Tender For Special Repair To Offrs Accommodation Building No P-442 And Servant Qtr Bldg No P-443 & P-444 At Vsd (Cvd) Under Cicg Offrs Mess Under Ge (West) Delhi Cantt-10
Tender Value
36.86 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
9 days left
EMD
73720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Offrs Accommodation Building No P-442 And Servant Qtr Bldg No P-443 & P-444 At Vsd (Cvd) Under Cicg Offrs Mess Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles or terracing tiles single layer on roof , mumty and removal of debrish beyond MOD land complete all as specified and directed |
| 2 | Demolition of mud phuska on roof slabs, any thickness including cleaning of roof surfaces and removing the debris upto the distance exc 1.00 Km but not n.exc 1. 5 Km complete all as specified and directed. |
| 3 | M&L for wire brushing and cleaning top surface of existing roof surface, and including taking down old APP membrane flashings and junction of parapets, etc. complete all as sepcified and directed. |
| 4 | M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed |
| 5 | M&L for 10mm thick screed bed in cement mortar 1:4 with water proofing liquid as per manufacturer instructions when concrete is a still green etc complete alll as specified and directed.(Note:- Water proofing liquid shall be measured and separately) |
| 6 | M&L for applying a coat of bitumen primer confirming @0.50 ltr/ Sqm on prepared surface of plaster and applying a coat of hot blown bitumen 85/25 gde @1.2 kg/sqm and applying APP based Polymeric membrane minimum weighting 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt.not less than 150 grm/ sqm) and sealing joints by torched application complete all as specified and as directed. (Note: Work be done through approved applicator only) |
| 7 | Supply and fixing Heat Resistant cement based Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. complete all as specified and as directed. |
| 8 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 9 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, including dismantling water tank complete all as specified and directed. |
| 10 | S&F 1000 ltrs capacity rotational molded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, including dismantling water tank complete all as specified and directed. |
| 11 | Taking up or down 15 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store, complete all as specfied & directed. |
| 12 | S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor including taking down complete in all respect as specified. |
| 13 | Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store, complete all as specfied & directed. |
| 14 | S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor including taking down complete in all respect as specified. |
| 15 | Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed. |
| 16 | Taking down door/window/ventilator frames with shutters exc 1.50 sqm but not exc 4.00 sqm each.(without taking off shutters from frame) complete all as specified and directed. |
| 17 | Taking down shutter of any description n exc 1sqm each complete all as specified and directed. |
| 18 | M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 19 | M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company. |
| 20 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as per specified and directed. |
| 21 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. |
| 22 | S & F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. |
| 23 | S & F of chrome plated telescopic channel size 450mmx20mmx1.5mm with necessary fixing clips etc. complete all as per specified and directed. |
| 24 | S&F in opening Solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II) complete all as specified and directed. |
| 25 | S & F Solid panel PVC door shutter (Factory made) 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded prelam PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail, bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and provision of partially louvred frames, Supply & Fixing in the frame at site, complete all as per specifications & as per drawing on Sl page 146 of SSR (Part-II) complete all as specified and directed. |
| 26 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as dierected. |
| 27 | S & F 35 mm thick hardwood glazed and skelton shutters, open rebated & prepared to receive glass ,gauge etc. (with or without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified complete all as specified and directed. |
| 28 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F flush shutter 35mm thick solid core construction with block board core and plywood face panels,comercial type on both sides complete all as specified and directed. |
| 30 | M&L Mild steel frame work as in door chowkhats with angle iron welded toghether ends of angle shouldered and fixed to opening, confirming to Fe-410-W (Gde-E-250) quality 'B' complete all as specified and directed. |
| 31 | S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and directed. |
| 32 | S&F 100 mm long Butt hinges medium weight cold rolled miled steel, and fixed as specified. |
| 33 | S&F 150 mm long extruded aluminum alloy handles, febricated typed, anodised complete all as specified and directed. |
| 34 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 35 | S&F 100mm Aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as direcetd. |
| 36 | S&F Aluminium door single leaf with powder coated aluminium frame of section 62.5x37x1.5mm thick, shutter with bottom & middle rail of section 112.50x 37x1.5mm thick and styles & top rail of section 83x37x1.5mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5mm thick frosted glass including necessary fittings, fixtures & aluminium snap beads, complete all as specified and directed. |
| 37 | S&F anodised aluminium ventilator with aluminium anodised frame of aluminium section 62.50 mm x 37 mm x 1.5mm thick and with top hung shutter having style and rails of aluminium section 47.62 mm x 44.45 mm x 1.5 mm thick and shutter wire gauzed and bottom half portion of shutter fixed type and glazed glass pane without sash bars including necessary joining cleats,glazing clips,rubber packing, anodized, aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long, handles and 100mm long SS hinges etc complete all as specified and directed. |
| 38 | S&F powder coated aluminum sliding windows three track section (size 92mm x 31075mmx 2.00mm) weight not less than 1.864 Kg/m and shutter size 14.70mmx43mm with aluminium anodised frame (chowkhat) of aluminium section 104.00mmx44.45mmx1.80mm thick and two shutter having 14.80 nn thick tinteg glass and one shutter stainless steel wire of dia 0.36 mm and average width of aperture 1.40 mm complete all as specified and directed. |
| 39 | Dismantling of asbestos cement (corrugated semi corrugated sheet & ridge in roof covering complete all as specified and directed. |
| 40 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet o.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified. |
| 41 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, Fe 410 -W(Gde-E- 250) quality- A complete all as specified and as directed. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for steel and iron work complete all as specified and as directed. |
| 43 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as direceted. |
| 44 | M&L for vitrified ceramic tiles light shade 7 to 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specfied & directed. |
| 45 | M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:4) laying floor finish including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed. |
| 46 | M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm,300X600mm and 450X600 mm 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and as directed. |
| 47 | M&L for 15mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster on brick walls etc all as specified and directed . |
| 48 | M&L for Preparation of existing surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 49 | M&L for 5mm thick rendering of ready mix plaster of approved make on soffit of Rcc slab/ceiling/beams, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster on brick walls etc and applying three coat of white wash all as directed, rubbish of the premises complete all as specified and directed. |
| 50 | M&L for preparation of old Plastered or unplastered surfaces of ceiling and applying two coat of white wash over wall care putty(where ever required) on ceiling surfaces complete all as specified and as directed. |
| 51 | M&L for applying wall care putty 1mm thick on ceiling even and fair surface complete all as specified and directed. |
| 52 | Dismantling of Loose concrete cover from celing surface/chajja (including staicase ceiling) are exc 1.50 sqm including derusting of steel reinforcement,(reinforcing the reinforcement by providing TMT steel bar of required dia welded to the existing reinforcement) preparing the surface by cleaning dirt etc, applying chemical admixture over reinforcement,provided chicken wire mesh (before applying first layer). Apply a rendering coat of cement plaster upto surface of existing thickness of concrete in CM 1:3 and second layer 10mm thick rendering in CM 1:3, three coats of whitewash to match with existing surface complete all as specified and directed.Note : Rate quoted shall be inclusive of all scaffolding, props and shuttering, chicken wire mesh, steel reinforcement, chemical admixture and other T&P etc. |
| 53 | M&L for 10mm thick rendering of ready mix plaster of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc and applying two coats of Oil Bound Distemper over a coat of primer and including 1mm thick wall care putty etc all as directed, rubbish of the premises complete all as specified and directed. |
| 54 | M & L for complete removal of existing treatment from walls applying a coat of priming plastered and other surfaces with alkali resistant primimg paint over and including wall care putty 1 mm thick and applying two coats of Oil Bound distemper with rich matt finish with roller including cleaning of OBD stains on floor/window/joinery's complete all as specified and directed. |
| 55 | Demolition of Brick /stone walling built in cement mortor including all quoins ,coping etc and removal of rubbish beyond MOD land complete all as specified and directed.. |
| 56 | M&L brick work built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specificed and directed. |
| 57 | M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10cm girth including preparation of surfaces complete all as specified and directed. |
| 58 | M&L painting two coats of synthetic enamel paints over a coat of pink primer on new wooden surfaces of girth exc 10CM, including preparation of surfaces. complete all as specified and directed. |
| 59 | Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed. |
| 60 | M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed. |
| 61 | M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 62 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of old paver block or stone slab laid dry complete all as specified and as directed. |
| 63 | M&L for 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 64 | M&L for Coloured Machine pressed cement concrete chequered tiles 30cm X 30cm X 20mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over and including demolition of old chequered tiles all as specified and as directed. |
| 65 | S&F in repair vitreous pedestal pattern (European type) water closet pan white with cast iron \\"P\\" or 'S\\" trap 100mm including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and as directed. |
| 66 | S&F in repair stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm complete all as specificed and directed. |
| 67 | S&F in repairs stainless steel sink of thickness of sheet not less than 0.8mm for kitchen or loboaratory with plug, washer and wastes, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX160mm complete all as specified and directed. |
| 68 | S&F in repairs Vitreous China wash hand basin including pedestal, white, flat back, size 550X400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | S&F 32mm dia CP waste coupling and 32mm dia flexible waste pipe 1.20 m long suitable for wash hand basin and sink complete all as specified and directed. |
| 70 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 71 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 72 | S&F in repair Vitreous China urinals, Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including PVC Connection 15mm size 450mm length complete all as specified and as directed. |
| 73 | S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified. |
| 74 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 75 | S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 76 | S&F in repair 15mm bore bib taps chromium plated fancy type cast copper, screwed down, screwed for iron pipe or for brass ferrule & fixed for GI pipe including complete all as specified and directed. |
| 77 | S&F in repair Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 78 | S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed. |
| 79 | S&F in repairs 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 80 | M&L looking mirror size 600x450mm bevelled edge mirror of selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer complete all as specified and directed. |
| 81 | S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete all as specified and directed. |
| 82 | S&F CP soap dish fixed to wall with brass screw complete all as specified and directed. |
| 83 | S&F tubular towel rails 20mm dia, D type 60cm long between flanges of brass chromium plated. |
| 84 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and directed. |
| 85 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and directed. |
| 86 | S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 87 | S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed. |
| 88 | S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed. |
| 89 | S&F 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed. |
| 90 | S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed. |
| 91 | S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed. |
| 92 | S&F 75 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed. |
| 93 | M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggre) as in bed blocks for gola, hold fast, roof padding/flooring, coping bedding rounded or chamfered and similar work etc., complete all as specified and directed. |
| 94 | Demolition of reinforced cement concrete as in Chajja, RCC parapet, Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 95 | M&L Formwork to soffits of suspended slabs such as kitchen slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concerete all as specified and directed. |
| 96 | M&L for reinforced cement concrete Nominal Mix using type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items) |
| 97 | M&L for mild steel TMT bars upto 10mm dia and over cut to length,bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 98 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar |
| 99 | M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 100 | PMM repairs (FOR PATCH REPAIRS):-PMM repairs shall be done as per following methodology i) Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed, which enable their rust removal vides item ii) below, from slabs, beams, and columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-incharge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads. ii) ) Rust removal by Providing and applying Fosroc Reebaklens RR or equivalnet from SIKA/ BASF, a combination of acid based material, corrosion inhibitors and dispersing agents rust remover, for removal of all rust/ scales/corrosion from reinforcement bars before microconcreting or patch repair,It Shall be applied with brush for complete wetting of rusted metal surface at coverage of 2- 2.5 Sqm/ltr. & allow it to react for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal /steel for about 5-7 days. Before applying any protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.iii) Anticorrosive treatment by Providing and applying Nitozinc Primer an epoxy based zinc rich anti corrosive primer having adhesive bond strength ≥ 1.5 MPa as per ASTM D4541, & shall comply to per ASTM B-117 to be applied on well cleaned, fully exposed and all loose scale , rust free surface obtained by grit blasting or suitable means , to be done with coverage @4.5sqm/litres to achieve a minimum thickness of 40microns DFT or as per direction of Engineer-In charge. |
| 101 | iv) Epoxy bonding for Old concrete & New concrete by providing and applying bond coat on the prepared surface with two component epoxy based bonding coat Nitobond EP of Fosroc make or equivalent, having specific gravity 1.15 to 1.2 gm/cc, Compressive strength(BS 6319 Pt.2)- 50 Mpa at 7 days, Flexural strength strength(BS 6319 Pt.3)- 35 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 20 Mpa at 7 days, Shear Strength (BS 6319 Pt.4)- 10 Mpa at 7 days, having an over lay time of 6 hrs and 30 ̊C. Bonding agent shall have coverage not less than 2.5sqm/litresLaying of reinstatement polymer modified mortar or micro concrete shall be completed within the overlay time of bonding coat. Item rate is inclusive of materials all labour, tools and tackles. complete as per specification and as directed by Engg.-in-charge.v) PMM by providing and laying single component, polymer modified, fibre reinforced cementitious repair mortar, Rendroc SP40 or equivalent from SIKA/BASF over the tacky bond coat, that achieves Compressive strength (BS 1881 Pt.116) > 20 MPa at 1 day , > 45 Mpa at 28 days, Tensile Strength > 2.5MPa, Flexural Strength > 7Mpa at 28 days, Finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, piles etc., complete in all aspect as per manufactur's methodology. Rates include cost of all labour, materials, Tools and Plants,propping, scaffolding, shuettering, safety arrangment, quality control, testing complete as per specifications and direction of engineer in charge. |
| 102 | vi) Item rates of PMM 25 mm and PMM 50 mm (against items (a) and (b) respectively ) are inclusive of all materials, labour, tools and plants, propping, scaffolding, safety arrangement, quality control, testing and all items of works from i) to v) above quality control etc. complete in all respect, as per specifications and as directed by Engg.-in-charge.Work shall be complete only after proper wet curing has been done by contractor and surface has been evaluated for satisfactory quality by sounding/tapping with a blunt metal instrument, and testing of PMM cubes filled up and cured by contractor during the application of PMM (75mm size cube crushing strength at the end of 28-day to be not less than 45 N/sqmm) in addition to NDT Testing as per under item of \\"Testing of works\\" |
| 103 | 25-30 mm average thickness ( in 2 layers) up to 3.5mtr height |
| 104 | 50-60 mm average thickness ( in 3 layers ) up to 3.5mtr height |
| 105 | S&F curtain rods of stainless steel 25mm dia with and including SS decorative finials and SS brackets suitable for SS curtain rod fixed on wall etc complete all as specified & directed. Note : -(a) Only length of SS curtain rod shall be measured and paid.(b) SS decorative finisals and brackets shall be provided for each curtain rod and rate shall be incuded with SS curtain rod. |
| 106 | Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and removal from site and making good the disturbed surfaces of (wall/floors/ceiling etc) complete all as specfied & directed. |
| 107 | M&L for concealed point wiring complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated single core copper cable FRLS as earth continuity conductor, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulators etc. all as specified and directed :- |
| 108 | (a) One light/fan/bell/Exhaust fan/Fresh Air Fan point controlled by one way switch 5 amps. |
| 109 | (b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 110 | (c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board along with other switches. |
| 111 | All as per item No 107 above but with single core copper conductor cable FLRS 2.50 sqmm for one 3 pin AC Box outlet,20 Amps concealed and including provision of 2.50 Sqmm PVC insulated single core copper conductor cable as earth continuity conductor on independent board. |
| 112 | M&L for concealed point wiring with insulated unsheathed multistranded FRLS copper conductor in non-metalic rigid PVC conduit but with single core copper conductor cable FLRS 4.0 sqmm for one 3 pin AC Box outlet 20 Amps concealed and including provision of 4.0 Sqmm single core PVC insulated copper conductor cable as earth continuity conductor on independent board.(For AC point) |
| 113 | S&F Modular switch 1 way 6A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 114 | S&F Modular switch 1 way 16A,1 module, 230V, 50 Hz complete all as specified and directed. |
| 115 | S&F Modular socket 6A- 3 pin combined 2 module,230V, 50 Hz complete all as specified and directed. |
| 116 | S&F Modular socket 6A/16A - 2/3 pin combined 2 module, 230V, 50 Hz complete all as specified and directed. |
| 117 | S&F Modular ceiling fan regulator, step type for BLDC ceiling fan 1 or 2 module. |
| 118 | S&F of switch modular type single pole Bell push 6 Amp 1 module complete all as specified and directed. |
| 119 | S&F of electric Bell ding dong AC 230 volts single pole all as specified and directed. |
| 120 | Taking down of Ceiling fan, Ceiling cable end, dismantling blades and removing fan and blades and deposit to the MES store yard complete all as specified and directed. |
| 121 | S&F ceiling fans complete with blades, down rod, regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 122 | Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the disturbed surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including taking down existing old wire all as specified and directed. Note :- Two runs of IC x 6.00 sqmm (Phase wire and neutral ) and one run of IC x 6.00 sqmm (as earth wire) will be measured as one unit length. |
| 123 | S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 including taking down old DBs all as specified.NOTE :-(a) MCBs/MCCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 124 | S&F of MCCB 100 Amp 4 pole 16 KA at 415 V complete all as specified directed. |
| 125 | S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 10 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 all as specified and directed.NOTE :-(a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 126 | S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and directed. |
| 127 | S&F in replacement MCB SPN 40 Amps rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 128 | S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and directed. |
| 129 | S&F in repair surface mounting LED Batten 20W LED light. Fixture should have minimum efficacy at system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,CCT 4000-6500K & CRI>80, PF≥0.90. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed. |
| 130 | S&F of LED light fitting 1x10W, 220V, AC decorative box type with driver, holder, fixture should have minimum efficacy at system level >=100 lumens/Watt, CCT 4000-6500K ,PF>0.90 including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 131 | S&F of 35 watts 230 V AC outdoor type with High efficient LED Building security light fitting with high pressure die cast Aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP: 65/66 protected complete with bracket made out of 32 mm GI pipe light grade 1.2 mtr long bend to shape with clamps and fixing bolts all as specified and directed. |
| 132 | Taking down carefully exhaust fan any type and deposit to MES store yard with all connected accessories after disconnecting all connections including cutting and making proper smooth round hole suitable for fixing exhaust fan 300 mm sweep dia and refixing the same on site carefully complete all as specified and directed. |
| 133 | S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 134 | S&F of Fresh Air Fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep, single phase,including cutting of holes in wall/windows for fixing the fresh air fan complete all as specified and directed. |
| 135 | M&L for Decorative wall light fitting made up of Polycarbonate,B-22 complete all as specified and directed. |
| 136 | S&F of Lamp holder,PVC/Polycarbonte type with back plate suitable for batten fitting with connections complete all as specified and directed. |
| 137 | S&F LED Lamp of wattage 09 Watt, 90 lm/W, with PF >0.9 & CRI:80,protection againt high voltage upto 360 V, B22 ,230 Volts,50 Hz,6500K complete all as specified and directed. |
| 138 | S&F of 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP 65 Protection, System level efficacy of the Luminary is =>90 lm/W, Power Factor =>0.90, Colour Temperature 3000K-6500K, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 139 | S&F of ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. |
| 140 | M&L for modular AC Box with 20A SP mini MCB, plastic enclosure & unbreakable Heavy Duty ISI mark Plug top complete for AC & geyser point set dully concealed in wall complete all as specified and directed. |
| 141 | S&F electric water heater,storage type ABS/metal body with glass lined tank with anti scaling type and heating element upto 2 KW, capacity 25 litre,vertical, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, Temperature control adjustable Knob,suitable size of fastner and incl provision ss braided pipe of size 15mmx600mm long with adopter for inlet and outlet water connection suitable for hot and cold water etc.complete all as specified and as directed. |
| 142 | M&L in replacement of earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI earth lead wire 4.0 mm as earthing leads by means of bolts, nuts, check nuts and washers all joints as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1 chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed at site. |
| 143 | Taking down carefully electric meter and deposit to MES store yard with all connected accessories after disconnecting all connections all as specfied and directed. |
| 144 | S&F single phase electronic energy meter temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as secified and directed. |
| 145 | S&F in repair, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC armoured, PVC sheathed 6 sq mm nominal cross section, 2 core complete all as secified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender