Tender For Provision Of Otm Accommodation For 40 X Or Of Auli Bn At Mana Under Ge 871 Ews.
Tender Value
7.74 Crore
Estimated cost
Bid Submission
10 Sep 2026
23 days left
EMD
7.12 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamoli → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Otm Accommodation For 40 X Or Of Auli Bn At Mana Under Ge 871 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A PART-I (BUILDING WORK) |
| 2 | Construction of OTM ACCN for 08 X HAV and 32 X OR (Triple story) complete all as specified and as shown on drawing. |
| 3 | Construction of Plant Room (Single Story) complete all as specified and as shown on drawing |
| 4 | Construction of RCC UG SUMP OF CAPACITY 20000 LTRS complete all as specified and as shown on drawing |
| 5 | SCHEDULE A PART II (Internal Water Supply) for details refer Sch A in pdf folder |
| 6 | SCHEDULE A PART III-A (Internal Electric Supply) for details refer Sch A in pdf folder |
| 7 | SCHEDULE A PART III-B (Internal Electrification) |
| 8 | M & L for point wiring with copper conductor cable multistrand, PVC insulated unsheathed 1.5 Sqmm size FRLS for one light point./for fan point/exhaust fan controlled by one switch including one run of 1.5 Sqmm multistranded FRLS PVC unsheathed copper conductor cable for earth continuity in and including concealed non metalic rigid PVC conduit medium grade size 20 & 25mm dia with all fittings (ISI Marked), including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading 'Point wiring' fixed on walls/ceiling including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories etc all as specified and directed. |
| 9 | All as per Srl item No 4.01 here in before but for one 5 amps socket out let on same board. |
| 10 | All as per Srl item No 4.01 here in before but for one 5 amps socket out let on independent board, |
| 11 | M & L for point wiring for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 4.0 Sqmm FRLS on independent board including one run of 4.0 Sqmm multistrand FRLS PVC sheathed copper conductor cable for earth continuity in and including concealed non metalic rigid PVC conduit medium grade size 20 & 25mm dia with all fittings (ISI Marked), including providing suitable size of copper lugs and all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading 'Point wiring' fixed on walls/ceiling including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories etc all as specified and directed. |
| 12 | Supply & Fixing Modular switch 1 way 6A,1 module.all as specified and directed. |
| 13 | Supply & Fixing Socket, 6A - 2/3 pin combined 2 module all as specified and directed. |
| 14 | Supply & Fixing Modular switch 1 way 16A,1 module all as specified and directed. |
| 15 | Supply & Fixing Modular Socket 6A/16A - 2/3 pin combined 2 module,all as specified and directed. |
| 16 | Supply & Fixing 1 module modular white cover plate with frame all as specified and directed. |
| 17 | Supply & Fixing 2 module modular white cover plate with frame all as specified and directed. |
| 18 | Supply & Fixing 3 module modular white cover plate with frame all as specified and directed. |
| 19 | Supply & Fixing 4 module modular white cover plate with frame, all as specified and directed. |
| 20 | Supply & Fixing 6 module modular white cover plate with frame, all as specified and directed. |
| 21 | Supply & Fixing 8 module modular white cover plate with frame,all as specified and directed. |
| 22 | Supply & Fixing 1/2 module modular flush box all as specified and directed. |
| 23 | Supply & Fixing 3 module modular flush box all as specified and directed. |
| 24 | Supply & Fixing 4 module modular flush box all as specified and directed. |
| 25 | Supply & Fixing 6 module modular flush box all as specified and directed. |
| 26 | Supply & Fixing 8 module modular flush box all as specified and directed. |
| 27 | S & F tube light fitting with wall mounted LED integrated batten fitting 20 W LED T-5, 4 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. |
| 28 | Supply and fixing building security light 1x35 watt LED complete with tuff net glass protection IP 66, fixed to wall including with GI bracket made out of light grade 32 mm dia tubing up to 1.2 mtr lenth bend to shape with two sets of MS clamps made out of 25x3 mm flat iron with suitable nuts and bolts and testing complete all as specified and directed. |
| 29 | Supply & Fixing TP&N vertical sheet metal enclosure for DBs double door (Suitable for TP/FP ‘G FRAME’ MCCB as Incomer) with 160 Amps rated Bus-Bar 415 volts,12 way fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) with fixing arrangement complete all as directed by Engr-in-charge, |
| 30 | Supply & Fixing MCCB, 125 A,4 pole 16kA,415 Volts with extended copper terminals complete all as specified and directed. |
| 31 | Supply and fixing SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 32 | Supply and fixing SP 6 to 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 33 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 34 | M & L for Sub main wiring with single core FRLS, PVC insulated and unshseathed copper wire multistrand of size 2 x 10 sqmm along with 10 sqmm single core FRLS, PVC insulated unseathed copper wire as earth wire connecting to common earth including providing suitable size of Copper lugs for connections of cable with MCBs or bus bars and including PVC casing and capping of appropriate size and best quality ISI marked complete all as specified and directed. |
| 35 | M&L for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, with CI cover,funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 1.0 OHMS. Note- In case earth resistance more than 1.0 ohms, the contractor will re earthing at no extra cost. |
| 36 | SCHEDULE A PART IV ( SITE CLEARANCE AND EARTH WORK) for details refer Sch A in pdf folder |
| 37 | SCHEDULE A PART V (PROTECTIVE WORK) for details refer Sch A in pdf folder |
| 38 | SCHEDULE A PART VI (ROAD/PATH/CULVERT for details refer Sch A in pdf folder |
| 39 | SCHEDULE A PART VII-A (SEWAGE DISPOSAL) for details refer Sch A in pdf folder |
| 40 | SCHEDULE A PART VII-B (SEWAGE DISPOSAL) |
| 41 | M & L RCC Septic tank for 50 users conventional type designed to carry sewage and sludge water excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle walls and roof slab including beams etc with vent shaft, manhole openings with cover connection etc complete all as specified and as shown on Drgs No TD-129 sh1/3 to 3/3 complete all as specified and directed. |
| 42 | M & L Soakage well excavation, in any type of soil,foundation in PCC 1:3:6,walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM,RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size of 2.40 M dia × 4.50 M effective depth complete all as shown on Drg No TD -309 Sht 1/4 to 4/4 complete all as specified and directed. |
| 43 | SCHEDULE A PART VIII (AREA DRAINAGE) for details refer Sch A in pdf folder |
| 44 | SCHEDULE A PART IX A (EXTERNAL WATER SUPPLY) for details refer Sch A in pdf folder |
| 45 | SCHEDULE A PART IX B (EXTERNAL WATER SUPPLY) |
| 46 | Construction of valves pit chamber having internal dismention 600 mm x 600 mm x 600 mm (internal dimensions) using PCC (1:4:8)40 mm graded stone aggregate for foundation 15 cms thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20mm graded aggregate for grouting MS frame including 6 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame made out of 60 x 60 x 6 mm thick angle iron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coal including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as specified and directed by the Engineer-in-Charge. |
| 47 | Constructions of brick masonry valve pit of size 900mmx900mmx900mm (internal dimensions) one brick thick wall in cement mortar (1:4) on 100 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation, 15mm thick rendering internally, externally up to 15 Cms below GL provision of valve pit cover made out of 3mm thick MS plate welded with 40 x 5mm thick F1 frame all round including provision of hinges, handles, locking arrangement, ISA 40 x 40x 5mm frame, fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC 1:2:4 type B1 (Block size 230 x 200 x 100mm) including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, three coats of white wash on plastered surface and necessary earth work in soft/loose soil complete all as specified and directed. |
| 48 | Cutting main pipes of dia 100 mm and reducing to required length in position for insertion of new Tee, branches etc |
| 49 | S&F cast iron air valves with single air outlets , conforming it IS 14845 of size 50mm dia bore and fixing up in cast iron water supply mains of size 50,mm complete all as specified and directed. |
| 50 | S&F foot valve conforming it IS 4038 of size 50mm dia bore complete all as specified and directed. |
| 51 | S&F Stequa Dosing System Model ADS – PRO, Power-free automatic erosion feed enabled water sanitizer / conditioning treatment station with proportional dosing arrangement consisting of: (1) Receptacle with following attachments: (a) Water Inlet Regulator (b) Overflow Vent (c) Water Outlet Regulator with non-return valve (for standalone gravity flow) (d) Water Outlet Regulator (for offline automated gravity flow) (e) Drain valve (f) Fluid Level controller (g) Sludge Level Guage (h) Station Base Assembly with Station Base Buffer (i) Station Hood Assembly with multi-cavity arrangement (11) (j) Station Holding Assembly ( k) Material of construction: Non-metallic thermoplastic (l) Maximum Temperature: 45°C (m) Capacity: 100 litres (n) Shape: Cylindrical ( 2) Custom cover with following attachments: (a) Refill Cavity Lids (11) (b) In-built Level Switch & Processor ( c) ½ inch Processor Outlet & Processor Inlet connections ( d) Flexible Connecting Duct (e) Material of construction: Non-metallic (f) Maximum Temperature: 45°C (g) Shape: Circular (h) Cavity Lids storage binCompatibility: Stequa 411 AE Refill Make: Declibac or equivalent |
| 52 | S&F Stequa 411 AE Refill Chlorine tablets contained in plastic cylindrical sealed disposable sanitiser refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through recommended dosing system. Replacement indication: visual & weight variation Water contact orifice design: Sealed when dry, exposed upon immersion Operation type: Non contact, non inhalatory Cylinder dia: 2.5 inches ± 0.5 inches Cylinder height: Minimum 10.0 inches ± 0.5 inches Make: Declibac or equivalent |
| 53 | Supply and fixing DOL Starter suitable for motor of capacity 2 HP , 1 pahse, 230 V, 50 Hz , in sheet steel enclosure type complete all as specified directed . Make : L&T /Indoasian/ Legrand/ Havells or equivalent as per appx C |
| 54 | Supply, install, testing and commissioning factory assembled monoblock hiigh pressuer pump of capacity 2.0 HP (1.50kw) size pipe 50X40 mm , suitable for Head 25-30 Mtrs , 21000 L/h -6960 L/h discharge range ,Stainless steel impeller , stainless steel shaft , mechanical seal suitable for temp upto 110 degree celcius ,horizontal split casing with suitable squirell cage electric motor Single phase 3000 RPM 50 Hz and PCC foundation as per manufacturer's instructions, including MS box of of size 1x1x1 mtrs both side openable and porvision for fixing of DOL Starter , electric cable of suitable size from pump to DOL Starter complete all as specified and directed . |
| 55 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 3 KW capacity 50 litre, BEE 3 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed |
| 56 | SCHEDULE A PART X A (EXTERNAL ELECTRIC SUPPLY) for details refer Sch A in pdf folder |
| 57 | SCHEDULE A PART X-B (EXTERNAL ELECTRIC SUPPLY) |
| 58 | M&L for local sand cushioning dry, to UG cables (8cm deep before laying of cable and 15 cm deep over the cable ) filling in trenches around under ground cable all as specified and directed.Note :- For the purpose of payment only punned thickness will be measured. |
| 59 | M&L for providing new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable all as specified and directed. |
| 60 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm. |
| 61 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core |
| 62 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core |
| 63 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core |
| 64 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core |
| 65 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core |
| 66 | Supply and erect Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-55 (11.00 metres long) consisting of anticlimbing device. |
| 67 | Supply and erect Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 metres long) consisting of anticlimbing device. |
| 68 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 69 | Supply and fixing of Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20 cm size complete all as specified and directed by Engr-in-Charge. |
| 70 | Supply and fix pole box size 450 x 300 x 200 mm fabricated out of 2 mm thick MS Sheet having 4 Nos aluminium busbar of suitable size with 1 No. MCB SP 6 Amps front openable hinged cover outdoor type weather proof suitable for mounting on steel pole including fixing MS clamp 02 Nos with nuts, bolts and washers complete all as specified and directed. |
| 71 | Supply and fix bracket made out of GI tubing single piece not wleded bended at proper angle of size 40mm dia,light grade 1.5 mtr long including painting with aluminium paint over one coat of red oxide to the bracket etc complete.including 1.5 sqmm 3.0 core flexible Copper cable in PVC conduit with clamp from juction box to connecter of street light fitting. |
| 72 | M & L Lightning arresters expulsion type ( Set of 03 ) suitable for 11000 Volts complete with all fittings, transmission class, discharge capacity 65 kilo amp complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply and fix HT 11 KV out door type gang operated air-break switch triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps complete with drop out fuse having 15 insulators of rating upto 200 Amps |
| 74 | Supply and fixing of disc type insulators, porcelain vitreous white brown or green, 145mm high and 255mm dia ball and socket type, single disc assembly for tension with tension clamps for conductor having working pressure 11000 Volts complete all as specified and directed. |
| 75 | Supply and fixing of stay assembly complete with accessories i.e. stay plate 300mm x 300mm x 6mm, galvanised thimbles, GI stay wire 7/4 SWG, loop type insulators, vitreous porcelain, white brown or green of large size with overall dimensions 90mm x 140mm, clearance of hole 25.5mm, etc and all other accessories as shown in electrical plate No 1 on Ser Page No 495 of MES Schedule Part-I (2009) including PCC complete all as specified and directed. |
| 76 | Supply and fixing of Pin insulator Porcelain, vitreous white/brown/green insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, large size with overall dimensions 90mm x 140mm, clearance of hole 25.5 mm, complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply and installation of copper wound transformer step down, outdoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity upto 400 KVA Note :- (a) Brick work foundation suitable for 400 KVA Step down transformer,having 100 mm PCC on top type C1 (1:3:6) at top and PCC B2 (1:4:8) at bottom complete all as directed at site. |
| 78 | Supply, installation commissioning and testing of servo motor controlled voltage stabilizer for automatic operation on unbalanced load, three phase naturally oil cooled outdoor type (IP-55, CPRI approval required) Copper wound including first filling of oil of dielectric strength not less than 40 KV with MCCB and bypass system & designed for input variation between 280 V to 480 V with output voltage stabilized at 415 V with accuracy + 2.5 % and speed of correction 8 Volts per second and of capacity 400 KVA complete all as specified and directed Make - Volina (Vintek Electronic) or equivalent AE/AplabNote : Brick work foundation suitable for 400 KVA Voltage ,having 100 mm PCC on top type C1 (1:3:6) at top and PCC B2 (1:4:8) at bottom complete all as directed at site. |
| 79 | Supply, installation, testing & commisioning of totally enclosed HT feeder pillar Busbar chamber outdoor type (IP-55) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powder coated double door front and back openable type including locking arrangement bus bar chamber enclosed complete suitable for operation on 11000, 50 Hz AC supply having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms. Brick masonary plateform should be 60 cms above the Ground Level comprising the following :- (a) 60x10 Sqmm cross section area conductive electrolytic grade copper bus bar of required length with heat shrinkable sleeves, duly colour coded. (b) Bakelite insulators having short circuit with stand capacity of 26.3 kilo Amp - 01 (Set of three) Notes:- (i) The panel shall be front operated with cable entry from the bottom with cable glands. The fault with standing capacity shall be 25 KA. Earth bus shall be part of the main feeder pillar.(ii) Width of feeder pillar box shall not be less than the panel not less than 60 cm.(iii) Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundation PCC 1:4:8 type D-2 including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate), deemed to be included in the item rate. No Extra payment will be made. |
| 80 | Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm |
| 81 | Supply and fix cable jointing kit for 11 KV grade cable for indoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm |
| 82 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6.00 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion..(Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.) |
| 83 | M&L for earthing complete with using copper earth plate (electrode) 300 x 300 x 3.15 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 25 x 3 mm copper strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, copper earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion..(Note : 1. If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.) |
| 84 | Supplying and laying synthetic Rubber insulated mat 2 mm thick for voltage up to 3.3 KV for electrical purpose as per is 15652-2006, (superseding IS 5424) suitable for electrical shok safety of size 2mx1m |
| 85 | Supply, install, testing and commissioning of LT Panel board CPRI approved outdoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulators .The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 50X50X5 mm duly embedded in PCC platform and duly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable all as directed at site and comprising of the following:INCOMINGACB 4 Pole, 415 V, Manual Drawout type with microprocessor release of capacity 630 Amps - 01 Nos |
| 86 | OUTGOING4 Pole MCCB 320 to 400 Amp, 50 Hz, 415 V ,36 KA - 01 NosMCCB 4 pole 160 Amps 25 kA - 01Nos MCB SPN 20-32 Amps 16 kA - 01 Nos Multifunctional VAF meter, PF meter - 1 No RYB Neon indicating lamp -1 set for each outgoing and incoming MS work incl angle iron frame and PCC workSpace for mounting of additional MCB In future.Internal wiring including copper lugsNote : Bottom portion of the enclosure should be minimum 120 cm above the ground levels of legs of angle iron |
| 87 | Supply, install, testing and commissioning of LT Panel board CPRI approved indoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 240 Amps rating mounted on porcelain insulators .The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 50X50X5 mm duly embedded in PCC platform and duly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable all as directed at site and comprising of the following:INCOMING4 Pole MCCB 320 to 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA - 01 Nos |
| 88 | OUTGOINGMCCB 4 pole 160 Amps 36 kA - 01 NosMCCB 4 pole 63 Amps 25 kA - 03 NosMCCB 2 pole 40 Amps 16 kA - 01Nos MCB SP 20 Amps 10 kA - 01 Nos Multifunctional VAF meter, PF meter - 1 No RYB Neon indicating lamp -1 set for each outgoing and incoming MS work incl angle iron frame and PCC workSpace for mounting of additional MCB In future.Internal wiring including copper lugsNote : Bottom portion of the enclosure should be minimum 90 cm above the ground levels of legs of angle iron |
| 89 | Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint |
| 90 | SCHEDULE A PART XI (CENTRAL HEATING SYSTEM) Please Enable Macros to View BoQ information |
| 91 | SCHEDULE A PART XI (CENTRAL HEATING SYSTEM) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender