Tender For Repairing Of Pot Holes & Ditches By Paver Block & Cement Concrete & Bituminous Work At Bonbeharibose Road Chourabustee, Crossing Of Mallickphatak, Shibpur Burning Ghat To R.N.R.C Ghat, M.G.Road, Biplobiharen Ghosh Sarani, Kartick Chandra D
Tender Overview
Project Description
Tender for Repairing Of Pot Holes & Ditches By Paver Block & Cement Concrete & Bituminous Work At Bonbeharibose Road Chourabustee, Crossing Of Mallickphatak, Shibpur Burning Ghat To R.N.R.C Ghat, M.G.Road, Biplobiharen Ghosh Sarani, Kartick Chandra Dutta Road, P.K.Banerjee Road, I.C.Bose Road, N.D. Mukherjee Road, Gopallal Chowdhury Lane Under H.M.C Ward No-14,29,35,40 (Defect Liability Period:- 03 Months)
BOQ
| Sl. No. | Item Description |
| 1 | Box cutting or filling in road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of and grade as per direction and satisfaction of Engineer-in-charge in cluding uprooting and removing plants and jungles when and where needed. [P.W.D (Rds) P-237, It-3.16] |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand [P.W.D(Bldg) 2017, Page-14, It-1] |
| 3 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety [Ref: P.W.D(Bldg) 2017, Page-26, It-10] |
| 4 | Water bound macadam sub base by consolidating Jhama metal/Laterite chelly or stone metal/singles of specific size in hard crust to requisite thickness (Measured after compaction) in layer including screening of metals etc…………………….. And machine and compacting required density as per claus 404 of specification of road and bridge work of MORT&H (5th revision) (i) For Construction of sub base by consolidating jhama metal (63mm to 45mm) with moorum screening: Ass cost at site of 1.09 m3 of jhama metal and 0.26 m3 of moorum screening loose volume) to arrive at the consolidated rate [PWD(Rds) P-247, It-4.10] |
| 5 | Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. Grey [Ref: PWD(Bldg) 2017, P-286, It-8] |
| 6 | Providing and Laying Bituminous Macadam with Mobile Hot Mix Plant (Light Duty) using approved crushed aggregates of specified grading as per table 500.4 premixed withh Bituminous binder, transported to site laid over a previously prepared surface at specified laying temprature by means of approved and sutaible arrangements to the required grade, level and alingment and rolled with suitable power roller to break down, ...............cost of fuel and lubricants and wages of operational staff, wuality control complete as per specifications for Road & Bridge works of MoRT&H (5th Revision) B. For grading II (19mm) nominal size, 50-75mm thick) [PWD (Bldg) w.e.f 01.11.17, Analysed Rate] |
| 7 | Providing, Laying and rolling of Open-graded premix Surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m3 per m2) and 11.2 mm (@ 0.009 m3 per m2) site stone aggregates, including throughly cleaning of the surface, screening, cleaning and pre heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion,...... [Ref : P.W.D (Bldg), w.e.f 01.11.17] Analysis Rate |
| 8 | Providing and laying premixed Seal Coat (Type-B) with approved quality sand/grit @ 0.6 M3 /100 m2 and bitumen binder on throughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100% passing through 2.36 mm sieve and retained on 180 micron sieve)........... (ii) By Manual means with Hot Bitumen Binder (@ 6.80 kg/10 sqm) [Ref : P.W.D.(Bldg), w.e.f 01.11.17] Analysis Rate |
| 9 | ADD 18% G.S.T |
| 10 | Labour Welfare Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender