Tender For Petty Repair And Day To Day Complaints Of Salaria Officers Enclave Under Ge (West) Delhi Cantt-10.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair And Day To Day Complaints Of Salaria Officers Enclave Under Ge (West) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Petty repair to toilet floor, bathroom, kitchen, etc seepage including sunken portion treatment with water proofing compound including repair to floor trap, nahani trap, grating etc complete all as specified and directed. |
| 2 | Petty repair to wooden/ WPC door, PVC door, cupboard door, wardrobe door with shutter (size not more than 2 sqm), curtain rod including roller, windows, bulb and brackets etc with minor repair and easing and adjustment/ aligment to openable with assessories if requred any ( like roller of cupboard door, butt hinges, handle, tower bolt, beading, bow handle, etc complete) complete all as specified and directed. |
| 3 | Petty repairs to leakage of bib taps, pillar cock, stop cock, PVC connection, waste pipes, float valves, angle valve, concealed valve, GI union joints of pipe, re-fixing of bottle trap, etc. by changing the PVC washers/ Sheet washers, spindle or any other minor accessories etc complete all as specified and directed. |
| 4 | Petty repair to high or low level flushing cistern by adjusting the float valve, leaking of PVC connection, PVC bend including replacing of rubber washer, check nuts, plunger etc any type of flush complete all as specified and directed. |
| 5 | Petty repair to wall mixer,basin mixer,sink mixer etc including spindle, rubber washer etc., complete all as specified and directed. |
| 6 | Petty repair to internal/external water inlet water pipe line including socket,elbow,nipple ,with repair to water blockage, pipe line leakage including concealed water tubing etc. of any height using scaffolding, complete all as specified and directed. |
| 7 | Petty repair to renewing/matching glazed or ceramic coloured tiles in floors/walls in patches area not exceeding 0.50 Sqm including dismantling, removing and cleaning old tiles preparing beds and laying screed bed in CM 1:4 setting, jointing and pointing new or old tiles complete all as specified and directed |
| 8 | Petty repair to renewing/matching glazed or ceramic coloured tiles in floors/walls in patches area not exceeding 0.50 and 1.00 Sqm including dismantling, removing and cleaning old tiles preparing beds and laying screed bed in CM 1:4 setting, jointing and pointing new or old tiles complete all as specified and directed. |
| 9 | Petty repair to renewing/matching glazed or ceramic coloured tiles in floors/walls in patches area not exceeding 1.00 and 2.00 Sqm including dismantling, removing and cleaning old tiles preparing beds and laying screed bed in CM 1:4 setting, jointing and pointing new or old tiles complete all as specified and directed. |
| 10 | Petty repair to plain cement concrete type B1 (using 20mm graded aggregate) 1:2:4 in floor, column, beam, window cill, door cill, balcony, etc area n. exc 1 sqm of any height of bldg using scaffolding including matching to existing surfaces complete all as specified and directed. |
| 11 | Petty repair to cement plaster in CM 1:4 as in wall, ceiling, column, beam, window cill, door cill, balcony, etc, area n. exc 1 sqm any height of bldg using scaffolding including matching to existing surfaces complete all as specified and directed. |
| 12 | Taking up or down 20mm outer dia CPVC pipes & connections, including cleaning for refixing (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 13 | Refixing old 20mm outer dia CPVC pipes & connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 14 | Supplying and laying of CPVC Pipes, 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls & ceilings or laid in floors, complete all as specified and directed.Note: Supporting platform of pipeline on the roof surface will be made and rate is inclusive in this item. |
| 15 | Taking up or down 25mm outer dia CPVC pipes & connections, including cleaning for refixing or removal to store (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 16 | Refixing old 25mm outer dia CPVC pipes & connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 17 | Supplying and laying of CPVC Pipes, 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls & ceilings or laid in floors, complete all as specified and directed.Note: Supporting platform of pipeline on the roof surface will be made and rate is inclusive in this item. |
| 18 | Taking up or down 40mm outer dia CPVC pipes & connections, including cleaning for refixing or removal to store (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 19 | Refixing old 40mm outer dia CPVC pipes & connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed. |
| 20 | Supplying and laying of CPVC Pipes, 40mm outer dia SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls & ceilings or laid in floors, complete all as specified and directed.Note: Supporting platform of pipeline on the roof surface will be made and rate is inclusive in this item. |
| 21 | S&F for 20mm outer dia CPVC pipe, Brass Elbow complete all as specified and directed. |
| 22 | S&F for 20mm outer dia CPVC pipe, Brass Tee complete all as specified and directed. |
| 23 | S&F for 25mm outer dia CPVC pipe, Union complete all as specified and directed. |
| 24 | S&F for 25mm outer dia CPVC pipe, ball valve/gate valve complete all as specified and directed. |
| 25 | S&F for 20mm outer dia CPVC pipe, ball valve/gate valve complete all as specified and directed |
| 26 | S&F for 25mm outer dia CPVC pipe, Tank Adaptor complete all as specified and directed. |
| 27 | S&F for 20mm outer dia CPVC pipe, Male Brass Threaded Adapter (MTA/BTA) complete all as specified and directed. |
| 28 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall, complete all as specified and directed. |
| 29 | S&F in repair for 15 mm bore dia of pipe Bib taps long body, brass chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 30 | S&F in repair for 15 mm bore dia of pipe Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 31 | S&F in repair 15mm bore 2 in 1 angular Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 32 | S&F in repair 15mm bore Stop valves/angle valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 33 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position as per existing make and its equivalent complete in all respect as specified and directed. |
| 34 | Supply and fix in repair Brass CP sink mixer swivel spout for mixing hot & cold water for Sink screwed down for 15mm bore iron pipe or ferrul and fixed all complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 35 | Supply and fix in repair Brass CP Wall mixer non telephonic type for mixing hot & cold water for Shower screwed down for 15mm bore iron pipe or ferrul and fixed all complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 36 | Supply and fix in repair Brass CP vertical centre hole basin mixer for mixing hot & cold water for Wash Hand Basin screwed down for 15mm bore iron pipe or ferrul including connection to connection pipe all complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 37 | Supply and fix in repair brass chromium plated toilet paper holder with flat recessed type fitted with CP brass screws all complete all as specified and directed, Make:- Cera/Jaguar/kohler/hindware. |
| 38 | S&F in repair Brass Chromium plated soap dish including fixing arrangement complete all as specified and directed. |
| 39 | M&L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 40 | S&F in repairs silver shine stainless steel kitchen plate rack 1 mm thick 304 steel grade of over all size 24x30x10 inch of approved make and design including complete all as specificed and directed. |
| 41 | S&F in repairs stainless steel sink with drainage board made out of 1 mm thick sheet 304 steel grade for kitchen with plug , washer and wates, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 X460 mm of bowl size 410mm x330mm x203mm etc. complete all as specified and directed |
| 42 | S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 43 | S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in ends of brackets but including 32mm CP waste coupling, bottle trap, etc. complete all as specified and directed. |
| 44 | S&F in repair Vitreous China wash basin, white, Oval shape, under countered size as per existing model 480X560X 150 mm including waste coupling, waste pipe fix in granite top complete as specified and directed. |
| 45 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white incl 100mm traps, seat and cover; flush pipe & connecting pipe, inlet and overflow pipes for flushing cistern incl jointing to socket of flushing rim and connecting pipe to union of flushing cistern of existing make or its equivalent complete all as specified and directed. |
| 46 | S&F in repairs Vitreous china squatting pan \\"orissa\\" pattern size 580x440mm white with integral foot rests with 100mm P or S trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishing to match with the existing surface complete all as specified and directed. |
| 47 | S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white or coloured with inlet, ball valve float and handle including brackets and flush pipe fixed with water closet of existing make or its equivalent complete all as specified and directed. |
| 48 | S&F in repairs PVC connection 600mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified. |
| 49 | S&F in repair brass CP over head shower rose 125 mm dia with arm moving arrangement incl fixing to steel pipe or union complete all as specified & directed. |
| 50 | Supply and fix in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including chromium plated brass screws and wooden/ plastic cleats of existing make or its equivalent complete all as specified and directed. |
| 51 | Supply and fix in repair brass chromium plated towel ring, round type of existing make or its equivalent complete all as specified and directed. |
| 52 | S&F in repairs 600mmx450mm bevelled edge looking mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 53 | S&F in repairs 1050mm x 600mm bevelled edge looking mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 54 | S&F in repair 25mm dia curtain rod, stainless steel, chromium plated with fixing brackets, rod side bulb (02 pcs each) , stops, rollers etc, length of each rod not exc 1.80m. Complete all as specified and directed. |
| 55 | Dismantling boarding, any description, fixed in any position with screws/ nails as in kitchen drawers, cupboard etc., complete all as specified and directed. |
| 56 | Taking down and re-fixing for Solid WPC (Wood Polimer Composite) sheet 12/18 mm thick with nails/screws, complete all as specified and directed. |
| 57 | M & L for Solid WPC (Wood Polimer Composite) sheet 18 mm thick (water proof and termite proof) pre laminated one side with decorative choice colour and other side balancing white as in cub board shutter, cabinets , drawers etc. The sheet shall be finished all edges with 0.5mm beading/lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacturer’s instruction, specification as directed.Note: Wardrobe and cabinets will be factory moulded including lipping. No cutting of material will be allowed at site. |
| 58 | S&F in repair for 40mm dia, cupboard brass knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board, complete all as specified and directed. |
| 59 | M & L in repair stainless steel 3D auto close concelaed type hinges for kitchen cabinets/ cupboards/ almirah, etc. complete all as specified and directed. |
| 60 | Taking down and Re-fixing stainless steel 3D auto close concelaed type hinges for kitchen cabinets/ cupboards/ almirah, etc. using standard screws, etc. (except hinges) complete all as specified and directed. |
| 61 | S&F in repair 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 62 | S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 63 | S&F in repair 100mm size mild steel medium weight butt hinges fixed to aluminium frame complete all as specified and directed |
| 64 | S&F in repair 100mm size but hinges aluminium alloy with galvanised mild steel hinge pin type B21 complete all as specified and directed |
| 65 | S&F in repair 150mm long extruded aluminium handles, fabricated type, anodised complete all as specified & directed. |
| 66 | S&F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with angle frame with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete complete all as specified & directed. |
| 67 | M&L for alignment for aluminium joinery including all necessary fittings as required such as hook & eye, hinges, tower bolts, siliding door bolt, rollers required for sliding repairs, handles including silicon gun paste around windows complete all as specified and as directed. |
| 68 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 69 | S & F factory made 35mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Both side .14 micron laminated Flush Door Shutter with 10 mm deep CNC moulding designe of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Complete all as specified and directed. |
| 70 | S&F 35mm thick factory made 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); complete all as specified and directed. |
| 71 | S&F 35mm thick WIRE MESH SOLID WPC Pre-laminated both side In singal pice DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled/welded suitable to pass through frame. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed |
| 72 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm n.exc 4 Sqm, complete all as specified and directed. |
| 73 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mm thickness. The laminte shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat.Door frame laminate shall be 2mm thick and shallbe filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sidesM.S.stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 74 | Supply and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 75 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 76 | S&F Aluminium handles 150mm size, cast type, anodised, complete all as specified and directed. |
| 77 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section, complete all as specified and directed. |
| 78 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 79 | S&F for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring Overall length of cover plate 140 mm all as specified & directed. |
| 80 | S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed with angle frame with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete complete all as specified & directed |
| 81 | M&L Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed. |
| 82 | M&L stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden/aluminium) complete all as specified & directed. |
| 83 | M&L in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden/aluminium) complete all as specified & directed. |
| 84 | S&F in repair 4.8 mm thick tinted sheet glass selected quality, in square, n exc 0.50sqm in each pane complete all as specified and directed. |
| 85 | S&F in repair CP Grating square/ rectangle/ round 125 mm size, complete all as specified and directed. |
| 86 | M&L in repair for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 87 | S&F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified & directed. |
| 88 | S&F in repair for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring Overall length of cover plate 140 mm complete all as specified & directed |
| 89 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed. |
| 90 | M&L for Non - skid Ceramic tiles (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as spd and directed. |
| 91 | M&L for Glazed ceramic coloured tiles in vertical surface, as per existing pattern (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles, over and including 10mm thick rendering rough finished as a backing coat in CM 1:4 on fair faces of brick work or concrete surfaces complete all as spd & directed. |
| 92 | M&L for double charged Vitrified Ceramic coloured tiles, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 93 | M&L for double charged Vitrified Ceramic coloured tiles, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface/ dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over & including 10 mm thick rendering as in backing coat (rough finished) in CM 1:4 complete all as specified and directed. |
| 94 | S&F in repairs of 15mm bore size PVC PTMT bib tap complete all as specified. |
| 95 | S & F in repair 32mm bore PVC waste pipes for wash hand basin, etc. complete all as specified and directed. |
| 96 | S&F in repair for 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 97 | Supply & fix in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball (Min wt 210 gms) complete all as specified and directed. |
| 98 | S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall using clamps, etc., complete all as specified and directed. |
| 99 | S&F for 110mm bore PVC (SWR) pipe, bends, any radius, complete all as specified and directed. |
| 100 | Material and labour for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triplr layered (cylindrical vertical with closed top) hoisted and fixed in position including taking out existing unserviceable overhead tank of any description |
| 101 | Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including taking out existing unserviceable overhead tank of any description |
| 102 | S&F in repair mortice lock vertical type 100mm with 4 lever mild steel with handle chromium plated handle complete all as specified and directed. |
| 103 | M & L for brick work with sub class ' B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:4 including all arrangement including demolition of existing brick work complete all as specified and directed. |
| 104 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of existing granite, incl dismantling of the existing granite portion, complete all as specified and directed. |
| 105 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bedding in CM 1:6 and dismantling existing broken kota stone flooring complete all as specified and directed. |
| 106 | S&F in repair Locks, drawer, grade I, size 65mm lock heavy duty brass four lever,four bolt of existing make complete all as specified and directed. |
| 107 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron incl. making good existing surface complete all as specified and directed. |
| 108 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 109 | M&L 15 mm thick(average) polymer modified ready mix cement based plaster on internal and external faces of brick or concrete surfaces complete all as specified and directed. |
| 110 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 111 | M&L Preparation of newly plastered/putty surfaces and applying two coats of oil emulsion distemper on walls over and including a coat of alkali resistant primer, complete all as specified and directed. |
| 112 | M&L for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls complete all as specified and directed. Note:- During the painting work, do not use the furniture but keep it in one place covered with a tarpaulin, and ensure that any stains or spots on the floor or furniture are cleaned and washed immediately. |
| 113 | M&L for preparation of old surfaces of walls including cornices, pillasters, etc and applying one coat of white wash on wall complete all as specified and directed. |
| 114 | M&L for preparation of old surfaces of ceilings including cornices, etc and applying one coat of oil bound distemper complete all as specified and directed. |
| 115 | M&L for preparation of old surfaces of ceilings including cornices, etc and applying one coat of white wash complete all as specified and directed. |
| 116 | Cleaning and grinding, polishing by machine on old Kota stone/ granite stone surface to mirror finish wherever required to give high gloss finish complete all as specified and directed. |
| 117 | M&L for preparation of old wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed. |
| 118 | M&L for preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 119 | M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of the existing sheeting complete all as specified and directed. |
| 120 | M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of the existing sheeting complete all as specified and directed. |
| 121 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 122 | M&L for roof trusses/Fencing Fe 410-W(Gde-E- 250) quality 'A' (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 123 | Dismantling of wall and ceiling boards (fibre, pulp, insulation boards/ slabs/ blankets, any thickness, including cover fillets/ frame, complete all as specified and directed. |
| 124 | M&L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid incl anodised aluminium snap grid frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 125 | S&F in replacement of PVC water storage tank cover (white color) for 500/ 1000 ltr tank as per existing make or its equivalent, complete all as specified and directed. |
| 126 | M&L for preparation of new steel and iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over and incl a coat of red-oxide primer on steel surfaces complete all as specified and directed. |
| 127 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 128 | S&F in repair for carbon coated metal door seal strip n exe 1.20m with rubber insulation having 4mm minimum thickness complete all as specified and directed. |
| 129 | M&L for Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed. |
| 130 | S&F in repair for magnetic catches, brass body and striking plate incl letting in and fixed complete all as specified and directed. |
| 131 | S&F in repair for stainless steel telescopic drawer channel of 18 inches grade, heavy duty, polished, fixed with screws to timber/WPC drawer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender