu complete complete all as specified and directed |
| 19 | S&F in replacement of MCCB 4 Pole 200A, breaking cap 25 KA suitable for isolation, adjustable thermal & adjustable magnetic setting Ics=100% Icu complete complete all as specified and directed |
| 20 | S&F in replacement heating element of iron machine single phase 900W 230 Volt ISI Mark as per OEM design complete all as specified and as directed. |
| 21 | S&F in replacement heating element \\"U\\" shape for iron table Single phase machine single phase 3.0 KW 230 Volt ISI Mark as per OEM design complete all as specified and as directed. |
| 22 | S&F in replacement heating element of steam vessel three phase 9.0 KW cap ISI Mark as per OEM design complete all as specified and as directed. |
| 23 | S&F Teflon Pad of Iron Machine of 1200mm x 750mm size as per OEM design complete all as specified and as directed. |
| 24 | S&F in repair PLC for drying tumbler as per existing complete all as specified and directed |
| 25 | S&F in repair PLC for washing machine as per existing complete all as specified and directed |
| 26 | Taking down boiler 600 Kg with the help of chain Pulley and removing of blockage of steam generator main coil any type and reflexing the same its original position after cleaning complete all as specified and directed. Note :- The rates of T&P required for taking down of Hydro ectractor are deemed to be included in the qoted rate for this item. |
| 27 | S&F burner Assembly for boiler 600 KG complete all as specified and directed. |
| 28 | M&L for periodical maint of drying beds by dislodging of filter media scrapping out the media mixed with sludge to a depth 25mm to 32 mm removing all floating material, cleaning well from inside, taking out sludge and algae and disposal off to a distance not less than 50 Mtrs incl digging out filter media upto 150mm depth for improving the porosity, leveling the media uniformly in filter bed complete all as specified and directed |
| 29 | S&F in repair PLC for Hydro extractor as per existing complete all as specified and directed. |
| 30 | M&L for taking down electric Induction Motor from Axial/base frame and shifting to workshop for rewinding, dismantling and taking out rotor Assembly from stator crefully and cutting/Cleaning burnt wire from stator, repair to damage slots including rewinding with super enamelled copper wire of suitable size, varnishing, drying and tapping with cotton tapes, replacement of ball bearings, reassembling, reinstalling at site including testing at full load for 15 HP motor complete all as specified and directed. |
| 31 | M&L for taking down electric Induction Motor from Axial/base frame and shifting to workshop for rewinding, dismantling and taking out rotor Assembly from stator crefully and cutting/Cleaning burnt wire from stator, repair to damage slots including rewinding with super enamelled copper wire of suitable size, varnishing, drying and tapping with cotton tapes, replacement of ball bearings, reassembling, reinstalling at site including testing at full load for 7.5 to 10 HP motor complete all as specified and directed |
| 32 | S&F Brake shoe liner Assembly for induction motor 7.5 HP to 15 HP complete all as specified and directed. |
| 33 | M&L for Preventive and periodical maintenance of micro processor based controlled VVV frequency drive, electric driven lift with ARD following capacity incl examining, adjusting, lubricating, greasing and replacement of unserviceable parts like gear box oil, hooter, fire switches, indication, emergency light, low voltage relay complete all as directed by Engr-in-charge:-(a) 26 passenger - 3 Nos with serving basement, ground plus 3 floors.(b) 15 passenger- 02 Nos with serving basement, ground plus 3 floors.(c) 08 passenger- 02 Nos with serving ground plus 3 floors. |
| 34 | Note: (i) Any major item required for maintenance or repair of the lift shall be measured & paid separately under relevant items of the schedule. Make and model of parts to be replaced shall be same as existing at site or as per OEM recommendation. (ii) Preventive maintenance, repair and replacement of spare parts shall be carried out only by OEM or their accredited/ authorised agencies under strict supervision of well experienced and qualified staff.(ii) The make of spares shall be shown as suitable for the existing system and shall be provided by authorized manufacturer's.(iii) Contractor will periodically (monthly) examine safety devices and governor of the equipment to ensure user safety. (iv) The rates deemed to be included for all items which are not considered in schedule but the same is essential for smooth & efficient functioning of the lift costing less then Rs 500/- i.e. fuse, thimbles, connectors, insulation tapes etc.(v) The contractor shall keep all spares reqd for routine maintenance and attend the defects immediately. In case of major defect, it shall be attended within 24 hrs failing which penal recovery @ 5000/- per day will be charged. The decision of GE will be final & binding.Note :- The fixing charges of items included in Sch 'A' for replacing unserviceable items are not included in the AMC charges. |
| 35 | Dismantling/taking down old unserviceable landing door and supply, fixing, testing and commissioning of new landing door SS hairline finish metal sheet (18 Gauge approx) SS 304 and scratch resistant as per existing size and model including door hander roller and landing sill for smooth opening of landing door suitable for 26 passanger cum stretcher lift with gate lock, door shoe and other fittings as per site requirement complete all as specified and directed by Engr-in-Charge. (Make: As per OEM recommendation) B+G+3Note: (i) Rate quoted by contractor are deemed to be inclusive of minor sparessuch as gate lock, door roller, door shoe, door rope etc and any other civil workrequired at site for taking down old door assembly and fixing new one and making good disturbed surfaces complete as per direction.(ii) Any damage done by contractor shall be replaced with same make and modelof the door sensor while taking down and rectify the same free of cost by contractor. |
| 36 | Supply, fixing, testing and commissioning full landing Door Frame JAMB 1200 Opening after taking out old unserviceable one complete alonwith all connected acccessories completely suitable for 26 passengers which is serving G+3 & B+G+3 complete all as directed by Engr-in-charge. |
| 37 | Supply, fixing, testing and commissioning full landing Door Frame JAMB 800 Centre Opening after taking out old unserviceable one complete alonwith all connected acccessories completely suitable for 08/15/26 passengers which is serving B+G+3 complete all as directed by Engr-in-charge. |
| 38 | M&L for aluminium chequered plate flooring Minimum 4 mm thick five bar pattern fixing with acssesories including necessary cutting bending, edeging, chamfering etc inside the car cabin of 08/16/26 passenger lifts etc complete all as specified and directed. Note :- Aluminium sheet should be cut in one piece for complete cabin ie. aluminium sheet should be jointless in complete cabin. |
| 39 | M&L for removal of dust, stains, marks, scratches on the stainless steel surface of car cabin including ceiling and carry out the scrubbing, polishing & buffing of stainless steel surface with help of stainless steel polish liquid and buffing tool to give the glossy and clean finish to lift cabins surfaces of 08/15/26 passenger lift complete all as specified and as directed. |
| 40 | S&F full length IR door Sensor 12V/0.2A with 20 number of diodes, pattern of 96 criscross beams meeting the requirements of EN 81-20 with IP 65 rating and housed in slim aluminium profile suitable for 08/13/16 passenger lifts including taking down old unserviceable one complete all as specified and as directed. ( Make- As per OEM Recommendation) |
| 41 | Supply, installing, commissioning and testing of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD520*4*10 mm bore size 90 mm ,key size 20*7 Bore length -150 mm, width size 115 mm with main hoist rope of size 10mm dia heavy duty suitable for 08 passenger lift serving B+G+3 landings as per site requirement welding/brazing etc including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed. ( Make- As per OEM Recommendation) |
| 42 | Supply, installing, commissioning and testing of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD720*4*13 mm bore size 90 mm ,key size 20*7 Bore length -150 mm, width size 115 mm with main hoist rope of size 13 mm dia heavy duty suitable for 13 passenger lift serving G+3 landings as per site requirement welding/brazing etc including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed. ( Make- As per OEMRecommendation) |
| 43 | Supply, installing, commissioning and testing of defective Sheave C.I/Casting Traction Sheave 4 Grooves pully code OD720*4*13 mm bore size 90 mm ,key size 20*7 Bore length -150 mm, width size 115 mm with main hoist rope of size 13 mm dia heavy duty suitable for 26 passenger lift serving G+3 landings as per site requirement welding/brazing etc including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed. ( Make- As per OEM Recommendation) |
| 44 | Supply, installing, commissioning and testing of defective deflector/diverter Sheave C.I/Casting Traction Sheave 4 Grooves pully siutable for U600 gear drive, bore size 90 mm ,key size 20*7 Bore length -150 mm, width size 115 mm with main hoist rope of size 10 mm dia heavy duty suitable for 08 passenger lift serving B+G+3 & G+3 landings as per site requirement welding/brazing etc including taking down old unserviceable sheave along with all connected accessories complete all as specified and as directed. (Make :- As per OEM recommendation). |
| 45 | S&F in repalcement of MS Car Toe guard of size 800mmX950mm of minimum thickness 1.5mm suitable for fixing with 08/13/26 passenger lift cabin including all fixing accessories such as nuts, bolts, washers complete all as s pecified and as directed. ( Make- As per OEM Recommendation) |
| 46 | S&F in replacement of 300mm sweep car cabin fan, single phase, 1350RPM in lift with necessary electric connections complete all as specified and as directed by Engr-in- Charge. |
| 47 | S&F Mother Board as per existing panel specification to control lift logic, signal processing like call, floor, door, control unit, and display indicators complete all as directed. |
| 48 | Supply, install, testing and commissioning Encoder 1024PPR (suitable 08 passengers, 16 Passengers & 26 Passengers). It should be properly monitor and control the lift’s position, speed and direction. It should be functional to converts mechanical motion into electrical signals that the lift control system can interpret, ensuring smooth and accurate operation. By continuously measuring the car’s speed, the encoder to be ensures the elevator maintains a safe, controlled speed throughout its movement. It should be helps the system adjust acceleration and deceleration, providing a smooth ride experience. |
| 49 | S&F in replacement unserviceable Lift Master/Door Drive 800/1200mm complete all as directed. Make: Synergy/fermator |
| 50 | S&F in replacement variable voltage and variable frequency drive with DVR of capacity 15 KW suitable for 415 volts, AC 50 Hz for VVVF system complete all as directed. |
| 51 | S&F relay card/Main Card as reqd at site for existing lift panel all as specified and directed. |
| 52 | Supply, fixing, testing and commissioning Read Switch shaft harnish and Rubber Magnet including of suitable size alongwith all connected accessories serving G+3, B+G+3 after taking out old unserviceable one complete all as specified and directed. |
| 53 | Opening of Gear box of 08, 16 & 26 Passengers, Lift Serving G+3, B+G+3 floor for overhauling/servicing by removing the defected shaft bearing nuts bolts and removing old gear oil & repair replacement of new gear oil complete all as directed. |
| 54 | M&L for testing of treated sewage water from outlet of chlorine contact tank once in every months from NABL accredited authorized lab as per IS 3025 for recording essential |
| 55 | S&F SMPS 24V as required at site for existing lift panel complete all as specified and directed. |
| 56 | S&F OSG speed upto 1.6 Mtr/Sec suitable upto B+G+3 as reqd at site for existing lift all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender