Tender For special Repairs To Bldg No T-12A At D Coy 5104 Asc Bn & T-02 At 103 (I) Comp Pl Asc, Provn Of Entrance Gate With Wall 02 X Crest And 30X1.5/2 Ss Letter With Led Back Light At 4004 Fd Hosp & Toilet Block For Office Complex At Bn Hq 7004 Eme
Tender Value
48.74 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
4 days left
EMD
97500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg No T-12A At D Coy 5104 Asc Bn & T-02 At 103 (I) Comp Pl Asc, Provn Of Entrance Gate With Wall 02 X Crest And 30X1.5/2 Ss Letter With Led Back Light At 4004 Fd Hosp & Toilet Block For Office Complex At Bn Hq 7004 Eme Bn And Addn/Altn To Bldg No T-16 Opw At D Coy 5104 Asc Bn Under Ge (N) Tezpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | REVISED BOQ | BOQ | 25-Aug-2026 |
| 2 | 25-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 01-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : SPL REPAIRS TO BLDG NO T-12A AT 'D' COY 5104 ASC BN & T-02 AT 103 (I) COMP PL ASC, PROVN OF ENTRANCE GATE WITH WALL 02 X CREST AND 30X1.5/2' SS LETTER WITH LED BACK LIGHT AT 4004 FD HOSP & TOILET BLOCK FOR OFFICE COMPLEX AT BN HQ 7004 EME BN AND ADDN/ALTN TO BLDG NO T-16 OPW AT D COY 5104 ASC BN UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8292/E8) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Dismantling asbestos cement sheet, ridge (corrugated, semicorrugated, plain etc.) in roof coverings, walls, ridges etc. or of similar types complete in all respect as specified and directed. |
| 3 | Dismantling of timber scantlings 40 sqcm & over in section framed work complete all as specified and directed. |
| 4 | S & F second class hardwood plain,solid ,straight,chowkats and frames,wrought, framed rebated on the solid ,rounded or chamfered,put together with glue pinned at joints, complete in all respect as specified and directed. |
| 5 | Dismantling of floor/ wall tiles including cement mortar bedding of any thickness upto PCC/ RCC/brick surface and rubbish off the premises, complete in all respect all as specified and directed. |
| 6 | Dismantalling of cement concrete (unreinforced) in ground floors and pavings not exceedings 15 cm thickness (below or above ground level), complete in all respect as specified and directed. |
| 7 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed. |
| 9 | Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete in all respect as specified and directed. |
| 10 | M&L for brick work with sub-class \\"B\\" old size bricks of class designation (CD) 75, straight or curved on plan exc 6m mean radius, built in cement mortar (CM) 1:6, including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 11 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed. |
| 12 | S&F of pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock stike plate, etc., complete, all as specified and directed. |
| 13 | S&F second class hardwood plain, solid, straight, chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete in all respect as specified and directed. |
| 14 | Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20 mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary formwork complete in all respect as specified and directed. |
| 15 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet having tensile strenght of 550 Mpa as in ridge, valley gutter or of similar type, fixed with self tapping screws with bitumen washer to truss members of any material, complete in all respect as specified and directed (The measurement shall be carried out as in a plain sheet). |
| 16 | S&F coloured 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet having tensile strenght of 550 Mpa as in eves covering or of similar type, fixed with self tapping screws with bitumen washer over mild steel flats, angles etc. and screws for fixing with framed structure complete in all respect as specified and directed. (Note:- MS work shall be measured and paid separately). |
| 17 | S&F pre-painted galvanized aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in eaves board, eaves gutters, purpose made or of similar type complete in all respect as specified and directed. |
| 18 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality \\"A\\") including necessary welding complete complete all as specified and directed. |
| 19 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality \\"A\\") including necessary welding complete complete all as specified and directed. |
| 20 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. (Make:- Eternit, Everest or equivalent) |
| 21 | Material and labour for 25mm cement concrete type B-0, 1:2:4 (using 12.5 mm crushed and graded stoone aggregate) in flooring and finishing fair and even without using extra cement in all respect as specified and directed. |
| 22 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 23 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, complete in all respect as specified and directed. |
| 24 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, complete in all respect as specified and directed. |
| 25 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.15 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, complete in all respect as specified and directed. |
| 26 | S&F for vitrified floor tiles 10mm thick (square/rectangular) in flooring & skirting, area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white cement with pigment to martch the itle colour over 15mm thick screed bedding in cement sand mortar (1:6) including dismanting of existing tiles with screed bed/plastering complete in all respect as specified and directed. |
| 27 | M & L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed. |
| 28 | M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection/footpath finished the surface even and smooth without using extra cement. |
| 29 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (1:4), finished even & smooth without using extra cement, complete in all respect as speicifed and directed. |
| 30 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of of wall in cement mortar (1:6), finished even and smooth without using extra cement, complete in all respect as spefied and directed. |
| 31 | M & L 15mm thick plastering on wall in cement mortar (1:4) finished even and smooth without using extra cement on one side of lathing or stone masonary surface other than fair face complete in all respect as specifified and directed. |
| 32 | Supply only water proofing compound complete, in all respect as specified and directed. |
| 33 | S & F PVC coloured insulated over MS pipe 20mm dia curtain rod with fixing bracket, stops, rollers etc. complete in all respect as specified and directed |
| 34 | S&F 15mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down indcluding necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 35 | S&F 20mm bore of tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down indcluding necessary cutting, chauging etc. complete in all respect as specified and directed. |
| 36 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium \\"U\\" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 37 | S & F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 38 | S & F powder coated aluminium window and vintilator shutters, side hung type with/without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2 No.) suitable handle handle (1No.) complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 39 | S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mm including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller 2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner) |
| 40 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 41 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered complete all as specified and directed. |
| 42 | S&F 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 43 | S&F 75mm size butt hinges medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed. |
| 44 | S&F 20mm dia tubular towel rail 600mm long of cast copper alloy, chromium plated with end brackets complete in all respect as specified and directed. |
| 45 | S&F 100 mm size of stainless steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 46 | S&F 100mm size Stainless steel butt hinges complete all as specified and directed. |
| 47 | S&F 35 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed. |
| 48 | S&F 30mm thick flush shutter, solid core construction, with block board core with decorative face veneers with lipping on both sides complete all as specified and directed. |
| 49 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete in all respect as specified and directed. |
| 50 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing complete all as specified and directed. |
| 51 | M&L preparation of untreated new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 52 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete in all respect as specified and directed. |
| 53 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 54 | S&F 250mm length of bolt, Aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 55 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 56 | S&F Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 57 | S&F Aluminium handle cast type anodised 150 mm size (ISI marked) complete all as specified and directed. |
| 58 | S&F 125 mm size, Aluminium handle cast type anodised complete all as specified and directed. |
| 59 | S&F Aluminium anodised sliding door bolt with hasp, staple (bolt type) 16mm dia bolt, 250 mm long, with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate, complete in all respect as specified and directed. |
| 60 | S&F aluminium anodised sliding door bolts with hasp and staple (boil type) 19mm dia bolt 300 mm long complete all as specified and directed. |
| 61 | S &F aluminium anodised sliding door bolts with hasp and staple (bolt type) 12mm dia bolt 300mm long, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 62 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 63 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete, in all respect as specified and directed. |
| 64 | S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. |
| 65 | S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed. |
| 66 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 67 | S&F 20mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed. |
| 68 | S&F PVC coloured insulated over MS pipe 20 mm dia curtain rod with fixing bracket, stops, rollers etc. complete all as specified and directed. |
| 69 | S&F in repairs long body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete in all respect as specified and directed. |
| 70 | S&F in repairs short body Bib taps of 15 mm bore, fancy type CP finish cast copper alloy with crutch handle, screwed down, screwed for iron pipes, complete in all respect as specified and directed. |
| 71 | S&F of Single unit wash down water closet pan white including plastic water closet seat, white, Single unit with flat bottom,(Make - Jaquar WHT-6851S110PP, Hindware \\"Starc\\" P-SW) complete in all respect as specified and directed. |
| 72 | S&F chrome finished toilet paper holder of cast copper alloy complete all as specified and directed. |
| 73 | S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed. |
| 74 | S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement floor trap complete all as specified and directed. |
| 75 | S & F 15mm bore dia CP finish,angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed. |
| 76 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed. |
| 77 | S & F 5.0 mm thick bevelled edge mirror of selected quality decorative type mounted on 6 mm commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 78 | S&F in Vitreous China wash basin (flat back or angle back type) size 500x400mm x150mm, including waste coupling 32mm SS, PVC waste pipe,15 mm bore dia fancy type CP finish swan neck basin mixer, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes complete all as specified and directed. Make :- Jaquar, Cat Part No. JDS-WHT-25909 (TT WHB), Cat Part No FLR-CHR-5167NB (Swan neck basin mixer) |
| 79 | S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, PVC waste pipe including 15 mm bore dia fancy type CP finish pillar tap, cast copper alloy with capstand heads, screw down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screw for iron pipes and bottle trap complete in all respect as specified and directed. |
| 80 | S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed. |
| 81 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 82 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 84 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 110 mm bore, complete in all respect as specified and directed. |
| 85 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete in all respect as specified and directed. |
| 86 | S&F PVC (SWR) single (single 'T') equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 87 | S&F PVC (SWR) single (single 'T') equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 88 | S&F PVC (SWR) bends any radius 110 mm bore, complete in all respect as specified and directed. |
| 89 | S&F PVC (SWR) bends any radius 75 mm bore, complete in all respect as specified and directed. |
| 90 | S&F PVC (SWR) 75mm dia bent type complete all as specified and directed. |
| 91 | S & F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed. |
| 92 | S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed. |
| 93 | S & F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed. |
| 94 | S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed. |
| 95 | S & F Rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) including two tank nipples one at inlet and other at one outlet of 20mm dia complete all as specified and directed. |
| 96 | M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC Type A-1 1:1.5:3 Mix Baffle walls and Roof Slab including beams etc with Vent shaft,manhole openings with cover connection etc for 05 users capacity all as per Drawing available with sub division complete all as specified and directed. |
| 97 | M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in Type A-1 1:1.5:3 cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2m dia and 3.0m depth complete all as specified and directed. |
| 98 | M & L for 150mm bore pipe for concrete bed in PCC 1:4:8 type D 2 using 40mm nominal size crushed and graded stone aggregate to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in complete in all respect as specified and directed. |
| 99 | S & F PVC (SWR) pipes single socketed in any length with rubber ring jointslaying in trenches 150 mm bore complete in all respect as specified and directed. |
| 100 | M&L for cement concrete Type C-2, 1:3:6 (using 40mm nominal size crushed and graded stone aggregate) in foundations filling and mass concrete as in manhole etc. complete in all respect as specified and directed. |
| 101 | M&L for PCC 1:2:4 type B 1 (using 20mm nominal size crushed and graded stone aggregate) as in surface channels & drains complete in all respect as specified and directed. |
| 102 | M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. .complete in all respect as specified and directed. |
| 103 | S & F PTMT ball valve high pressure 20mm bore with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC pipe/fittings complete all as specified and directed. |
| 104 | S&F rolled mild steel in joist, angle, channel, beam, flat sections fixed independently without connecting plates etc. of grade Fe-410W (Gde E-250) quality A complete in all respect as specified and directed. |
| 105 | M&L for 20-25 mm thick machine cut kota stone single piece in staircase over 15 mm thick cement mortar (CM) 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 106 | M&L for 20-25 mm thick machine cut kota stone slab single piece in riser of steps, skirting, dado and pillar over 15 mm thick rendering in cement mortar (CM) 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete in all respect as specified and directed. |
| 107 | S&F for coloured rubber moulded, glazed pre coated chequered cement concrete tiles of 30cm x 30cm x 20-25mm thick with grey cement with pigment,: set jointed and pointed in neat cement slurry with pigment in floors including over inlcude 15mm thick screed bed in CM 1:4 complete in all respect as specified and directed. |
| 108 | M&L for precast RCC, type B-1 1:2:4 (using 20mm crushed and graded stone aggregate) as in manhole covers/cover slabs or of similar type slab works, etc, incl necessary formwork and holding/unloading of the same and fixed in position, complete in all respect as specified and directed. |
| 109 | Providing and laying reinforced concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 1:2:4 type B-1, (using 20 mm crushed and graded stone aggregate) complete in all respcet as specified and directed. |
| 110 | M & L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar works all not exceeding 20cm wide complete in all respect as specified and directed. |
| 111 | S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 112 | S&F TMT bar cut to length bent to shape required 5mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, quality conforming to Fe-410 complete in all respect as specified and directed. |
| 113 | M&L for mild steel TMT bars 5mm dia and over upto and including 10 mm dia cut to length, bent to shape and binding with MS wire (annealed) not less than 0.90 mm dia as in stirrups, nibs etc complete as directed. |
| 114 | Providing and laying plinth protection of 75mm thick cement concrete, using type C-1, (1:3:6) (using 20mm nominal size crushed and graded stone aggregate), laid in alternate penals/bays and finished the surafce even and smooth without using extra cement complete in all respect as specifified and directed. |
| 115 | M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed. |
| 116 | M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers) wall care putty, complete in all respect as specified and directed. |
| 117 | M&L for preparation of old decorated plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface including complete removal of existig treatment, complete in all respect as specified and directed. |
| 118 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed. |
| 119 | M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed. |
| 120 | M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed. |
| 121 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper including filling of voids with wall care putty on plastered surface, complete in all respect as specified and directed. |
| 122 | M&L for preparing of new undecorated wooden surface, of any description, not otherwise described, overe 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer, complete in all respect as specified and directed. |
| 123 | M&L for preparation of new undecorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 124 | M&L for preparing of old decorated wooden surface, of any description, not otherwise described, over 10 cm width or girth, and applying two coats of synthetic enamel paint, complete in all respect as specified and directed. |
| 125 | M&L for preparing of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil, complete in all respect as specified and directed. |
| 126 | M&L for preparation of old decorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete in all respect as specified and directed. |
| 127 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep geeting out in soft/loose soil. |
| 128 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed. |
| 129 | M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete in all respect as specified and directed. |
| 130 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete in all respect as specified and directed. |
| 131 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed. |
| 132 | M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete in all respect as specified and directed. |
| 133 | M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface complete in all respect as specified and directed. |
| 134 | M&L for cement concrete Type D-2, 1:4:8 (using 40mm nominal size crushed and graded stone aggregate) in foundations filling and mass concrete as in surroundings of fencing post etc. complete in all respect as specified and directed. |
| 135 | M & L for RCC Cement concrete (Nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all respect as specified and directed. |
| 136 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in foundations, including rafts,footings, foundation beams,plinth beams bases for columns, etc complete all as specified and directed. |
| 137 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc complete all as specified and directed. |
| 138 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc complete all as specified and directed. |
| 139 | Providing and laying reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in chajjas, etc complete in all respect as specifified and directed. |
| 140 | M&L for 75 mm thick of cement concrete flooring using type B 1, 1:2:4 (using 20 mm nominal size crushed and graded stone aggregate) for plinth protection and finished fair and even without using extra cement, complete in all respect as specified and directed. |
| 141 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finish of flat surface complete in all respect as specified and directed. |
| 142 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions in fair finish of flat surface complete in all respect as specified and directed. |
| 143 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc. also splays between floors and beams, etc. in rough finished flat surface of concrete complete all as specified and directed. |
| 144 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc.20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work in rough finished flat surface of concrete complete all as specified and directed. |
| 145 | S&F mild steel sections joist, channel, angle, or tee section, fixed independent, without connecting pates, etc (cut to lienghs i.e. within 20 mm of the lenght indicated) etc. using FE-410W (Grade E-250 quality \\"A\\") complete in all respect as specified and directed. |
| 146 | M&L for 20mm thick Granite(of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 147 | M&L Granite of any type work (table rubbed and polished) in slab, steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer of mortar in CM 1:4 fixing of tiles in slab complete all as specified and directed. |
| 148 | M&L mild steel works in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing (Fe 290 (Gde E-165) ) complete in all respect as specified and directed. |
| 149 | M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed |
| 150 | M&L for river bed fine sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed. |
| 151 | M & L for filling with approved earth obtained from out side of MoD land including raising (or lowering) earth, spreading in layers n. exc. 30cm thick, watering, ramming/rolling and finishing to required size, shape, etc. n. exc. 2.0m high from base complete in all respect as specified and directed. |
| 152 | Preparaing new un decorated plastered or unplastered surface of wall and apply three coats of white wash complete in all respect as specified and directed. |
| 153 | S&F of 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling |
| 154 | M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4 fixing of tiles in floor complete all as specified and directed. |
| 155 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC casing caping (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch including taking down old unserviceable existing point wiring.Note:- (i) Cost of PVC casing caping, modular plates,frames, cover plates etc; are deemed to be included in the quoted rate. |
| 156 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 157 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 158 | All as per item above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed. |
| 159 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch.Note:- (i) Cost of PVC conduit, modular plates,frames, cover plates etc and cement mortar after wall chasis to make good disturbed surfaces; are deemed to be included in the quoted rate. |
| 160 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 161 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 162 | All as per item above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed. |
| 163 | S & F in replacement of modular switch 10A,1 module single pole, one way complete all as specified and directed. |
| 164 | S & F in replacement of modular socket outlet 5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 165 | S & F in replacement of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 166 | S & F in replacement of modular switch 16A,1 module single pole, one way complete all as specified and directed. |
| 167 | S & F in replacement of ceiling rose polycarbonate type three terminals complete all as specified and directed. |
| 168 | S & F in replacement of modular step type electronic fan regulator ,two module 120 watt single pole 240 Volts complete all as specified |
| 169 | Supply & Fix (S&F) in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap including 10W LED bulb B22 suitable for pendent fitting complete all as specified and directed |
| 170 | S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 171 | S&F in replacement mirror light batten type 10/11 W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge. |
| 172 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC in warm white color recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in charge. |
| 173 | S & F in replacement new generation energy saving and environmental friendly long life 35 W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including necessary brackets (made out of suitable bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed. |
| 174 | S&F for new generation energy saving Lawn/garden light 10 W environmental friendly long life aesthetically desiged PDC aluminium body with opal diffuser suitable for landscape luminire for diffused lighting with high power LED as light source complete as per category: Havells \\"TURIN LED BOLLARD\\" or similar specification including taking down of old unserviceable existing light fittings complete all as specified & as directed |
| 175 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16 sq. mm 4core complete all as specified and directed. |
| 176 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 177 | Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete. |
| 178 | M&L for 40mm dia GI tubing light grade with all necessary fittings laid in trenches fixed to walls/poles/under road/floor etc for cable protection with suitablke clamp, complete all as specified and directed. |
| 179 | M&L for 15mm dia GI tubing medium grade with all necessary fittings laid in trenches fixed to walls/poles/under road/floor etc for cable protection with suitablke clamp, complete all as specified and directed. |
| 180 | Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for inserting GI tubing upto 100 mm bore complete all as specified and directed. |
| 181 | M&L for LT cable tray of suitable size not less than 350 x 25 x 2.5 (mm) GI perforated tray complete all as specified and directed. |
| 182 | S & F for LED 3D Sign board of minimum size 22 x 2.5 feet with acrylic 3D backlite glow letter made from 1mm thick sheet and laser cut acrylic material embedded with stainless steel covering of size 1.5/2 inches mounted on ACP frame LED embedded inside the letter with the suitable driver complete all as specified and directed. |
| 183 | Taking down ceiling fan any type/ size from hook and dismantling cable and blades and bring in to contractor store for repair and hanging ceiling fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately) |
| 184 | Taking down exhaust fan any type/ size from wall and dismantling sealing cable and dismantling blades and bring in to contractor store for repair and fixing exhaust fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately) |
| 185 | S&F in replacement single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed . |
| 186 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor complete and old fan deposit to E/M yard complete all as specified and directed by Engr-in Charge |
| 187 | S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed. |
| 188 | Supply and draw submain wiring in replacement with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 189 | Supply and draw submain wiring in replacement with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 190 | S & F in replacement sheet metal enclosure double door for MCB DBs SPN 12 way 240 V, complete flush mounted all as specified and as directed. |
| 191 | S & F sheet metal enclosure double door for MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed. |
| 192 | S & F MCB single pole (SP) 6 to 32 Amps, 240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 193 | S & F MCB Single pole & neutral (SPN) 32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 194 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
| 195 | Materials and labour for earthing complete with MS galvanised steel earth plate electrode 600mm x 600mm x6mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 metres deep below ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected with 32x6mm galvanised iron or steel earthing lead to be protected by galvanized iron pipe 40mm bore (medium grade) and other end connected to earthing test point including providing funnel and watering pipe 20mm bore galvanized iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate) 50 mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C both ways and suitable handle made of 10mm dia) including necessary earth work, excavation, returned filling and removal of surplus earth upto a distance not exceeding 50 m etc all shown on electrical plate No. 3 of MES schedule Part-I (2009) complete including test point and testing on completion, complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 01, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender