Tender For Special Repair Or Building No P-279 Of Def And Emp, Hq 15 Corps And Wash Room Near Building No P- 238 At 7015 Eme Bn At Bb Cantt, Srinagar.
Tender Value
39.32 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
2 days left
EMD
78650
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Or Building No P-279 Of Def And Emp, Hq 15 Corps And Wash Room Near Building No P- 238 At 7015 Eme Bn At Bb Cantt, Srinagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Aug-2026 | Corrigendum for Revised BOQ | BOQ | 24-Aug-2026 |
| 2 | 24-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed. |
| 2 | Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed. |
| 3 | Taking down shutters of any description n exc 1sqm each, complete all as specified and directed. |
| 4 | M & L for 2nd class shoft wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed. |
| 5 | S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers, complete all as specified and directed. |
| 6 | S & F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc including fixing of stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with wooden bedding all in sides, complete all as specified and directed. |
| 7 | S & F Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831), bottom of size 92 x 31.75 x 1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55mm (section No 20736) and side (handle) of size 40 x 18 x 1.55mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45mm (sectio No 20737) and for wire guage shutter of size 18 x 43.50 x 1.35mm (Section No.20791) with locking arrangement including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and providing 5.5mm thick tinted glass with necessary rubber beading gasket and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc including making good to the disturbed surfaces, complete all as specified and as directed. |
| 8 | S & F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position and aluminium (anodised) grill, square, ractangular or similar section, fixed with channel of size 38 x 12 x 13mm etc., complete all as specified and directed |
| 9 | S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed |
| 10 | S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing, complete all as specified and directed. |
| 11 | S & F 100mm long butt hings cold rolled mild steel & fixed to chowkats, complete all as specified and directed. |
| 12 | S & F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed, complete all as specified and directed. |
| 13 | S & F aluminium anodised barrel tower bolts of size 125 mm extruded section and fixed, complete all as specified and directed. |
| 14 | S & F 150mm long aluminium handle cast type anodised, complete all as specified and directed. |
| 15 | S & F 125mm long aluminium handle cast type anodised, complete all as specified and directed. |
| 16 | S & F aluminium alloy anodised sliding door bolt of size 300 mm with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing, complete all as specified and directed. |
| 17 | S & F MS 300 mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 18 | S & F 150mm floor door stopper of aluminium alloy body and tounge,anodised,with hard drawn steel spring ,fixed in floor, complete as all as specified and directed. |
| 19 | S & F in repair curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 20 | Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 21 | M & L for 15mm thick rendering on brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | M & L 12mm thick rendering on brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | Material and labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat of primer of same make, complete all as specified and directed. |
| 24 | Material and labour for Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over a priming coat of same make on wall surfaces all as specified and directed. |
| 25 | Material and labour for prepration of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 27 | Material and labour for Complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 28 | M&L for preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, over 10 Cm width or girth not otherwise described and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed. |
| 29 | M&L for preparing Old Decorated/Treated steel and steel based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed. |
| 30 | Dismantling timber scantling 40 sq cm & over in section , any position in unframed work, complete all as specified and as directed. |
| 31 | S&F 2nd class soft wood clean sawn timber fixed in scantling, complete all as specified and directed |
| 32 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete all as specified and as directed. |
| 33 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall, complete all as specified and directed. |
| 34 | S&F 4mm thick Veneered one side decorative plywood, grade 1 (with BWR resin) fixed with screws on wall, complete all as specified and as directed. |
| 35 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling, complete all as specified and directed. |
| 36 | S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers on faces fixed in ceilling with screws to timber frame work, complete all as specified and as directed. |
| 37 | S&F Second class shoft wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 6 and n.exc 13 Sqcm, complete all as specified and as directed. |
| 38 | M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 39 | Dismantling plain or corrugated steel sheeting, any gauging, thickness, in roof covering, complete all as specified and as directed. |
| 40 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 41 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 42 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing), skirting, complete all as specified and as directed. |
| 44 | M & L for plain cement concrete (1:2:4) type B0 (using12.5mm graded crushed stone aggregate) 25mm thick, as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 45 | M&L for Virified Ceramic light shade tiles 8-10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 46 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 47 | M&L for Glazed ceramic colour tiles of size 450X300X7mm thick as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match and iincluding 10mm thick backing coat in CM 1:3, complete all as specified and directed. |
| 48 | M & L for plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) 75 mm thick, as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete as specified and directed. |
| 49 | M & L for plain cement concrete 1:4:8 Type D-2(using 40mm graded crushed stone aggregate) 75mm thick as in sfor foot path sub base rammed earth, complete all as specified and as directed. |
| 50 | M&L for chequered cement concrete tiles 30cm X30cmX25mm thick set, joined and pointed in neat cement slurry in floors with grey cement and pigment, including 15mm thick screed bed in cement mortar 1:4, including dismantling/demolition of old slab floor/tiles, complete all as specified and directed |
| 51 | M&L for Granite (of any type) work ,18-20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab and tiles, complete all as specified and directed. |
| 52 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed. |
| 53 | S&F 16mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. incl taking down old steel tubing & fittings of any position, complete all as specified and directed. |
| 54 | S&F 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. incl taking down old steel tubing & fittings of any position, complete all as specified and directed. |
| 55 | S&F in repair Corner glass shelf size 300mm for bath room fiting complete all as specified and directed. |
| 56 | S&F in repair glass shelf size 500x60mm for bath room fiting, complete all as specified and directed. |
| 57 | S&F in repair, brass CP Wall mixer 2 in 1, 15 mm bore, for mixing hot and cold water, screwed down for iron pipe and fixed, complete all as specified and directed. |
| 58 | S & F in repair tubular towel rail 20mm dia, D type, 60cm long between flanges brass chromium plated, complete all as specified and directed. |
| 59 | S&F in repair 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 60 | S&F in repair Soap Dish, complete all as specified and directed. |
| 61 | S & F in repair 15 mm bore CP Bib taps fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 62 | S & F in repair CP Stop valves/ angle valve 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 63 | S&F in repair wash hand basin vitreous china size 550x400mm white flat back as approved by GE, waste coupling,chain plug,pvc connection, pvc waste pipe, completed all as specified and as directed. |
| 64 | S&F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed. |
| 65 | S&F in repair Urinal spreader of CP any type for fixing with 15 mm dia pipe connection , complete all as specified and directed. |
| 66 | S&F in repair 15mm bore CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB / Sink with double action complete all as specified and as directed |
| 67 | S&F in repair 600 mm x 450 mm looking mirror with PVC frame of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 68 | S&F in repairs, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), with integral foot rest including provision of lime concrete bedding, connection to trap and anti syphonage pipe etc complete including making good to floor, complete all as specified and directed. |
| 69 | S&F in repairs PVC flushing cisterns 10 litres capacity including flushing pipe and connections, complete all as specified and directed. |
| 70 | S&F in repair PVC connection of PTMT nuts 15 x 600mm long, complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 72 | Taking down PVC pipes including all fittings like shoes, bends, swan necks etc of any dia, complete all as specified and directed. |
| 73 | S&F 110 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall/trench, complete all as specified and directed. |
| 74 | S&F 75 mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in wall/trench complete. |
| 75 | S&F PVC (SWR) bends 110 mm dia any radius, complete all as specified and directed. |
| 76 | S&F PVC (SWR) bends 75 mm dia any radius, complete all as specified and directed. |
| 77 | S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 1000 ltrs, Make : Sintex/Star/Polycon, Fusion or equvalent incl S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20 mm dia, incl taking out UNSV storage water tank, complete all as specified and directed. |
| 78 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 79 | M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 6 in brick walls, complete all as specified and directed. |
| 80 | S&F aluminium window/ventilator openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete including fixing of required 125mm tower bolt & handles etc., complete all as spcified and directed. |
| 81 | M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 cement mortar, complete all as spcified and directed. |
| 82 | M & L for 15mm thick rendering on brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement , complete all as spcified and directed. |
| 83 | S&F Rolled sections or tubular sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Steel Fe 410 -W(Gde-E- 250) quality-A etc incl dismantling wrought iron or mild steel work of any position & description, complete all as specified and directed. |
| 84 | S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 2-3mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed. |
| 85 | S & F in repair vitreous china oval bowl shape counter wash basin (white) of size 560mmx 400mm x205mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe fitting etc., complete all as specified and directed. |
| 86 | S&F in repair wall mounted rectangle decorated sides frame work corrosion free looking mirror glass of any size but 6-8mm thick of selected quality glass, including all brass fitting accessories, complete all as specified and directed. |
| 87 | S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc., complete all as specified and directed. |
| 88 | S&F in repair PVC connection of PTMT nuts 15 x 450mm long, complete all as specified and directed. |
| 89 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit, complete all as specified and directed. |
| 90 | Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade, PVC Conduct FRLS conforming to IS - 694 multistranded Conceled with new sunk type pressed steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces, complete all as specified and as directed for the following :- |
| 91 | One light/ Bell point controlled by one, one way switch 5 amps, SP, and one Ceiling Fan / Wall fan /Exhaust fan point controlled by one, one way switch and regulator,complete all as specified and as directed |
| 92 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed |
| 93 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and as directed |
| 94 | Description all as per serial Item No 90 here-in-before, but using FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 2.5 square mm FRLS PVC insulated unsheathed copper conductor earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. |
| 95 | Supply and fix MODULAR switch 1 way 6 A, 1 Module capacity 230 volts, complete all as specified and as directed. |
| 96 | Supply and fix MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed. |
| 97 | Supply and fix MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and directed. |
| 98 | Supply and fix Switch MODULAR 1 WAY 16 amps, 230 Voltsone module, complete all as specified and as directed. |
| 99 | Supply and fix electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts, complete all as specified and directed. |
| 100 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and directed. |
| 101 | Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb complete all as specified and directed . |
| 102 | Supply and fixing in replacement LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting , complete all as specified and directed. |
| 103 | Supply and fixing of LED tube light fitting with high out put diffuuser 2 feet long of 9/10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed . |
| 104 | Supply and fixing LED mirror light fitting with high out put diffuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set and including providing of suitable type flat flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old existing fitting, complete all as specified and directed. |
| 105 | Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric, connection all as specified and directed. |
| 106 | Supply anf fix in repair LED Security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed.Make - Havells, or equivalent in Crompton ,wipro,Philips etc., complete all as specified and directed. |
| 107 | S & F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with hanging in Celling with down rod, clamps, nut bolts in proper manneer at the centre of room complete all as specified and directed. |
| 108 | Supply & fixing of ventilating exhaust fan made out of mild steel body, complete with louvers,and shutter operational of size 300 mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall Including takind down of existing fan compete all as specified and directed. |
| 109 | Supply & fixing of ventilating exhaust fan made out of complete sturdy engineering plastic body with having motor ,frame louvers & shutter and blade suitable for of size 250 mm 230 Volts including making of suitable type /size of hole on wall etc compete all as specified and directed. |
| 110 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 111 | S & F Storage type Water heater (Geyser) 5 STAR of Cap 25 Litres working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold) fixing arrangement with nut bolts and making good the disturbed surface, complete all as specified and directed. |
| 112 | Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface all as required at site or directed . |
| 113 | Supply and fixing of recessed / ceiling concealed mounted flate slim type unique square LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36Watt 220 volt AC recessed type with high efficiency PMMA didduser soft glare free light complete with driver, holder & LED lamps suitable used for roof ceiling and required fitting use in both warm/white type colour complete including cutting /making suitable size of hole on wooden ceiling board surface area for fixing/intallation of ceiling light fitting purposed complete work and providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 114 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4/6 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 115 | Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed. |
| 116 | Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 10sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed. |
| 117 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 08 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 118 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 8 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface, complete all as specified and directed. |
| 119 | Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site, complete all as specified and directed. |
| 120 | S&F MCB SPN 40 to 63 Amp, 240 Volts, with breaking capacity 10 kA rupturing capacity, 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 121 | S&F MCB SP 06 to 32 Amp, 240 Volt, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection complete all as specified and directed. |
| 122 | Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 6.0 square mm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 6.0 square mm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed.Note: 3 runs of 6 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 123 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed. |
| 124 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed |
| 125 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed. |
| 126 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
| 127 | M&L of locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 128 | Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed. |
| 129 | Supply and fix automatic high speed motion sensor hand dryer for washroom, 1800watt, 230 volt, 50 Hz, automatic cut off after approx 5-10 seconds to save power, complete all as specified and directed. |
| 130 | Notes :-An amount of Rs 1,01,895.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender