Tender For Rectification Work Of 1 Water Supply Scheme Under Package-3 To Arakkulam Grama Panchayath In Idukki District
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
43 days left
EMD
14900
Bank guarantee accepted
Document Fee
1200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rectification Work Of 1 Water Supply Scheme Under Package-3 To Arakkulam Grama Panchayath In Idukki District
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX 1- AKSHARA WSS |
| 2 | 100.54.3.1Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 4.5m by earth work excavation inor under water, after closing the inlet valves and plugging any holes in the steining by engaging diverswith breathing accessories, bailing out water using pumset of suitable capacity, lifting the excavatedsilt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m fromthe periphery of the well, including engaging coolies for scrapping the inner side of the well, withoutcausing any damages to the existing structures and installations, including hire and conveyance of toolsand plant and as per the directions of the department officers etc. complete. |
| 3 | 5.1.3Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarsesand : 4 graded stone aggregate 20mm nominal size |
| 4 | 5.9.2Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) includingattached pilasters, butteresses, plinth and string courses etc |
| 5 | 5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 6 | 10.2Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, includingcutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 7 | 51.20Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation asapproved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 gramsper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet andpolyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum toavoid scratchesduring transportation and should be supplied in single length upto 12 metre or asdesiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excludingthe cost of purlins, rafters and trusses and including cutting tosize and shape wherever required |
| 8 | 18.48Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 9 | od300288/2023_2024Providing and fixing Water Meter, Indian Standard, Class B, Multijet, 15mm ( 1/2 inch ) includingconveyance and fittting charges as per engineer in site. |
| 10 | 18.12.1Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. Externalwork15 mm dia nominal bore |
| 11 | 18.12.3Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. Externalwork25 mm dia nominal bore |
| 12 | 10.1Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | 4.1.3Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 14 | 18.17.1Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mmnominal bore |
| 15 | 100.50.3.1Rectification of leakages of 50 mm GI Pipes in exposed portions by replacing lengths up to 1.0m bycutting, removing and stacking the damaged portion from the existing line without causing any damagesto the remaining portion and specials and conveying and replacing with GI Pipes of suitable size andjointing by three run welding to make a water tight joint, painting the welded portion, testing the line to therequired pressure, rectifying any defects noticed, without causing any damages to any other utilities,including the charges hire and conveyance of tools, plant and materials to the leak site, bailing out water,lighting, watching, ribbon fencing, caution boards, traffic diversion, necessary scaffolding including thecost of specials but excluding cost of pipe and as per the direction of departmental officers etc. complete |
| 16 | Water Quality Test Physical and chemical Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 43 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 45 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender