Tender For Repair To Boundary Wall Fencing And Misc Works In Cgra, Otm At Dhq-7 And New Trade Centre At Paradip At Under Ge (I)(Cg) Bhubaneswar
Tender Value
18 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
3 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall Fencing And Misc Works In Cgra, Otm At Dhq-7 And New Trade Centre At Paradip At Under Ge (I)(Cg) Bhubaneswar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | Corrigendum No 1 | BOQ | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron and mild steel work of any descreption not other wise provided complete all as specified and directed. |
| 2 | S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified and directed. |
| 3 | S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 4 | S&F PVC coated chain link fencing of mesh size 75mm x 75mm diametre of GI wire 2.5mm and 1.5mm PVC coating over all 4.00mm any mesh, size and type to any type of standards, etc. including provision of binding wire complete all as specified and directed. |
| 5 | M&L mild steel Round bars Fe 410W (Gde.E-250) quality-A, 10mm dia and over, cut to length, bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9mm dia or securing with clips complete all as specified and directed. |
| 6 | Supply and fixing in repair of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E- 250) quality A complete all as specified and directed. |
| 7 | Material and labour preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 8 | S&F of in repair CONSEC ZAL Super punch barb tape (SRPBT) Aluminium base helix coil with and include necessary GI fixing clips for securing complete all as specified and as directed with following specification:- (i) Dia of coil(unstreched-610 mm (ii)No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-8RM (v) Central core wire:-made from 2.6 mm dia GI-H.T.S.S wireas per IS -4454 galvanised as per IS 2629.(vi) Razor Punched tape is CONSEC-ZAL steel comprising of AL base with Zinc alloy @150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulifieid green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 Nos of Horizontal ZAL runner wire for fixing of concertina coil including taking down the old unserviceable concertina coil complete all as specified and directed.Note :Only Net weight of coil incorporated at site shall be considered for measurement. |
| 9 | M/L Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 10 | S & F as in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 11 | S&F Steel rolling shutters, in repair with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type but gear operated type with chain wheel and hand chain complete all as specified and directed. |
| 12 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 13 | Supply and fixing Ball bearing for rolling shutters complete all as specified and directed. |
| 14 | Dismantling plain or corrugated steel sheeting any gauge/thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 15 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping scres complete all as specified and directed. |
| 16 | Supply and fixing Pre-painted galvatume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping scres complete all as specified and directed. |
| 17 | Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 18 | Taking down cement plaster/terrzo toping of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 19 | Material and labour for Rendering 5mm thick in CM 1:3 on ceiling of brick work or concrete surfaces finished even and smooth without using extra cement, using water proofing compound @ 3 % by weight of cement, complete all as specified and directed.Note:- water proofing compound shall be measured and paid separately. |
| 20 | M&L for prepartation of new plastered surface and applying three coats of white wash on ceiling , complete all as specified and directed. |
| 21 | Material and labour for Rendering 20mm thick in CM 1:4 on external surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, using water proofing compound @ 3 % by weight of cement, complete all as specified and directed.Note:- water proofing compound shall be measured and paid separately. |
| 22 | Material and labour for Rendering 15mm thick in CM 1:4 on external surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, using water proofing compound @ 3 % by weight of cement, complete all as specified and directed.Note:- water proofing compound shall be measured and paid separately. |
| 23 | M&L for prepartation of new plastered surface and applying two coats of white wash, complete all as specified and directed. |
| 24 | Supply only integral water proofing compound for plastering / concrete work, complete all as specified and directed. |
| 25 | Material and labour for preparation of newly plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 26 | Material and labour for preparation of old decorated wall surfaces by brooming down,steel wire brushing, scraping down moulds,efflorescent salts and trading oil greasy spots and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 27 | Supply and fixing in repair in repair 600X450 mm bevelled edge mirror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup complete all as specified and directed. |
| 28 | Demolition of brick work built in cement mortarof any description complete all as specified and directed. |
| 29 | Material and labour for brickwork with modular flyash bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 30 | Dismantling floor, hearth or wall tiling, Granite including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 31 | Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick screed bed in cement mortar (1:4) complete, complete all as specified and directed. |
| 32 | Material and labour glazed ceramic coloured tiles of size 300x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete, complete all as specified and directed. |
| 33 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick rendering in cement mortar(1:4) complete all as specified and directed. |
| 34 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, co oking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick rendering in cement mortar(1:4), complete all as specified and directed. |
| 35 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 36 | Supply and fixing in repair 15mm bore piller taps, bib tap, stop cock CP Spindle cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed. Make Jaquar,Silver shain,shakti. |
| 37 | Taking up or down steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. |
| 38 | (a) 15 mm bore |
| 39 | (b) 20 mm bore |
| 40 | (c) 25 mm bore |
| 41 | Supply and fixing GI tubes, 'medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 42 | (a) 15 mm bore |
| 43 | (b) 20 mm bore |
| 44 | (c) 25 mm bore |
| 45 | S&F Neoprene/ EPDM rubber gasket after taking down old rubber gasket for old aluminium windows, doors and partation complete all as specified and directed. |
| 46 | Material & Labour for Cleaning of any type of drain of any width and depth manually including the muds/soils, debris,small plant roots etc and removing it out of the the premises and applying two coats white wash or existing colour including preparation of old surface of drain on both side including top of the drain , Contractor shall remove the drain cover before start the cleaning of drain and after colour wash , the contractor shall fixed drain cover as is original place, complete all as specified and directed. |
| 47 | S&F in reapirs 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender