Tender For Addn / Altn Of Bathroom And Replacement Of Window In Bldg No P-452 And Addn / Altn Of Shed In Bldg No P-455 Mg Enclave In Zone Iii Area Under Ge (South) Jaipur At Jaipur Mil Station
Tender Value
16.54 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
19 days left
EMD
33080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn / Altn Of Bathroom And Replacement Of Window In Bldg No P-452 And Addn / Altn Of Shed In Bldg No P-455 Mg Enclave In Zone Iii Area Under Ge (South) Jaipur At Jaipur Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82571/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: ADDN / ALTN OF BATHROOM AND REPLACEMENT OF WINDOW IN BLDG NO P-452 AND ADDN / ALTN OF SHED IN BLDG NO P-455 MG ENCLAVE IN ZONE III AREA UNDER GE (SOUTH) JAIPUR AT JAIPUR MIL STATION CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick in cement mortar 1:4 on stone, brick masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified and directed. |
| 5 | M&L for preparing new plastered surfaces of external walls and applying two coats of weather proof paint (Exterior Acrylic Emulsion Paint) over a coat of 1 mm thick wall care putty and and over a coat of primer all as specified and directed with all scaffolding arrangement or working platform complete all as specified and directed. |
| 6 | M&L for preparation of new plastered surfaces and applying two coats of Oil boud distemper of approved shade/tint over a coat of birla wall care putty on wall and ceilings complete all as specified and directed. |
| 7 | M&L for complete removal of existing surfaces of walls, prepare the surface of wall and applying two coats of Oil bound distemper of approved shade/tint over a coat of birla wall care putty on walls and ceilling complete all as specified and directed. |
| 8 | M&L for Complete removal of exiting treatmetent, preparing surface by sand paper to obtain truely smooth surface, and applying two coats of weather proof paint (Exterior Acrylic Emulsion Paint) over a coat of 1 mm thick wall care putty over a coat of primer all as specified and directed with all scaffolding arrangement or working platform complete all as specified and directed. |
| 9 | S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in trenches, Type 'B', ISI marked of 110mm bore complete all as specified and directed. |
| 10 | S&F UPVC (SWR) bend of any radius of 110mm bore all as specified & directed by Engineer-in-Charge |
| 11 | PVC (SWR) floor trap of 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 12 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 13 | S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed. |
| 14 | S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed. |
| 15 | M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed. |
| 16 | S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity complete all as specified and directed. |
| 17 | S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 18 | M&L for 16mm CPVC pipes SDR 11 & fittings in trenches or wall complete all as specified and directed. |
| 19 | M&L for 20mm CPVC pipes SDR 11 & fittings in trenches or wall complete all as specified and directed. |
| 20 | S&F CP angle cock 15mm dia fancy type cast coper alloy complete all as specified and directed. |
| 21 | S&F CP cast copper alloy bib taps long body FANCY TYPE with wall flange fancy type of 15 mm bore quarter turn complete all as specified and directed. |
| 22 | Supply and fixed CP bib cock 15mm dia with crutch handle as approved fancy type two way Bib Cock complete all as specified and directed. |
| 23 | S&F CP overhead shower size 250x250mm square with revolving joints (with body rotation) & 400mm long arm shower with rabit cleaning system and all fittings complete all as specified and directed. |
| 24 | S&F CP Toilet paper holder complete complete all as specified and directed. |
| 25 | S&F CP single towel rail 600 mm complete all as specified and directed. |
| 26 | S & F Multipurpose Towel Rack, 65x20.3x11.3 cm complete all as specified and directed. |
| 27 | S&F CP Soap dish complete all as specified and directed. |
| 28 | S & F CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 29 | S & F hand shower 105 mm dia round shape multi flow with air effect (ABS Body & Face Plate Chromium Plated) with rubit cleaning system and incl Easy flex tube in chromium finish 1.5 meter long with both end nuts complete all as specified and directed. |
| 30 | S&F CP Basin mixture single lever cast coper alloy pillar type for WHB and long shank fancy type square size, 15 mm bore complete all as directed fixed incl all neccessories items complete all as specified and directed. |
| 31 | S&F CP brass hot and cold 15mm dia single lever wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange incl all neccessories items complete all as specified and directed. |
| 32 | S & F Corner glass shelf (with bracket) complete all as specified and directed. |
| 33 | M&L Towel ring of brass CP Square flange complete all as specified and directed. |
| 34 | S&F 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) complete all as specified and directed. |
| 35 | S&F SS connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified and directed. |
| 36 | S&F waste coupling brass chromium plated 32mm dia for wash hand basin complete all as specified and directed. |
| 37 | S&F white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, P/ S trap, incl all neccessories items complete all as specified and directed. |
| 38 | S&F counter/table top oval shape /rectangular wash hand basin vitreous china white including all fittings complete all as specified and directed. |
| 39 | S&F Tumblor holder in Bathroom complete all as specified and directed. |
| 40 | S&F Liquid soap dispenser holder in Bathroom complete all as specified and directed. |
| 41 | S&F CP grating 75 mm dia round with or without waste hole fixed on floor/nahani trap fixed with cement complete all as specified and directed. |
| 42 | S&F 20 mm dia Drapery Fancy type curtain rod of stainles steel for door/window with curtain bracket, Finials heavy supported fixed by self screw in wall complete all as specified and directed. |
| 43 | S&F 18mm Thick HDHMR (High density high moisture resistant) cupboard shutter of one side colour/white Laminated and other side decorative as in cabinets / door shutter fixed with minifix hardware where ever requred including edges band 22 mm wide 0.80 m thick (of pearlwood or equivalent) of matching colour on exposed surfaces of board fixed with polymaster adhessive of approved make (REHAu or equivalent) including trimming edges of edge band to true line of thickness of board by manual trimming .fixed to wall etc complete all as specified and directed. |
| 44 | S&F soft close clip on hinge bright finish (Auto close hinges) complete all as specified and directed. |
| 45 | S&F Stainless Steel Handles of size 150mm fancy type complete all as specified and directed. |
| 46 | S&F Stainless Steel Handles of size 100mm fancy type complete all as specified and directed. |
| 47 | M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all complete all as specified and directed. |
| 48 | M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L glazed ceramic Coloured Glossy tiles in vertical surface n exc 0.72 sqm including 10mm thick layer of screed bed in CM 1:4 on verticle surfaces and jointed in neat cement slurry, Adhesive and pointed in white or colour grouting to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified and directed. |
| 51 | M&L Non skid ceramic coloured tiles 10 to 12mm thick area of each tile n.exc 0.36 sqm in floors etc set and including 15mm thick layer of screed bed in CM 1:6 on floor surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 52 | S&F light shade Vetrified Ceramic digital tiles edge cut 10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) finished fair and even complete all as specified and directed. |
| 53 | M&L for granite 18 to 20mm thick as in steps, pillars, Jambs, counter slabs of WHB (of any type) work (table rubbed and polished) counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 54 | M&L 75 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 55 | Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level complete all as specified and directed. |
| 56 | M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even complete all as specified and directed. |
| 57 | M&L for Chequered designer cement concrete tiles PU Moulded 30cmx30cmx25mm thick, set,jointed and pointed in neat cement slurry in floors and 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 58 | M&L for Providing and laying 60mm thick factory made machine pressed chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength thickness and size / shape made by table vibratory method using PU mould laid in required colourful and pattern over and including 50mm thick compacted bed of fine sand ,compacting and proper embedding / laying of inner locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 59 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and as directed. |
| 60 | S&F LED Lite Looking Mirror 1200*800 in shape, made of premium quality “Saint Gobain” glass highly resilient and with great shine. Color Of The LED – Warm White with Smart touch switch or sensor that makes it glow as soon as one approaches the mirror, complete all as specified and directed. |
| 61 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 62 | Providing and fixing factory made uPVC any colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. ( Note: The unit rate quoted by contractor included cost of 5mm glass, stainless steel wire cloth and includes all other connected accessories, filling of gaps and holes with silicon and necessary required arrangements) complete all as specified and directed. |
| 63 | Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed. |
| 64 | Supply, and fixing 30 mm thick factory made uPVC door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with in built decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge. |
| 65 | S & F Solid PVC Moulded Door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforce with M.S square tube, high strength suppling & fixing in opening as per specification complete all as specified and directed. |
| 66 | Factory Made Solid PVC Moulded Door Shutter of any color with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing & fixing in the frame at site as per specification complete all as specified and directed. |
| 67 | Powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 68 | M&L Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium Door, window, louvers and ventilator shutters, fixed/ sliding/ Openable without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handle, tower bolt, handle and stopper, etc complete all as specified and directed. |
| 69 | Providing and fixing suspended false ceiling using mineral fibre board of size 600 x 600 x 15mm as ceiling over and including suspension metal(galvanised iron) system ) designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building or steel framed structure complete all as specified and directed.Make :- Armstrong(ANF RH 90), Everest , Gypsum India Ltd, Bison and Aerolite or equivalent as per approved makes. |
| 70 | S&F 5mm thick figured glass, pin head type not exc 0.5sqm in each pane, ordinary quality and glazing in louvers or existing snap beading and neoprene/rubber gasket in aluminium frames complete all as specified and directed. |
| 71 | S&F 10mm thick fixed or openable toughened plain/frosted glass for partition wall and door with channel, slider, fitting and hand rail in both side at bathroom complete all as specified and directed. |
| 72 | Excavation in trenches not exc.1.5 m wide and not exc.1.5 m in depth for foundation or for walls and getting out in soft/loose soil complete all as specified and directed. |
| 73 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 74 | M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 complete all as specified and directed. |
| 75 | Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed. |
| 76 | Removal of excavated soil to a distance exc. 250m but not exc. 500m and depositing where directed complete all as specified and directed. |
| 77 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 78 | Excavation in Post holes each not exc 0.5 cum getting out, Hard/Disintigrated rock complete all as specified and directed. |
| 79 | S&F MS Angle iron fencing posts or tee section fixed independently without connecting plates and similar works conforming to Fe-410-W (Gde-E-250) quality -A complete all as specified and directed. |
| 80 | M&L for nut and bolts hexagonal type of size 65 mm long and 12 mm dia complete all as specified and directed. |
| 81 | S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with L-type or J-type or cranked hook bolts including bitumen washers etc. as in roof, walls etc complete all as specified and directed. |
| 82 | M&L for Gusset Plate or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices, angle brackets complete all as specified and directed. |
| 83 | S&F Steel work in tubular trusses, tank stand complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 84 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 85 | M&L for Cutting opening in cement concrete walls without reinforcement (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings,including trimming surfaces toreceive rendering, etc complete all as specified and directed. |
| 86 | M&L for Cutting channels, grooves or rebates exc 15cm girth, but n exc 30cm and trimming surface complete all as specified and directed. |
| 87 | M&L for preparation of new steel surface applying one coat of red oxide, zinc chrome and two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including complete all as specified and directed. |
| 88 | S&F for designer mat finish tiles 10 to 12 mm thick of size from 0.16 sqm upto 1.00 Sqm in floors and side surafce etc set and jointed in neat cement slurry and pointed in white cement with using pigment to match color of tile over 15mm thick screed in CM(1:4) or approved adhesive complete all as specified and directed. |
| 89 | M&L for 25 mm thick PCC type B-1 (1:2:4) using 20 mm graded stone aggregates as in floors complete all as specified and directed. |
| 90 | Dismantling mild steel and structural work including grills, guard bars, doors and gates etc complete all as specified and directed. |
| 91 | S&F for cast iron prefabricated railing, grill, corner ornamental and intricate design or any similar type of work in shed, gazibo in any design conforming to all as specified complete all as specified and directed. |
| 92 | M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, for columns etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) (Fe 410W (Gde E-250) Quality A) complete all as specified and directed. |
| 93 | M&L for sheet 0.80mm above thick mangalore tile pattern approved color as in roof covering, roof shed in Gazibo/parking area fixed with self tapping screws with fixed silicon complete all as specified and directed. |
| 94 | M &L for Providing precast cement concrete louvres and jallies, 25 mm thick type B0 (12.5 mm crushed stone agggate ) set in CM 1:4 (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) Including Dismantling for louvers Jallies complete all as specified and directed. |
| 95 | M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 96 | Providing and fixing PVC insulated panels with EPS stuck of 1mm coloured /plain PVC sheet suitably placed in false ceiling with designer grid (15mm grid 8mm return) bevelled tegular suprafine XL 15mm / silhouete complete including necessary hanging system arrangement 6 mm dia suspenders as per manufacture's instruction which is required to be made from existing RCC roof/stone slab of building or steel framed structure complete all as specified and directed by Engineer-in-Charge.Make :- Armstrong(ANF RH 90) or equivalent make of Everest , Gypsum India Ltd, Bison and Aerolite complete all as specified and directed. |
| 97 | M&L for Powder coated aluminium (thickness of powder coating not less than 50 micron) door shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and directed. |
| 98 | M&L for 5.5mm thick sheet glass plain or tinted not exc 0.5sqm in each pane, ordinary quality and glazing in existing snap beading and neoprene/rubber gasket in aluminium frames complete all as specified and directed. |
| 99 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to wooden or aluminium shutters complete all as specified and directed. |
| 100 | S&F 12mm thick fixed or openable toughened glass for partition wall and door in bath area with channel, slider, fitting and hand rail in both side at different bathroom complete all as specified and directed. |
| 101 | M&L for Point wiring complete with1100 V grade single core PVC insulated FRLS unsheathed multistraned copper conductor cable 1.5 Sqmm ( Phase-Red,Neutral -black and earth continuity conductor 1.5 sqmm (Green) drawn into and incl. concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked i, including MS sunken box for mounting fitting like Modular switches, sockets, fan regulators type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings. (a) One light/fan point controlled by one, one way switch with cables 1.5sqmm size complete all as specified and directed. |
| 102 | (b) One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and directed. |
| 103 | (c ) One 3 pin 5 Amp socket outlet on independent with cables 1.5sqmm size complete all as specified and directed. |
| 104 | Description all as per Item No 100 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. |
| 105 | S&F Modular switch 1 way 6A,1 module complete all as specified and directed . |
| 106 | S&F Modular switch One way, 16 Amp rating complete all as specified and directed. |
| 107 | S&F Modular switch Bell Push , 5 Amp complete all as specified and directed. |
| 108 | S & F Modular socket 2 way 2 module, 230/250 volts 6A - 2/3 pin combined complete all as specified and directed. |
| 109 | S & F Modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 110 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 111 | S&F modular PVC white cover plate , 3 module complete all as specified and directed. |
| 112 | S&F modular White cover plate with frame,8 module complete all as specified and directed. |
| 113 | S & F PVC blanking plate one module complete all as specified and directed. |
| 114 | S&F modular Fan step regulator 120 watts ,2 module AC complete all as specified and directed . |
| 115 | S&F Electric bell multi music type AC 230 volts single pole for AC 230V, 50 Hz .ding dong type(ISI marked) complete all as specified and directed . |
| 116 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed |
| 117 | S&F LED wall mounted bracket light fitting fancy type 1x9/10 W,230V with holder including LED lamp warm white/ natural white connecting up with three coreflexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 118 | S&F factory made, sheet distribution boards, SPN 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps rated copper bus bar complete all as specified and directed. |
| 119 | M&L for Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and directed. |
| 120 | S&F LED light fitting 1x20 W,220 W,AC decorative box type with driver,holder ( warm white / natural white ) including LED tube light connecting up with three coreflexible copper conductor cable of suitable size from ceiling rose complete all as specified and directd. |
| 121 | S&F LED light fitting miirror type with high out put diffuser 2 feet 10 watt 220 V AC decorative type with driver holder ( warm white / natural white ) including LED tube light connecting up with three core flexible copper conductor cable of three core suitable for size from cceiling rose complete all as specified and directed. |
| 122 | S&F LED round/square surface mounted panel 1x18 W,230V,PDC aluminium housing and high translucent frosted plastic diffuser ( warm white/ natural white) connecting up with three coreflexible copper conductor cable of suitable size from ceiling rose complete all as specified and directd. |
| 123 | S&F PVC air fresh fan AC single phase 230 V of size 250mm sweep heavy duty with blades and frame and louvers complete all as specified and directed. |
| 124 | S&F PVC wall mounted fan AC, single phase, 230 V of size 450mm sweep heavy duty with blades and frame complete all as specified and directed. |
| 125 | S&F electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. completeall as specified and directed. |
| 126 | S&F 20 Amp socket with mini MCB modular box for AC/geyser made up of polycarbonate including plug top of 20Amp complete all as specified and directed. |
| 127 | S&F in repair of factory made, sheet distribution boards, SPN 4 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps rated copper bus bar complete all as specified and directed. |
| 128 | S&F MCB confirming to IS-8828 : 1996, IEC-898 : 1995 with 10 KA rupturing capacity SP 5 to 32 amps ' C 'Curve, 240 V complete all as specified and directed. |
| 129 | S&F MCB confirming to IS-8828 : 1996, IEC-898 : 1995 with 10 KA rupturing capacity MCB SPN 40 Amps 'C' curve, 240 V complete all as specified and directed. |
| 130 | M & L for sub main wiring with two single core 6.0 Sqmm PVC insulated FR-LSH unsheathed cable multi-stranded copper conductor drawn through and including PVC conduit 25 mm medium grade concealed with all fittings and fixing accessories on roof, walls, ceiling etc. including 6.0 Sqmm PVC insulated unsheathed one core multistranded copper conductor earth wire complete all as specified and directed. (Note: Two run of 6 sqmm and one run of 6 sqmm earth wire including PVC conduit shall be measured & paid as one length) |
| 131 | M & L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth wire of 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia \\" light grage \\" earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron \\" medium grade \\" with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge .Note : PCC Chamber shall be constructed atleast 1.5 mtrs away from the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner. |
| 132 | Schedule of Credit Total in Figures 0.0 0.0 -2700.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Two Thousand Seven Hundred Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender