Tender For Design Proposal Leisure Valley, Sector 10, Chandigarh Landscaping, Civil Work
Tender Value
1.41 Crore
Estimated cost
Bid Submission
12 Aug 2026
7 days left
EMD
2.82 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design Proposal Leisure Valley, Sector 10, Chandigarh Landscaping, Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). as per direction of Engineer-in-charge. (DSR 15.2.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR 4.1.2) |
| 4 | Centring and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls: Under 20 cm wide (Based on DSR 5.9.16.1) |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR 15.60) |
| 6 | Providing and fixing PCC kerbs of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes the cost of filling and pointing of joints between kerbs with cement mortar 1:4 (1 cement 4 course sand) Complete in all respect to the entire satisfaction of Engineer In Charge. |
| 7 | Chipping or scraping and clearing upto 50mm depth of existing cement concrete pavement after cutting 10mm wide groove on two sides with average depth upto 50mm with blade & mechnical rotor in cement concrete pavement / paver / tile including arrangement of electricity generator for running of rotor machine, complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 8 | Providing and fixing coloured ceramic (Tactile) tile, ground surface indicators of size 300x 300mm of approved make for guiding/direction/warning to the visually impaired visitors, in the centre/side of the pedstrain/ approach pathway as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles as per design/ specification and guidelines complete in all respect to the entire satisfaction of Engineer-in charge. Note:- The tile shall be premium quality (1st quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JONHONSONS. |
| 9 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of quired size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) (D.S.R 10.28). |
| 10 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2) |
| 11 | Renewal of top layer of jogging tracks for material after scrapping 1\\"-1 1/2\\" depth and filling 4\\" thick cinder and clay mix (top layer of cinder i.e. 80% and 20% of clay) on entire area and watering and compacted of new layer complete in all respect. |
| 12 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and remming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within lead of 50m. All kinds of soil (DSR 2.8.1-2.36) |
| 13 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses (DSR 2.6.1-2.36) |
| 14 | Carriage of earth by mechanical transport including loading, unloading Lead of 2 km complete in all respect to the entire satisfaction of the Engineer-In-Charge. |
| 15 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 7.2.1) |
| 16 | Providing and laying sand filling/ watering, ramming consolidation and dressing complete including loading unloading and carriage of material from C&D plant to site complete in all respect as per the directions of Enginner-In-Charge. |
| 17 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 18 | 15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1) |
| 19 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (DSR 11.26.1) |
| 20 | Providing and laying 60mm thick high density factory made cement Concrete interlocking paver blocks of M-30 grade made by rubber mould table type platform and of approved size and design /shape laid in required colour and pattern over and including 20mm Cement Mortar 1:3 complete as per the directions of Engineer-In-Charge. |
| 21 | Providing,laying & consolidation of 40 mm stone aggregate (Gol Bajari) by manually means, consolidating to 90% of Standard Proctor Density levelling to required level, including rolling & curing etc. all complete to the entire satisfaction of Engineer-in-Charge. |
| 22 | Providing and fixing aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other section of approved make confirming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners inclusding necessary filling up of gaps at juctions, at top, bottom and sides with required PVC neoprene fell etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed machanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling C.P bass/stainless steel screws. all complete as per architectural drawings and the derection of Engineer-In-Charge. (Glazing and panelling to be paid for separately) for fixed portion: - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC15) For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2). |
| 23 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. DSR 12.1.1 |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.( DSR 5.22.6) |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) (DSR 5.1.2) |
| 26 | Centring and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete (DSR 5.9.1) |
| 27 | Providing and fixing a permanent display information board made of durable material such as Random rubble masonry with hard stone side supports with a central display panel complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 28 | Providing and fixing milestone of RCC having minimum dimensions (Length)1'-10\\"x(Width)1'-0\\"x(Height)1'-4\\" including painting and writng along with fixing in position with cement concrete . the rate include carriage of bench from shop to site and fixing in position with cement concrete to entire satisfaction e-i-c. |
| 29 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished ,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 sqm (DSR 8.2.2.1) |
| 30 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals,oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (DSR 16.62) |
| 31 | Manufacturing, supplying P/F Parking Areas information sign boards for person with disabilities as per IRC 67 2022 have rectangular shape of size 600 x 100 mm and the definition plate of size 600mm x 200mm both made out of 3mm thick ACP Sheet, fixed to back support frames of size of angle iron 25x25x3mm. The front side of both aluminium plate shall be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc Shall be screen printed. as per IRC : 67 2022, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets to back support frame of M.S. angle iron along with theft resistant measures, mounted and fixed with welding/ nut anb bolts to 3100 mm long vertical post made of M.S. Angle section having size 60mm x 60mm x 6mm @ 4.5 kg/mtr having anchorage piece made out of same angle of size 250mm long embedded in ground with cement concrete 1:2:4 block size 300 x 300 x 450mm. The steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of of zinc chromate yellow primer (vertical MS support to be painted in black and white colours). |
| 32 | Providing & Fixing of informatory Sign Board of size 100 x 600mm (Pedestal Type) made of 2.8mm Acrylic sheet with desired text in three languages duly UV printed. The Braille should be Grade 2/1 , to be raised 0.5mm above base plate. The complete signage shall be installed at site as the directions of Engineer-in-charge. |
| 33 | Providing and fixing 2 seater along with physical handicap space in between 2 seating space and 3 back raised bench should be fixed on 2 No column on 2 seating . The rate include carriage of bench from shop to site and fixing in position with cement concrete to entire satisfaction e-i-c. |
| 34 | Writing and painting of directional guide sign for pedestal movement and general publicon existing RCC artistic wall painting/ mural on all plastered surface, including suraface preparation scraping of loose paint, cleaning, minor surface repairs, and repainting complete in all respect to the entire satisfaction of Engineer In-Charge |
| 35 | Providing and fixing metallic fabric consisting of 2\\"x2\\"x4mm size chain linked fencing of M.S wire duly welded or bolted over existing steel frame including sandwiching of chain link between M.S Angle, MS Flat complete to the entire satisfaction of the engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender