Tender For Supply And Delivery Of Energy Efficient Led Fittings For Replacing The Defective Street Lights 20W,40W,70W,120W And 150 Watts)Various Location In Ward No 5 To 9,22 To 24 And 50 To 61 Areas Coimbatore Corporatio East Zone. Roc No. 3844 /202
Tender Value
92.50 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
4 days left
EMD
92500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Delivery Of Energy Efficient Led Fittings For Replacing The Defective Street Lights 20W,40W,70W,120W And 150 Watts)Various Location In Ward No 5 To 9,22 To 24 And 50 To 61 Areas Coimbatore Corporatio East Zone. Roc No. 3844 /2026/Md3
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Technical Bid Corrigendum | Technical Bid | 19-Aug-2026 |
| 2 | 13-Aug-2026 | Pre bid meeting corrigendum | Technical Bid | 27-Aug-2026 |
| 3 | 13-Aug-2026 | Date Corrigendum 2 | Date | 27-Aug-2026 |
| 4 | 05-Aug-2026 | Technical Bid Corrigendum | Technical Bid | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 20W LED Street light Fitting:Suppl of high-quality integrated LED Street Light with a minimum system lumen of 2400 lm and system wattage not exceeding 20W with a nominal system efficacy of 120 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50K hours@L70. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK07.Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 4 KV SPD in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 140V to 270V, PF≥0.95 (@ full load), THD≤10% (@ full load). The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322.The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.Replacement Warranty Minimum 3 years for LED luminaries and Electronic driver. |
| 2 | Supply of 40W LED Street light Fitting:Supply of high-quality integrated LED Street Light with a minimum system lumen of 4800 lm and system wattage not exceeding 40W with a nominal system efficacy of 120 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50K hours@L70. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK07. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 4 KV SPD in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 140V to 270V, PF≥0.95 (@ full load), THD≤10% (@ full load). The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322. The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.Replacement Warranty Minimum 3 years for LED luminaries and Electronic driver. |
| 3 | Supply of 70W LED Street light Fitting:Supply of high-quality integrated LED Street Light with a minimum system lumen of 8400 lm and system wattage not exceeding 70W with a nominal system efficacy of 120 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50K hours@L70. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK07. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 4 KV SPD in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 140V to 270V, PF≥0.95 (@ full load), THD≤10% (@ full load). The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.Replacement Warranty Minimum 3 years for LED luminaries and Electronic driver. |
| 4 | Supply of 90W LED Street light Fitting: Supply of high-quality integrated LED Street Light with a minimum system lumen of 11000 lm and system wattage not exceeding 90W with a nominal system efficacy of 120 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50K hours@L70. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK07. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 4 KV SPD in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 140V to 270V, PF≥0.95 (@ full load), THD≤10% (@ full load). The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322. The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.Replacement Warranty Minimum 3 years for LED luminaries and Electronic driver. |
| 5 | Supply of 120W LED Street light Fitting: Supply of high-quality integrated LED Street Light with a minimum system lumen of 14400 lm and system wattage not exceeding 120W with a nominal system efficacy of 120 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50K hours@L70. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK07. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 4 KV SPD in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 140V to 270V, PF≥0.95 (@ full load), THD≤10% (@ full load). The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322. The the successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.Replacement Warranty Minimum 3 years for LED luminaries and Electronic driver. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Aug 27, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Aug 27, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender