Tender For Provision Of Stp At K Area Under Ge Chandigarh
Tender Value
6.42 Crore
Estimated cost
Bid Submission
07 Sep 2026
13 days left
EMD
6.46 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Stp At K Area Under Ge Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Total amount of Sch 'A' Sec I BUILDING WORKS Lump sum price worked out by the contractor for \\" BUILDING WORKS \\" as listed in schedule 'A' Part-I. |
| 2 | Total amount of Sch 'A' Sec II SITE CLEARANCE WORK Lump sum price worked out by the contractor for \\" SITE CLEARANCE WORK \\" as listed in schedule 'A' Part-II |
| 3 | Total amount of Sch 'A' Sec III INTERNAL WATER SUPPLY Lump sum price worked out by the contractor for \\"INTERNAL WATER SUPPLY \\" as listed in schedule 'A' Part-III |
| 4 | Total amount of Sch 'A' Sec IV INTERNAL ELECTRIC SUPPLY Lump sum price worked out by the contractor for \\"INTERNAL ELECTRIC SUPPLY \\" as listed in schedule 'A' Part-IV |
| 5 | Total amount of Sch 'A' Sec V ROADS,PATH AND CULVERTS Lump sum price worked out by the contractor for \\" ROADS,PATH AND CULVERTS \\" as listed in schedule 'A' Part-V |
| 6 | Total amount of Sch 'A' Sec VI EXTERNAL WATER SUPPLY WORKS Lump sum price worked out by the contractor for \\" EXTERNAL WATER SUPPLY WORKS \\" as listed in schedule 'A' Part-VI |
| 7 | Total amount of Sch 'A' Sec VII EXTERNAL ELECTRIC SUPPLY Lump sum price worked out by the contractor for \\" EXTERNAL ELECTRIC SUPPLY \\" as listed in schedule 'A' Part-VII. |
| 8 | Total amount of Sch 'A' Sec VIII AREA DRAINAGE WORK Lump sum price worked out by the contractor for \\" AREA DRAINAGE WORK \\" as listed in schedule 'A' Part-VIII. |
| 9 | Total amount of Sch 'A' Sec IX CHAIN LINK FENCING AND GATE WORKS Lump sum price worked out by the contractor for \\" CHAIN LINK FENCING AND GATE WORKS \\" as listed in schedule 'A' Part-IX. |
| 10 | SEWAGE TREATMENT WORK |
| 11 | Designing (hydraulically, structurally, and architecturally), providing, constructing, installing, testing, commissioning, and successfully putting into operation a Sewage Treatment Plant (STP) of 340 KLD capacity based on approved and proven sewage treatment technology, including all civil, mechanical, electrical, instrumentation, automation, piping, and allied works complete in all respects.The scope shall include preparation and submission of detailed design calculations, drawings, procurement and supply of all materials and equipment, erection, hydraulic testing of all units and pipelines, trial run operation, performance testing, obtaining required approvals, and handing over the plant in satisfactory working condition to GE, complete as per specifications given in DBR, approved drawings, Particular Specifications etc complete all as specified and directed. |
| 12 | M&L for on line continous monitoring system for-340 KLD STP facilitate with supply,installation,testing,commissioning and operated as per the folllowing description:(a) Supply installation, testing, commissioning & calibration of ONLINE CONTINUOUS EFFLUENT MONITORING SYSTEM (COD, BOD, TSS, pH, Ammonia, temperature) HAVING MONITOR WITH DISPLAY and DATA LOGGING for treated sewage effluent. (b) Supply, installation, testing commissioning and calibration of ELECTROMAGNETIC ONLINE FLOW METER with data logging range 0-maximum five times of anticipated flow in m3/hr for specified size pipe, complete all as required and directed.(c) Supply, installation, testing commissioning and calibration of ULTRASONIC/ MAGNETIC LEVEL SENSOR for automation of existing/ proposed sewage transfer pumps, Duty Standby/ Duty assist mode along with connected control cables and other accessories. (d) Supply, installation, testing, commissioning and calibration of Rack/DIN mounted PLC/ RTU having expandable memory of up to 4GB with Rack/DIN based Analog and Digital Modules and 24V DC Rack/DIN power supply and stand -by and having advanced diagnostic available via network for temperature sensing, remaining lifetime data, etc Rack/DIN PLC having advanced diagnostics, should be compatible with automation system. The System must be water proof and able to function in corrosive environment. (e) Supply, installation, testing and commissioning of Industrial/ Commercial grade ETHERNET SWITCH |
| 13 | (f) Supply, installation, testing and commissioning of SMART ENERGY METER with memory real time clock having CI 0.5 accuracy & Modbus/ RTU communication over RS485 and 1 serial port integrated with RTU.(g) Supply, laying, testing and commissioning complete CABLES of different sizes, cores and length as per site requirement, armoured, if required, for installation of PLC, SCADA, Flow-meter, OCEMS and various other items of system as specified.(h) Supply and installation of SCADA CONTROL STATION HARDWARE with necessary Software and latest configuration.(j) Full development and Runtime version of required SCADA SOFTWARE suitable for digital and analog input/ output based on capacity of STP and sewer network as customization of software as per requirement. (k) Supply, installation, testing & commissioning of PLC or RTU based pump, automation and protection Master control panel for 03/05 Nos pumps on sewage lift-well/ pump station including Ultrasonic level sensors of suitable size fabricated from 2.0 mm (indoor)thick CRCA sheet and properly power coated to operate the sewage pumping installations system and act as a user control and audio visual annunciation panel wall mounted of suitable size. The PLC/RTU offered must be tested form NABL lab. Suitable UPS battery pack with weatherproof enclosure should be provided. |
| 14 | Supply and installation of hi wall split units capacity 1.5TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating complete all as specified and directed. |
| 15 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and directed. |
| 16 | Providing, laying & compaction of Bituminous Macadam (BM) 50 MM compacted thickness conforming to clauses 504 of MORTH specification for Road and Bridge Works (Fifth Revision), using mechanically crushed stone aggregates and granual material etc. of grading 11 as per table 500-7 of MORTH specifications for Road and Bridge Works (Fifth Revision) premixed with bituminous binder, bitumen grade VG-30 @ 3.50% (percentage by wait of total mix)prepared in Batch Type Hot Plant of 100-120 TPH capacity transported to site by tibbers , laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density complete all as specified and directed.Notes : (i) The contractor shall quote the rate against Item considering 3.5% VG-30 bitumen content. Mix Design for bituminous macadam shall be got designed from NIT/CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 3.4% by weight of total mix as per clause 507.2.4 of MORTH specifications (Fifth Revision). (ii) If quantity of binder contents is less than the quantity as specified in respective items of BOQ , it shall be adjusted at supply only rates of paving bitumen @ Rs 45.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made. |
| 17 | Providing and laying 30 mm thick (consolidated thickness) Bituminous Concrete (BC) layer conforming to clauses 507 of MORTH specification for Road and Bridge Works (Fifth Revision), including cost of coarse aggregates fine aggregates, filler, 5.5% binder Bitumen grade VG-30 content by weight of total mix and crushed aggregaters of grading 2, Anti Stripping Agent, Warm Mix Additives (quantity, quality and garde as per the mineral aggregate, filler & bitumen to the specific temperature, thoroughly mixing with binder of specified bitumen content, Anti Stripping Agent, Warm Mix Additives as per design in Hot Plant (Batch Type) of 100-120 TPH capacity, carrying the hot mixed materials by means of tipper, trucks, or any other a pproved and suitable arrangements, laying the hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber thorough rolling with power roller 8 to 12 tonnes smooth wheeled , vibratory and tandem roller with necessary hand packing and pinning to give an even surface, including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-Charge, required quality contorl tests at required interval etc complete in all respects complete all as specified and directed. Note -(i) The contractor shall quote the rate against Item considering 5.5% VG-30 bitumen content. Job mix formula as per clause for bituminous concrete shall be got designed from NIT/CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen cntent shall not be less than 5.4% by weight of total mix as per clause 507.2.5 of MORT&H specifications (FifthRevision). . Please Enable Macros to View BoQ information |
| 18 | Providing and laying 30 mm thick (consolidated thickness) Bituminous Concrete (BC) layer conforming to clauses 507 of MORTH specification for Road and Bridge Works (Fifth Revision), including cost of coarse aggregates fine aggregates, filler, 5.5% binder Bitumen grade VG-30 content by weight of total mix and crushed aggregaters of grading 2, Anti Stripping Agent, Warm Mix Additives (quantity, quality and garde as per the mineral aggregate, filler & bitumen to the specific temperature, thoroughly mixing with binder of specified bitumen content, Anti Stripping Agent, Warm Mix Additives as per design in Hot Plant (Batch Type) of 100-120 TPH capacity, carrying the hot mixed materials by means of tipper, trucks, or any other a pproved and suitable arrangements, laying the hot premixed materials over the prepared surface by means of paver finisher including manual operation as and when required for proper grade, level and camber thorough rolling with power roller 8 to 12 tonnes smooth wheeled , vibratory and tandem roller with necessary hand packing and pinning to give an even surface, including running expense of all plants and machineries, inclusive of proper traffic control during laying to the satisfaction of Engineer-in-Charge, required quality contorl tests at required interval etc complete in all respects complete all as specified and directed. Note -(i) The contractor shall quote the rate against Item considering 5.5% VG-30 bitumen content. Job mix formula as per clause for bituminous concrete shall be got designed from NIT/CTL/ Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen cntent shall not be less than 5.4% by weight of total mix as per clause 507.2.5 of MORT&H specifications (FifthRevision). . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender