Tender For Improvement Of Road By Cement Concrete Work (Rmc M-25) At Kali Banerjee Lane From 51 Kali Banerjee Lane (Bangbasi Club) To 60/1/1 Lakshman Das Lane Via Purajayi Club Under Ward No-18 Hmc (L-250.00M,Av.W- 3.6M) (Defect Liability Period:- 05
Tender Value
10.09 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
6 days left
EMD
20192
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Road By Cement Concrete Work (Rmc M-25) At Kali Banerjee Lane From 51 Kali Banerjee Lane (Bangbasi Club) To 60/1/1 Lakshman Das Lane Via Purajayi Club Under Ward No-18 Hmc (L-250.00M,Av.W- 3.6M) (Defect Liability Period:- 05 Years)
BOQ
| Sl. No. | Item Description |
| 1 | Brickwork with 1st class bricks in cemenmt mortar (4:1) (i) In foundation and plinth [PWD(Bldg) 2017, Page-15,It-7] 3RD Corri P-1,It-7 |
| 2 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) [P.W.D(Bldg) w.e.f 01.11.17, P-2,It-4(A)] |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand [P.W.D(Bldg) 3RD Corrigenda Addenda w.e.f 04.06.18, P-1,It-1] |
| 4 | Hire and labour charges for shuttering with hard wood for precast R.C Slab curved or stright and striking out the same including fitting, fixing the precast slab in position with necessary carriage and haulage, hosting etc complate in all respect (Only the area in contact with concrete to be measured) [PWD(Bldg) 2017, P-43, It-38] |
| 5 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel (a) SAIL/TATA/RINL Do\\" 9th Corrigenda & Addenda, P-1, It-40(a)(I)&(b) |
| 6 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier] In ground Floor and foundation (ii) Without approved concrete pump [P.W.D (Bldg) P-33,It- 19(i)] |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface] (a) 15 mmm thick Plaster (Ground floor) [P.W.D(Bldg) 2017 ,Page-189,it-1.ii] 3RD Corr P-49 Sl-1 |
| 8 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.[Ref : P.W.D.(Bldg) 2017, Page- 192, Item No. 15] |
| 9 | Consatruction joint at concrete road with 12mm thick thermocol board, in position including cutting to requisite size ands shape all direction of Engineer-in-Charge [rate as per Analysis No 37] |
| 10 | ADD 18% G.S.T |
| 11 | Labour Welfare Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender