Tender For Repair/ Maintenance Of Chairs & Other Furniture Accn Under Ge Ranchi
Tender Value
30 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
1 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Chairs & Other Furniture Accn Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Chair Easy Cushioned Steel (FD-121M) M&L for Removing of unserviceable/broken parts of Chair Easy cushioned without damaging of other parts of Chair easy, supply and fixing new parts as shown on drg and specified. |
| 2 | Material and labour for Repair and painting to frame of Chair Easy Coushined Steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper and providing 04 Nos PVC hard rubber shoes to leg frame of Tepoy as specified and directed by Engineer-in-Charge. Dgr No FD-121M |
| 3 | Supply and fixing in replacement of seat of Chair Easy Steel made of 12mm thick plywood MR Gde and 50mm thick cushion of 32 density - Make: Sleepwell/ Kurlon/ Coirfoam pasted on plywood and covered with leatherite fabrics/ tapestry cloth all as shown on drg and directed by Engr-in-Charge. Dgr No FD-121(M) |
| 4 | Description all as per Srl Item No. 1.02 above but back of Chair Easy Steel. Dgr No FD-121M |
| 5 | Supply and fixing in replacement of arm to chair easy steel of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint over a coat of wood primer and as per directed by Engr-in-Charge. Dgr No FD-121M |
| 6 | Bed Plywood Top (FD-246 & 247):- M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. (FD-246 & 247) |
| 7 | Long rails of size 1980 x 90 x 35mm made of 1st class hard wood teak of bed plywood top. Drg No FD-246 & 247 |
| 8 | Teak face venner ply wood 3mm thick for outer and inner sides of head board with teak wood beading half round alround of head rest of bed plywood top. Drg No FD-246 & 247 |
| 9 | All as per Srl. item No. 2.02 here-in-before but foot board. Drg No FD-246 & 247 |
| 10 | Supply and fixing in replacement of legs of size 60x60x660mm made of 1st class hard wood teak/shisham of head board of bed plywood top. Drg No FD-246 & 247 |
| 11 | All as per Srl. Item No. 2.04 here-in-before but legs of size 60 x 60 x 520mm of foot board of bed plywood top. Drg No FD-246 & 247 |
| 12 | Supply and fixing of plywood MR Gde as per IS:303, AA Type of size 1980 x 900 x 12mm thick to bed plywood top with steel screw. (Make of Plywood:- Greenply/Archidply/Century Ply/BTSP (Gold)/ Samratply. Drg No FD-246 & 247 |
| 13 | Supply and fixing in replacement of stiffners of size 60x40x900mm made of 1st class hard wood teak/shisham of bed ply top. Drg No FD-246 & 247 |
| 14 | Supply and fixing in replacement of complete head rest with legs of bed plywood top shape and size as shown on drg. Drg No FD-246 & 247 |
| 15 | All as per Srl. Item No. 2.08 here-in-before but foot rest of bed plywood top. Drg No FD-246 & 247 |
| 16 | S & F of 1st class hard wood teak/shisham wooden bracket of size 100 x 100 x 35mm machine cut with steel screw between the long rail and legs of head board and foot board of bed plywood top. Drg No FD-246 & 247 |
| 17 | M&L for applying french polishing with best quality french polish on exposed surfaces to bed plywood top (except top ply) till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. Drg No FD-246 & 247 |
| 18 | Chair dinning- M& L for Removing of unserviceable/broken parts without damaging to other parts of chair dining and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. Drg No FD-279 |
| 19 | Supply & Fix Rear leg of size 890x55x30mm. Drg No FD-279 |
| 20 | Supply & Fix Front leg of size 460x55x30mm.Drg No FD-279 |
| 21 | Supply & Fix Side/Front/Rear rails of size 440x65x30mm. Drg No FD-279 |
| 22 | Supply & Fix Back rest of size 405x45x15mm. Drg No FD-279 |
| 23 | Supply & Fix Stiffener of size 20x25mm (Side & Central one). Drg No FD-279 |
| 24 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair dining. Drg No FD-279 |
| 25 | Tightening of all parts/joints of whole Chair dining with bamboo pins. Drg No FD-279 |
| 26 | Material and labour for French polishing to chair dining after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. Drg No FD-279 |
| 27 | Removing the old cane from chair dining and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. Drg No FD-279 |
| 28 | Supply & Fix nylon buffers with machine screw to legs of chair dining complete all as directed by Engineer-in-Charge. Drg No FD-279 |
| 29 | Chair writing- M&L for removing of unserviceable/broken parts without damaging of other parts of chair writing and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. Drg No FD-280 |
| 30 | Supply & Fix Rear leg of size 890x55x30mm. Drg No FD-280 |
| 31 | Supply & Fix Front leg of size 680x55x30mm. Drg No FD-280 |
| 32 | Supply & Fix Side/Front/Rear rails of size 535 x 65x30mm. Drg No FD-280 |
| 33 | Supply & Fix Back rest of size 470x50x15mm. Drg No FD-280 |
| 34 | Supply & Fix Stiffener of size 20x25mm (Side & Central one). Drg No FD-280 |
| 35 | Supply & Fix Arms of size 520 x 60x25mm. Drg No FD-280 |
| 36 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair Writing. |
| 37 | Tightening of all parts/joints of whole Chair Writing with bamboo pins. Drg No FD-280 |
| 38 | Material and labour for French polishing to chair writing after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. Drg No FD-280 |
| 39 | Removing the old cane from chair writing and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. Drg No FD-280 |
| 40 | Supply & Fix nylon buffers with machine screw to legs of chair writing complete all as directed by Engineer-in-Charge. Drg No FD-280 |
| 41 | Chair Easy M&L for removing of unserviceable/broken parts without damaging of other parts of chair easy and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. Drg No FD-229 |
| 42 | Supply & Fix Front/Rear leg of size 545x55x25mm. Drg No FD-229 |
| 43 | Supply & Fix Front/Rear stiffener of size 510 x 50 x 25mm . Drg No FD-229 |
| 44 | Supply & Fix Arms of size 610 x 65x25mm. Drg No FD-229 |
| 45 | Supply & Fix Front & back rail of seat/back of size 510x50x25mm. Drg No FD-229 |
| 46 | Supply & Fix Side rail of seat/back of size 575 x 70 x 40mm . Drg No FD-229 |
| 47 | Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak/shisham made to shape and size complete all as specified and shown in drg and as directed by the Engineer-in-Charge. Drg No FD-229 |
| 48 | All as per Srl. Item No. 5.06 here-in-before but back frame of chair easy. Drg No FD-229 |
| 49 | Tightening of all parts/joints of entire Chair Easy with bamboo pins. Drg No FD-229 |
| 50 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair Easy. Drg No FD-229 |
| 51 | Material and labour for French polishing to chair easy after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. Drg No FD-229 |
| 52 | Removing the old cane from chair easy and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. Drg No FD-229 |
| 53 | Supply & Fix nylon buffers with machine screw to legs of chair easy complete all as directed by Engineer-in-Charge. Drg No FD-229 |
| 54 | Chair Verandah - M & L for electric welding to broken old frame including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. Drg No FD-359 & FD/MAP-II/06 |
| 55 | Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 19mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. Drg No FD-359 & FD/MAP-II/06 |
| 56 | Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as directed by Engr-in-Charge. Drg No FD-359 & FD/MAP-II/06 |
| 57 | M&L for taking down and removing the old cane /PVC seat and back from seat and back of Chair Verandah remove the old paint with emry paper and prepare the surface smooth of chair Verandah. Apply one coat synthetic enamel white paint on whole surface of Chair Verandah. Make - Asian , Burger, Nerolac. Drg No FD-359 & FD/MAP-II/06 |
| 58 | recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white/off white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. Drg No FD-359 & FD/MAP-II/06 |
| 59 | Supply & Fix nylon buffers with machine screw to legs of chair Verandah complete all as directed by Engineer-in-Charge. Drg No FD-359 & FD/MAP-II/06 |
| 60 | Stool dressing CB- M & L for Removing of unserviceable/broken parts without damaging to other parts of stool dressing CB and supply and fix following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified.(Drg No FD - 282,252) |
| 61 | Supply & Fix leg of size 490x50x25mm. Drg No FD - 282,253 |
| 62 | Supply & Fix Side rails of size 440x65x30mm Drg No FD - 282,255 |
| 63 | Supply & Fix Side rails of size 220x65x30mm. Drg No FD - 282,256 |
| 64 | Supply & Fix Stiffener of size 20x25mm (Side & Central one). Drg No FD - 282,257 |
| 65 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm machine cut of 1st class hard wood teak/shisham between legs and rails of Chair dining. Drg No FD - 282,258 |
| 66 | Tightening of all parts/joints of whole Stool dressing CB with bamboo pins. Drg No FD - 282,259 |
| 67 | Material and labour for French polishing to Stool dressing CB after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. Drg No FD - 282,260 |
| 68 | Removing the old cane from Stool dressing CB and recanning with new half round 2mm wide plastic cane (Godrej/Gwalior pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ BR Super) complete all as specified and as directed by the Engineer-in-Charge. Drg No FD - 282,261 |
| 69 | Supply & Fix nylon buffers with machine screw to legs of Stool dressing CB complete all as directed by Engineer-in-Charge. Drg No FD - 282,262 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender