Tender For Special Repair To Building No. 12A, 12B, 13A, 13B (44 Qtrs) In Arjan Vihar Under Ge (Central) Delhi Cantt-10
Tender Value
10.58 Crore
Estimated cost
Bid Submission
31 Aug 2026
16 days left
EMD
8.54 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. 12A, 12B, 13A, 13B (44 Qtrs) In Arjan Vihar Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | B/R ITEMSM&L for providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 2 | M&L for anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors, complete all as specified and directed. |
| 3 | M&L for providing & injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same, complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall), complete all as specified and directed. |
| 5 | M&L for reinforced cement concrete 1:2:4 type B1 (Nominal mix) (20 mm graded crushed stone aggregate) as in fins, slab ,facias, louvres, parapets, and railings, newels, balustrade, and the like, complete all as specified and directed. |
| 6 | S&F TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars, complete all as specified and directed. |
| 7 | S&F 8mm dia TMT bars, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and directed. |
| 8 | M&L for use & waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed. |
| 9 | M&L for use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete, complete all as specified and directed. |
| 10 | M&L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 (up to 07 storey buildings), complete all as specified & directed. |
| 11 | M&L for old size brick work with sub class \\"B\\" bricks , straight or curved on in half brick thick wall built in cement mortar 1:4 (up to seven storey bldgs.), complete all as specified and directed. |
| 12 | All as per Srl item No 10 here-in-before before but except bricks. |
| 13 | Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar, complete all as specified and directed. |
| 14 | Demolition of mud in roof, any thickness, including plastering and leaping up to seven story bldgs. including necessary scaffolding arrangement ,(whether full thickness removed or only a part there of) and removing from cantonment area as as directed, complete all as specified and directed. |
| 15 | M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded crused stone aggregate) as in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work, complete all as specified and directed. |
| 16 | M&L for APP based polymeric membrane one side plain and one side rough finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints, complete all as specified and directed. |
| 17 | S&F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 9 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner, complete all as specified and directed. |
| 18 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded crused stone aggregate in as in levelling coarse over RCC slab to bring the desired slope up to six storied Bldg, using integral water proofing compound as per manufacturer instructions, complete all as specified & directed.Note:- Integral water proofing compound shall be measured and paid for separately under respective item. |
| 19 | Demolition of stone slab and tiles of any description or thickness on steps, jambs, pillars, walls, cooking platform, floors, aprons, skirting etc laid bedded and pointed in cement mortar, complete all as specified and directed |
| 20 | M&L for 18-20mm thick granite table rubbed and polished in wall lining, fixed with 15 mm thick backing coat in cement mortar 1:3, complete all as specifed and directed. |
| 21 | M&L for 18-20mm thick granite table rubbed and polished AS in cooking platforms, fixed with 20 mm thick screed bed in cement mortar 1:4, complete all as specifed and directed. |
| 22 | M&L for drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite, complete all as specified and directed. |
| 23 | M&L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, window cills, and like including including 15mm thick screed bed in cement mortar 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounded edges with shade of granite, complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 25 | M&L for double charged, super glossy/ hi gloss vitrified tiles light shade 9 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), in floors etc. set jointed and pointed with epoxy tile grout to match the colour of tiles using 3mm thick PVC spacers match over and including 15mm thick screed of cement mortar (1:4), complete all as specified and directed. |
| 26 | M&L for double charged super glossy/ hi gloss vitrified tiles (light shade) 9 to 10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size as in skirting laid over and including 10mm thick cement plaster in cement mortar (1:3), set jointed and pointed with epoxy tile grout to match the colour of tiles using 3mm thick PVC spacers, complete all as specified and directed. |
| 27 | M&L 600x600mm non skid ceramic tiles matt finished in floors etc.set jointed and pointed with epoxy tile grout to match the colour of tiles using 3mm thick PVC spacers to match and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 including scantling, complete all as specified and directed. |
| 28 | M&L for coloured ceramic tiles of size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 29 | M&L for supper gloss/ hi gloss vitrified tiles of approved colour and design in vertical surfaces 600mmx1200 mm including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:3, complete all as specified and directed. |
| 30 | M&L for Glazed ceramic tiles of approved colour and design in vertical surfaces 450x300x7mm thick including provision of high lighter tiles/boarder and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:3, complete all as specified and directed. |
| 31 | S&F Bath room vanity unit of overall size 580x400x700mm (approx) with multiple cabins with outside openable two shutter made of water proof coating/items/with two nos of 100mm stainless steel handle with hinges and auto lock and 16-18mm thick black polish granite with counter type Table Top while ceramic basin of size: 42x42x15cm table mouted type including cuplink and waste pipe with stainless steel bottle trap of 32mm size with 250mm & long flexible tube & wall hook with NRV bottle trap and all fittings to proper functional condtion, complete all as specified and directed.Make of Basin: Jaguar Cat Part No.JDS-WHM-25911, Hindware Cat Part No. 91238, Cera Cat Part No. S2020153, Kohler Cat Part No K-31459IN-0, Make of Bottle trap : Jaguar, Cera, Hindware, Kohler |
| 32 | S&F in repair Vitreous China rimless wash down water closet pan single piece symphonic action, white, including soft close sheet cover of closed pattern with flat bottom, complete all as specified and directed. Hindware Cat Part No. 92573, Jaquar Cat Part No.WC OPS-WHT-15853S300UF, Kohlar Cat Part No.77739T-SL-0, Cera Cat Part No. A1014110 |
| 33 | S&F in repair Vitreous China rimless wash down water closet pan wall mounted symphonic action , white, including soft close sheet cover of closed pattern with flat bottom, complete all as specified and directed. Jaquar Cat Part No.WC KUS-WHT-35953BIUFSM, Cera Cat Part No.S1043148 |
| 34 | S&F in repair single piece concealed cistern 10 ltr capacity inlet ball valve float and handle including brackets, complete all as specified and directed. |
| 35 | S&F in repair flush plate for concealed cistern, complete all as specified and directed. |
| 36 | S&F Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, including Exposed and Concealed Part (diverter) Cartridge Sleeve, Wall Flange, Nipple & Spout suitable for basin including all fittings complete all as specified and directed.Make :Jaquar Cat Part No. OPP-CHR-15233NKPMM & ALD-235N, Kohler Cat Part No. K-22540IN-4ND-CP, Hindware Cat Part No F570029CP, CERA Cat No F1023474 and F4065103 |
| 37 | S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 x 440 mm white with \\"p\\"or \\"S\\" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed. |
| 38 | S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, dual tank , syphonic action type, white with inlet ball valve float and handle, bracket complete all as specified and directed. |
| 39 | S&F in repair ABS body Health Faucet including flexible pipe of 15 mm bore and min 1.00M long with and including 15 mm bore, complete all as specified and directed. Make. Jaquar Cat Part No.ALD-CHR-573, Hindware Cat Part No. F160192CP, KOHLER Cat Part No.12927IN-CP, CERA Cat Part No. F8030107AB |
| 40 | S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed. Make. Jaquar Cat Part No ACN-1151N, Kohler Cat Part No 5633IN, Hindware Cat Part No F880003CP, CERA Cat Part No.F5004110 |
| 41 | S&F in repair Vitreous China wash basin with pedestal white, flat back, size 550 x 400mm including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. Make. Cera Cat Part No.S2040157 Pedestal Cat Part No S2090101, Hindware Cat Part No-10054 Pedestal-11018, Jaquar Cat Part No. CNS-WHT-811 Pedestal CNS-WHT-303 |
| 42 | S&F 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC sheet building board or commercial plywood with aluminium beading alround and fixed with steel screw, complete all as specified and directed. |
| 43 | S&F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed. |
| 44 | S&F in repair 18/20mm thick granite shelf assembly consisting of shelf 12 cm wide and 60 cm long, complete all as specified and directed. |
| 45 | S&F in repair 6 mm thick glass corner shelf fancy type with railing and fitting complete of size 25cm x 25 cm of best quality (as per sample approved by Engr -in-charge), complete all as specified and directed. |
| 46 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughened glass with CP railing fixed with screws fancy type, complete all as specified and directed. |
| 47 | S&F in repair 3 in 1 concealed single lever shower mixer, Shower System, 300mm Shower with arm, hand shower 1m to 1.2m connection and one spout with 10 layer surface finished, Shower System owns a modern and stylish look . Excellent plating technology prevents the coating from falling off, after a long time use still keep the surface smooth and clean will all connected items, complete all as specified & directed. Make.Jaquar Cat No. ORP-10125PM, Hindware Cat Part No.F570022CP, KOHLER Part No.K-98754IN-4-CP, Cera Cat Part No.F1015403-2891 |
| 48 | S&F in repair Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions, complete all as specified and directed. Make. Jaquar Cat Part No.ARI-39309, Kohler Cat Part No 20591 IN-CP, Cera Cat Part No F1015501, Hindware Cat Part No.F280020 |
| 49 | S&F in repair Bib tab (spout) while with wall flange, complete all as specified and directed. Make.Jaquar Cat Part No OPP-15037PM, Hindware Cat Part No F340004CP, KOHLER Cat Part No : K-16093IN-4-CP, Cera Cat No F1013151 |
| 50 | S&F in repair CP 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. Make: Jaquar CAT Part No: FLRCHR-5047N, Cera CAT Part No: F-2008152, Hindware CAT Part No. F460003 & Kohler CAT Part No K-16093IN-4-CP |
| 51 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. Make.Jaquar Cat Part No: ACN-CHR-1131N, Cera Cat Part No: F5007106, Hindware Cat Part No. 880011GRT |
| 52 | S&F in repair Angular Stop Cock with wall flange while, complete all as specified and directed. Make : Jaquar Cat Part No OPP-CHR-15053PM, Hindware Cat Part No F570043CP, KOHLER Cat No 11568IN-7BCP, Cera Cat Part No F1015201 |
| 53 | S&F in repair Good quality Connection pipe (PVC) 15 mm dia and 450/600mm long, complete all as specified and directed. |
| 54 | S&F in repair stainless steel plate rack of size 60x60x25cm made with 1.0mm thick sheet including taking out existing plate rack, complete all as specified and directed |
| 55 | S&F in repair fancy type stainless steel towel rack size 600mm x 300mm including a pair of brass bracket, complete all as specified and directed. Make: KOHLER Cat Part No : K-25066IN-CP, Jaquar Cat Part No ACN-1181S, Hindware Cat Part No F580008CP, Cera Cat Part No F5003101 |
| 56 | S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including a pair of CP brass bracket, complete all as specified and directed. Make. Jaquar Cat part No CPA-1121RD, Cera Cat Part No F5001105, Hindware Cat Part No F880007, Please Enable Macros to View BoQ information |
| 57 | S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including a pair of CP brass bracket, complete all as specified and directed. Make. Jaquar Cat part No CPA-1121RD, Cera Cat Part No F5001105, Hindware Cat Part No F880007, Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender