Tender For Estimate For Pot Holes Repairing By Cement Concrete, Paver Block & Bituminous Work In Different Places Within Ward No- 10 To 15 (Defect Liability Period:- 03 Months)
Tender Value
20.88 Lakhs
Estimated cost
Bid Submission
21 Aug 2026
14 days left
EMD
41763
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Pot Holes Repairing By Cement Concrete, Paver Block & Bituminous Work In Different Places Within Ward No- 10 To 15 (Defect Liability Period:- 03 Months)
BOQ
| Sl. No. | Item Description |
| 1 | Box cutting or filling in road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of and grade as per direction and satisfaction of Engineer-in-charge in cluding uprooting and removing plants and jungles when and where needed. [P.W.D (Rds) P-237, It-3.16] |
| 2 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) [P.W.D(Bldg) 2017, P-2, It-4(A)] |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand [P.W.D(Bldg) 2017, Page-14, It-1] |
| 4 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety [Ref: P.W.D(Bldg) 2017, Page-26, It-10] |
| 5 | Wet Mix Macadam Base Course Providing, laying, spreading and compacting graded stone aggregrate to Wet Mix Macadam specification including screening of aggregrates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub-base/Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including incidental costs for lighting, guarding, barricading, making earthern bundh to protect the edges including cost of quality control complete as per Clause 406 od specifications for Road & Bridge Works of MoRT&H (5th Revision) [PWd(Rds) Page-249, It-4.12] |
| 6 | Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) (ii) On Granular surfaces treated with primer (Using Bitumen emulsion at the rate of 0.25 to 0.30 kg/sqm) [Ref : P.W.D (Rds), Page-248, Item No. 5.02] |
| 7 | Repairing pot holes and making up a small depressions with ramming or power rolling including screening, cleaning Chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the didintegrated materials, heating matrix and applying tack coat (including sides), finishing the top repaired surface levelled with adjoining area, including cost andwith premixed chips of bajrees with 54kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine (The payment is to be made on the basisi of loose net volume of stone materials consumed in the(b) Using Mobile HMP (Light Duty) [Ref: PWD(Rds) Page-279, It-10.07.(i).(b)] |
| 8 | Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) (i) On Bituminous Surface (using Bitumen Emulsion at the rate of 0.20 to 0.30 kg/sqm.) [Ref : P.W.D (Rds), Page-248, Item No. 5.02] |
| 9 | Providing, Laying and rolling of Open-graded premix Surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m3 per m2) and 11.2 mm (@ 0.009 m3 per m2) site stone aggregates, including throughly cleaning of the surface, screening, cleaning and pre heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion,...... [Ref : P.W.D (Rds), Page -254, Item-5.11] Analysis no-9 |
| 10 | Providing and laying premixed Seal Coat (Type-B) with approved quality sand/grit @ 0.6 M3 /100 m2 and bitumen binder on throughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100% passing through 2.36 mm sieve and retained on 180 micron sieve)........... (ii) By Manual means with Hot Bitumen Binder (@ 6.80 kg/10 sqm) [Ref : P.W.D.(Rds), Page -255, Item-5.13] Analysis no-10 |
| 11 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. Grey [Ref: PWD(Bldg) 2017, P-286, It-8] |
| 12 | ADD 18% G.S.T |
| 13 | Labour Welfare Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender