Tender For Construction Of Phc Level-Ii At Kota Pab, Tehsil Kamrau , District Sirmour ( Hp ) ( Sh:- Construction Of Building Portion , Providing Water Suuply Sanitary Installation, Construction Septic Tank With Soak Pit, Rain Water Harvesting Tank &
Tender Value
52.74 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
4 days left
EMD
1.05 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Phc Level-Ii At Kota Pab, Tehsil Kamrau , District Sirmour ( Hp ) ( Sh:- Construction Of Building Portion , Providing Water Suuply Sanitary Installation, Construction Septic Tank With Soak Pit, Rain Water Harvesting Tank & Site Development I.E. Site Leveling Along With Retaining Wall ( Estimate Based On As Per Drawing No. 298,299 & 300 Pertain Job No. 3390 )..
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work in hilly area all heights & depths, in all kind of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by mechanical means shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiselling & wedging out rock ( where mechanical work is prohibited ). All earth work in cutting/excavation, including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevation and level as shown on the drawing or as directed by the Engineer-in-Charge , in conformity with the requirement of technical specification for Rural Road, August, 2004 and clause 16.2 of General Conditions for Contract to achieve designed formation width including hauling & stacking of materials useful for construction at suitable sites & safe disposal of unsuitable cut materials in specified manner including arrangement of dumping site, trimming, filling of unevenness, blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-Charge for smooth riding including all leads and lifts. Any loss to the public & private property during the course of excavation shall be absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. |
| 2 | Excavation work by mechanbical means (Hydraulic excavator) / manual means in foundation trenches or drains ( Not exceeding 1.50 meter in width or 10 square metres on plan ), including dressing of sides & ramming of bottoms, lift upto 1.50 metre, including getting out the excavated soil & disposal of surplus excavated soil as directed, within all lead & lifts Ordinary rock ( As per code No. 2.9.1 page 65 ) |
| 3 | Supplying & filling in plinth with sand under floors, including watering,ramming,consolidating & dressing complete, including all leads, lifts & carriage of materials & to entire satisfaction of the Engineer-in-Charge. ( As per code No. 2.27 page 68 ) |
| 4 | Stone/ boulder filling behind retaining wall/ under flooring, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 6.3.1 Page 94 ) |
| 5 | Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering-All work upto plinth level in cement concrete 1 : 4 : 8 (One cement : four coarse sand : eight graded stone aggregate 40 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 4.1.8 Page 73 ) |
| 6 | Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering-All work upto plinth level in cement concrete 1 : 5 : 10 ( One cement : five coarse sand : ten graded stone aggregate 40 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 4.1.10 Page 73 ) |
| 7 | Providing & laying cement concrete in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapet coping, bed blocks, anchor blocks, plain window sills, fillets, Sunken floor etc., upto floor five level, excluding the cost of centring, shuttering & finishing 1 : 1.5 : 3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 4.2.2 Page 73 ) |
| 8 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 ( One cement : three coarse sand ( Zone-III ) : six graded stone aggregate 20 mm nominal size ) over 75 mm thick bed of dry brick ballast 40mm nominal size, well rammed & consolidated & grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 4.17 Page 76 ) |
| 9 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing & reinforcement-All work upto plinth level in 1 : 1.5 : 3 ( One cement: one & half coarse sand : three graded stone aggregate 20 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 5.1.2 Page 79 ) |
| 10 | Reinforced cement concrete work in walls (any thickness) , including attached pilasters,buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts etc. above plinth level upto floor five level, excluding cost of centring, shuttering, finishing & reinforcement in 1:1.5:3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm nominal size ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 5.2.2 Page 79 ) |
| 11 | Reinforced cement concrete in beams, suspended floors, roofs having slope upto 15 degree landing, balconies, shelves, Chajjas,Lintels, bands, plain windows sills, staircases & spiral cases above plinth level upto floor five level, excluding cost of centring, shuttering, finishing & reinforcement in 1:1.5:3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm nominal size ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 5.3 Page 79 ) |
| 12 | Centring & shuttering including strutting, propping etc. & removal of form work for :- Foundations, footing, bases of columns, etc. for mass concrete, including all leads, lifts and carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.1 page 80 ) |
| 13 | Suspended floors, roofs, landings, balconies & access platform, including all leads, lifts and carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.3 page 80 ) |
| 14 | Lintels, beams, plinth beams, girders, bressumers & cantilevers, including all leads, lifts and carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.5 page 80 ) |
| 15 | Columns, pillars, piers, Abutments, posts & struts, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.6 page 80 ) |
| 16 | Stairs, ( excluding landings ) except spiral staircases, including all leads & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.7 page 80 ) |
| 17 | Edges of slabs & breaks in floors & wall under 20cm wide, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.9.16.1 page 81 ) |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position & binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-500 D or more, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 5.22.6 page 84 ) |
| 19 | Rat trap bond brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 in foundation & plinth in cement mortar 1 : 6 ( One cement : Six coarse sand ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( Based as on as per code No. 6.2.2 Page 94 ) |
| 20 | Rat trap bond brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 in Super-structure above plinth level upto floor V level in cement mortar 1 : 6 ( One cement : six coarse sand ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( Based on as per code No. 6.4.2 Page 94 ) |
| 21 | Brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 in foundation & plinth in cement mortar 1 : 6 ( One cement : Six coarse sand ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 6.1.2 Page 94 ) |
| 22 | Brick work with common burnt clay F.P.S. ( Non-modular ) bricks of class designation 7.5 in supertstructure above plinth upto floor V level in all shapes and size in cement mortar 1 : 6 ( One cement : Six coarse sand ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 6.3.1 Page 94 ) |
| 23 | Half brick masonry with common burnt clay F.P.S. ( Non modular ) brick of class designation 7.5 in foundation & plinth in cement mortar 1 : 4 ( One cement : four coarse sand ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 6.12.2 Page 95 ) |
| 24 | Cement concrete flooring 1 : 2 : 4 ( One cement : tw coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20 mm nominal size stone aggregate , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.3.1 Page 160 ) |
| 25 | Half brick masonry with common burnt clay F.P.S. ( Non modular ) brick of class designation 7.5 in Super-structure above plinth level upto floor V level in cement mortar 1 : 4 ( One cement : four coarse sand ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 6.3.1 Page 94 ) |
| 26 | Providing & fixing 18 mm thick gang saw cut, mirror polished, premoulded & prepolished, machnine cut for Kitchen plateforms, vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm thick base cement mortar 1 : 4 ( One cement : four coarse sand), joints treated with wihte cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high gloss finish etc. complete at all level Granite of any colour & shade area of slab over 0.50 square metre , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 8.2.2.2 page 105 ) |
| 27 | Providing & fixing Ist quality Ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacture ) , of approved make in all clours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps & dados, over 12 mm thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry @ 3.3 Kilograme per Square meters, including pointing in white cement mixed with pigment of matching shade complete , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 8.31 Page 111 ) |
| 28 | Providing & fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood & well matched commerical ply veneering with vertical grains of cross bands & face veneers on both face of shutter covered with 3 mm thick plastic sheet upto 100 centimetre height from bottom ( from inside only ) 35 mm thick including black enamelled mild steel butt hinges, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( Analysis of rate based on HPSR item code No. 120100000 & No. 12010020000 Page 206 ) |
| 29 | Providing & fixing wire gauge shutters using galvanised mild steel wire of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows & clerestory windows with hinges & necessary screws 35 mm thick kiln seasoned & chemically treated hollok wood , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. No. 9.27.1.1.2 Page 120 ) |
| 30 | Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coaat on unexposed surface etc. complete 2nd class teak wood 50 x 12 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 9.40.1.1 Page 121 ) |
| 31 | Providing & fixing mild steel grills of required pattern in frames of steel/ windows etc. with mild steel flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel windows by welding , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 9.48.1 Page 122 ) |
| 32 | Providing & fixing cub board shutters 19 mm thick with pre-laminated flat pressed three layers particle board or graded wood particle board IS: 12823 marked, exterior grade ( Grade I type II ), having one side decorative lamination & other side balancing lamination, including 2nd class teak wood lipping of 25 mm wide 12 mm thick with necessary screws & bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per analysis of rate attached ) |
| 33 | Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss /matt/ Suede finish with high density protective surface layer & reverse side of adhesive bonding quality conforming to IS: 2046 Type-S, including cost of adhesive of approved quality 1.00 thick sheet , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.127.2 Page 139 ) |
| 34 | Providing & fixing 19 mm thick water proof commercial board in shelves/box for Cub board with butt joints & fixing with nails & screws etc. complete , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per analysis of rate attached ) |
| 35 | Providing & fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (Type-1 ), for plain lining/ cladding with necessary screws, including priming coat on unexposed surface with decorative veneer facing of approved manufacture , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 8.28.1 Page 111 ) |
| 36 | Providing & fixing special quality bright finished brass cub board or ward robe locks with four levers of approved quality including necessary screws etc. complete 50 mm size , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.80 Page 127 ) |
| 37 | Providing & fixing 50mm bright finished brass cub board or ward robe knob of approved quality with necessary screws , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.79.2 Page 127 ) |
| 38 | Providing & fixing magetic catcher of approved quality in Cub board/ward robe shutters, including fixing with necessary screws etc. complete double trip ( horizontal type ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.114.2 Page 133 ) |
| 39 | Providing & fixing expandable fasterners of specified size with necessary plastic sleeves & galvanised mild steel screws including drilling holes in masonry work/ cement concrete/ reinforced cement concrete & making good etc. complete 40 mm long , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 8.24.3 Page 110 ) |
| 40 | Providing & fixing aluminium sliding door bolts, ISI marked anodized ( anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade,with nuts & screws etc. complete 300 x 16 mm size , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.96.1 Page 129 ) |
| 41 | Providing & fixing aluminium sliding door bolts, ISI marked anodized ( anodic coating not less than grade AC 10 as per IS:1868),transparent or dyed to required colour or shade,with nuts & screws etc. complete 250 x 16 mm size , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.96.2 Page 129 ) |
| 42 | Providing & fixing aluminium tower bolts, ISI marked, anodized ( Anodic coating not less than grade AC 10 AC 10 as per IS : 1868 ) transparent or dyed to reuired colour or shade, with necessary screws etc. complete 200 x 10 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.97.3 Page 129 ) |
| 43 | Providing & fixing aluminium tower bolts, ISI marked, anodized ( Anodic coating not less than grade AC 10 AC 10 as per IS : 1868 ) transparent or dyed to reuired colour or shade, with necessary screws etc. complete 100 x 10 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.97.5 Page 129 ) |
| 44 | Providing & fixing aluminium handles, ISI marked, anodized ( Anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to reuired colour or shade, with necessary screws etc. complete 125 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.100.1 Page 130 ) |
| 45 | Providing & fixing aluminium handles, ISI marked, anodized ( Anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to reuired colour or shade, with necessary screws etc. complete 75 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.100.3 Page 130 ) |
| 46 | Providing & fixing aluminium hanging floor door stopper,ISI marked, anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.101.1 Page 130 ) |
| 47 | Providing & fixing aluminium hanging floor door stopper, ISI marked, anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Twin rubber stopper , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.101.2 Page 130 ) |
| 48 | Providing & fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kilogram door with upto 700mm with necessary accessories & screws etc. complete , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.83 Page 127 ) |
| 49 | Providing & fixing ISI marked oxidized mild steel tower bolt black finish, ( Barrel type ) with necessary scerews etc. complete 100 x 10 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.63.4 Page 125 ) |
| 50 | Providing & fixing ISI marked mild steel handles conforming to IS: 4992 with necessary screws etc. complete 100 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 9.66.2 Page 125 ) |
| 51 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bar, ladder, railing, brackets, gates & similar work , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 10.25.2 Page 163 ) |
| 52 | Providing & fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing & similar works, including applying priming coat of approved steel primer mild steel tube/pipe , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 10.26 page 163 ) |
| 53 | Providing & fixing fly proof wire gauge to windows, clerestory windows & doors with mild steel flat 15 x 3 mm & nuts & bolts complete, Galvanised mild steel wire gauge with 0.63 mm dia wire & 1.4 mm aperture on both sides , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 10.29 Page 164 ) |
| 54 | Providing & fixing factory made ISI marked steel glazed doors, windows & ventilators, side/ top/centre hung, with beading & all members such as F7D, F4B, K11B & K12B etc. complete of standard rolled steel sections, joints mitred & flash butt welded & sash bars tenoned & riveted, including providing & fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, ( sectional weight of only steel members shall be measured for payment ) fixing with 15 x 3 mm lugs 10 cm long embedded in cement concrete block 15x10x10cm of cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20 mm nominal size ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 10.11.1 Page 160 ) |
| 55 | Providing & fixing mild steel Tubular frames for doors, windows, ventilators & cub board with rectangular/ L- type sections, made of 1.60mm thick mild steel sheet, joints mitred, welded & grinded finish, with profiles of required size, including fixing of necessary butt hinges & screws & applying a priming coat of approved steel primer. Fixing with 15 x 3 mm lugs 10 cm long embedded in cement concrete block 15x10x10cm of cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20mm nominal size ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 10.15 Page 162 ) |
| 56 | Providing & fixing glass panes with putty & glazing clips in steel doors, windows, clerestory windows, all complete with 4.00 mm thick glass panes , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 10.30 Page 164 ) |
| 57 | Automatic Vibro hydraulically compressed 300x300x25mm polished terrazo tiles ISI marked No. 1237 in 70% white, 30% grey cement ratio. The Ratio of chips shall be 55 % white & 15 % of each maroon, yellow & dark shade laid over a bed of 25mm average thickness of cement mortar 1:6 ( one cement : six coarse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing & polishing complete. The size of Chips shall be 0, B, 2 B of NTC or its equivelent. , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( Analysis based on computer code item No. 13160000 & 13160200 of HPSR 2009 ) |
| 58 | Automatic Vibro hydraulically compressed 300x300x25mm polished terrazo tiles ISI marked No. 1237 in 70% white, 30% grey cement ratio. The Ratio of chips shall be 55 % white & 15 % of each maroon, yellow & dark shade laid over a bed of 25mm average thickness of cement mortar 1:6 ( One cement : six coarse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in skirting or dedo. The size of Chips shall be 0, B, 2 B of NTC of its equivelent , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( Analysis based on computer code item No. 13190000 & 13190200 of HPSR 2009 ) |
| 59 | Providing & laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 300 x 300 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.41.1 Page 172 ) |
| 60 | Providing & laying vitrified double charge floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.41.2 Page 173 ) |
| 61 | Providing & laying vitrified double charge tiles in different sizes ( thickness to be specified by manufacturer ) , with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 : 3 (One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 Kilogram per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.46.2 Page 173 ) |
| 62 | Mirror polished Kotah stone slab flooring over 20 mm ( average ) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand ) 25 mm thick, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.26.1 Page 170 ) |
| 63 | Mirror polished Kotah stone slab 20 mm thick in risers of steps, skirting, dado & pillars laid on 12 mm ( average ) thick cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 11.27.1 Page 170 ) |
| 64 | Providing & fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion ( I ) Single socketed pipes 110 mm diameter, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 12.41.2 Page 184 ) |
| 65 | Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion bend 87.5 degree 110 mm bend , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 12.42.5.2 page 185 ) |
| 66 | Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe ( Plain ) 110 mm bend , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 12.42.6.2 Page 185 ) |
| 67 | Providing & fixing mild steel holder bat clamps of approved design to Cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ) & cost of cutting holes & making good the wall etc. 110 mm diameter PVC , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 12.38.1 Page 184 ) |
| 68 | 15 mm cement plaster on the rough side of single or half brick wall of mix in cement mortar 1 : 6 ( One cement : six fine sand ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 13.2.2 Page 196 ) . |
| 69 | 6 mm cement plaster of mix 1 : 3 ( One cement : three fine sand ) , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.16.1 Page 197 ) |
| 70 | Providing & applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even & smooth complete , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.26 Page 198 ) |
| 71 | Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.41.1 Page 200 ) |
| 72 | Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre per 10 Square metre over & including priming coat of exterior primer applied @ 2.20 Kg per 10 Square metre , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.46.1 Page 201 ) |
| 73 | Finishing with Deluxe Multi surface paint system for interior & exterior using primer as per manufactures specifications , Two or more coats applied on walls @ 1.25 litre per 10 square metres over & including one coat of special primer applied @ 0.75 litre per 10 Square metres , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.48.1 Page 201 ) |
| 74 | Finishing with Deluxe Multi surface paint system for interior & exterior using primer as per manufactures specifications painting steel work with Deluxe Multi surface paint of required shade. Two or more coats applied @ 0.90 litre per 10 Square metre over an under coat of primer applied @ 0.80 Litre per 10 Square metre of approved brand & manufacture , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 13.48.3 Page 201 ) |
| 75 | Providing & fixing water closet squatting pan ( Indian type W.C. Pan ) with 100 mm sand cast iron P or S trap, 10 litre Low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) conforming to IS: 7231, with all fittings & fixures complete including cutting & making good the walls & floors wherever required White Vitreous China Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per Code No. 17.1.1 Page 253 ) . |
| 76 | Providing & fixing white Vitreous China pedestal type water closet ( European type W.C. pan ) with seat & lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) conforming to IS: 7231, with all fittings & fixures complete including cutting and making good the walls & floors wherever required W.C. Pan with ISI marked white soild plastic seat & lid , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per Code No. 17.2.1 Page 253 ) . |
| 77 | Providing & fixing white Vitreous China flat back half stall urinal of size 630x420x390 mm with white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per IS : 2556, C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Single half stall Urinals with 5 litre P.V.C. automatic flushing cistern , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per Code No. 17.5.1 Page 254 ) . |
| 78 | Providing & fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings & brackets, cutting & making good the walls wherever require White Vitreous China Wash basin size 550 x 400 mm with single 15 mm C.P. Brass pillar tap, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per Code No. 17.7.2 Page 255 ) . |
| 79 | Providing & fixing white Vitreous China Pedestal for wash basin completely recessed at the back for the reception of pipes & fitting , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 80 | Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink with drain board 460 x 385mm bowl depth 200 mm , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per analysis of rate attached ) . |
| 81 | Providing & fixing white vitreous China Laboratory sink with Cast iron brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste & 40 mm C.P. brass trap with necessary C.P. brass unions complete, including paintingh of fittings & brackets, cutting & making good the walls wherever required size 600 x450 x 250 mm, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. ( As per code No. 17.11.2 Page 256 ) . |
| 82 | Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass ( of approved quality ), complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws & washers complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 83 | Providing & fixing 600x 120 x 5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets & guard rail completed fixed with 40 mm long screws rawl plugs etc. complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 84 | Providing & fixing Toilet paper holder C.P. brass, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 85 | Providing & fixing PTMT Liquid soap container 109 mm wide, 125 mm high & 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality & colour, weighting not less than 125 grams, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 86 | Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm long towel rail with total length of 495 mm, 78 mm wide & effective height of 88 mm, weighting not less than 170 grams , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 87 | Providing & fixing polyethelene- Aluminium Polyethelene PE-AL-PE composite pressure pipes conforming to IS: 15450,UV. Stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature upto 80 degree cess, including all special fittings of composite materials ( Engineering plastic blend & brass inserts wherever required ) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. Tjis includes testing of joints complete as per direction of the Engineer-in-Charge . Concealed work, including cutting Chases & making good the wall etc. , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. 1216 ( 16 mm OD ) pipe |
| 88 | 1620 ( 20 mm OD ) pipe |
| 89 | Providing & fixing G.I. pipes conplete with G.I. fittings & clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases & making good the walls , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. 15 mm dia nominal bore |
| 90 | 20 mm dia nominal bore |
| 91 | Providing & fixing G.I. pipes complete with G.I. fittings including tranching & refilling etc for external work 15 mm dia nominal bore, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 92 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing & fixing tee, i/c cutting & threadingthe pipe etc. complete 25 to 40 mm nominal bore , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 93 | Fixing water meter & stop cock in G.I. pipe line including cutting & threading the pipe & making long screws etc. complete ( Cost of water meter & stop cock to be paid separately ) , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 94 | Providing & placing on terrace ( at all floor levels ) polyethylene water storage tank, IS : 12701 marked, with cover & suitable locking arrangement & making necessary holes for inlet, outlet & overflow pipe but without fittings & the base supports for tank , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 95 | Providing & fixing C.P. brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 96 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standard & weighting not less than 690 grams 15 mm nominal size, including all leads,lifts,carriage of materials & entire satisfaction of the Engineer-in Charge ( As per code No. 18.51.1 Page 283 ) . |
| 97 | Providing & fixing C.P. brass stop cock (Concealed ) of standard design & of approved make conforming to IS: 8931 15 mm nominal bore, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 98 | Providing & fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931 15 mm nominal bore , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 99 | Providing & fixing C.P. brass extension nipple ( Size 15 mm x 50 mm ) of approved make and quality as per direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 100 | Constructing brick masonry manhole in cement mortar 1 : 4 ( One cement : four coarse sand ) with R.C.C. top slab with 1 : 1.5 : 3 mix ( One cement : one & half coarse sand ( Zone-III ) : three graded stone aggregate 20 mm nominal size ) ,foundation concrete 1 : 4 : 8 mix ( One cement : four coarse sand ( Zone-III ): eight graded stone aggregate 40 mm nominal size ), inside plastering 12 mm thick with cement mortar 1 : 3 (One cement : three coarse sand) finished with floating coat of neat cement & making Channel in cement concrete 1 : 2 : 4 (One cement:two coarse sand : four graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design inside size 90 x 80 cm & 45 cm deep, including C.I. cover with frame ( Light duty ) 455x610 mm internal dimensions total weight of cover & frame to be not less than 38 Kg ( Weight of cover 23 Kg & weight of frame 15 Kg ) with common burnt clay F.P.S. ( Non modular ) bricks of class designation 7.5 , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 101 | Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150mm dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge |
| 102 | Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110mm dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge |
| 103 | Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75mm dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge |
| 104 | Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 105 | Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 106 | Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 107 | Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 150 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 108 | Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 109 | Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 110 | Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 150 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 111 | Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 112 | Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 113 | Providing & fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 150 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 114 | Providing & fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 115 | Providing & fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 116 | Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 150 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 117 | Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 100 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 118 | Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 119 | Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 150 mm dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 120 | Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 121 | Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 75 mm dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 122 | Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 150 mm x 110 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 123 | Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 110 mm x 75 mm dia , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 124 | Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 90 mm , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 125 | Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 75 mm , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 126 | Cutting holes to 30 x 30 cm in walls including making good the same with common burnt clay FPS ( Non modular ) bricks, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge |
| 127 | Providing & fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1.00 metre long with S.S. triangular plate to Eureopean type W.C. of quality & make as approved by Engineer-in-Charge , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 128 | Providing & fixing 15 mm mixer for kitchen sink with top/ bottom swining spouts , including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge. |
| 129 | Providing & fixing in position precast R.C.C. manhole cover & frame or required shape & approved quality LD-2.5 rectangular shape 600 x 450 mm internal dimensions , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 19.19.1.1 page 307 ) . |
| 130 | Providing & fixing in position precast R.C.C. manhole cover & frame or required shape & approved quality LD-2.5 Square shape 450 mm internal dimensions, including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 19.19.1.2 Page 307 ) . |
| 131 | Supplying & filling bricks bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm nominal size ), including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 286 Page 8 ) |
| 132 | Supplying & filling in plinth with sand under floors, including watering,ramming,consolidating & dressing complete,including all leads, lifts & carriage of materials & to entire satisfaction of the Engineer-in-Charge. ( As per code No. 2.27 page 68 ) |
| 133 | Providing & fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, ( i ) Single socketed pipes 75 mm diameter , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge. ( As per code No. 12.41.1 Page 184 ) |
| 134 | Providing & fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5 degree 75 mm bend , including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.( As per code No. 12.42.6.2 Page 185 ) . |
| 135 | Providing weep holes in brick/ stone masonry, plain/ reinforced concrete abutment, wing wall return walls with 100 mm dia PVC pipe extended through the full width of the structure with slope of 1 ( V ) : 20 (H) towards drawing face complete as per drawing & technical specification clause 614,709,1204, 3.7 including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender