Tender For Certain Repairs To Rooms And Toilets Of Hostel And Repairs To Roof Treatment, Joinery, Flooring, Sanitary Fittings Including Internal Wiring At Advs & Aps Beas Under Ge Kapurthala.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
13 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Rooms And Toilets Of Hostel And Repairs To Roof Treatment, Joinery, Flooring, Sanitary Fittings Including Internal Wiring At Advs & Aps Beas Under Ge Kapurthala.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Certain repairs to rooms and toilets of hostel and repairs to roof treatment, joinery, flooring, sanitary fittings including internal wiring at ADVS & APS Beas under GE kapurthala. Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 4 | M&L for providing and fixing factory made uPVC white colour siliding window three track made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mmx52mm) , sliding sash (42mmX67mm). Sliding mesh Sash (42mm X 57mm) Sliding interlock (One Vertical length in each shutters) (45.5mm X 28mm), Glazing bead ( 24.5mmX16mm) will be miterd cut and fusion welded at all corners ,including drilling of holes for fixing hardware and drainge of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured lor payment purpose. |
| 5 | S&F of steel windows or ventilators, fixed type, with glazing bars etc; complete all as specified and diected. |
| 6 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 7 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 8 | M&L for framed work as in post, doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, purlin, truss etc, complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and directed. |
| 9 | Hacking out old broken glass (anythickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed. |
| 10 | S&F of aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed. |
| 11 | Supply only 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 12 | S&F of 5.50mm thick sheet glass but exc 0.5 Sqm in each , slected quality and glazing with beads fixed with metal panel pins with solar control film 25micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified and directed. |
| 13 | S&F of butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 14 | S&F of aluminium anodised barrel tower bolts of extruded section of 150mm size etc, complete all as specified and directed. |
| 15 | S&F of aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or ectruded sections and fixing bolts and sliding bolts in extruded sections or cast aluminium alloy of size 250mm complete all as specified and directed. |
| 16 | S&F of aluminium handles, cast type anodised of size 125mm etc; complete all as specified and directed. |
| 17 | S&F of door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 18 | S&F of extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified and directed. |
| 19 | S&F in repairs 300mm MS ordinary rat tail rod pattern springs incl roller and roller plate (Helical door spring) welded to steel/wooden chowkats, complete all as specified and directed. |
| 20 | S&F in repair anodised aluminum alloy curtain rail chromium plated with fixing brackets,stops, roller etc; complete all as specified and directed. |
| 21 | S&F in repair double legged floor door stopper aluminium alloy body and tongue with hard drawn steel spring overall length of cover plate 140mm. complete all as specified and directed. |
| 22 | Dismantling asbestos cement (corrugated, semi-corrugated, etc;) sheets in roof coverings including ridges, complete all as specified and directed. |
| 23 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 24 | S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 25 | Taking down cement plaster on brick ot stone wall etc; including raking out joints, hacking for key scrubbing down with water etc; complete all as specified and directed. |
| 26 | Dismantling of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc; but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 27 | M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in cement mortar 1:4 etc; complete all as specified and directed. |
| 28 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 29 | -Ditto- all as per item No. 27 above but except bricks including cleaning of mortar etc; complete all as specified and directed. |
| 30 | M&L for PCC type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in parapets walls, benching, coping and filling at junction of brickwork and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete including use of forwork (straight or curved) complete all as specified and directed. |
| 31 | M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on any of brick work or concrete surfaces of walls finished fair, complete all as specified and directed. |
| 32 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth without using extra cement, complete all as specified and directed. |
| 33 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for preparation of new plastered surfaces of wall and applying two coat oil bound distemper over and including a coat of primer, complete all as specified and directed. |
| 35 | M&L for preparation of new plastered and unplastered surfaces of ceiling and applying two coats oil bound distemper complete all as specified and directed. |
| 36 | M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint on walls over and including a coat of primer, complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surface of walls and applying two coats of plastic emulsion paint over a coat of alkali resistant primer complete all as specified and directed. |
| 38 | M&L for preparation of new plastered surfaces of wall applying two coat of synthetic enamel paint complete all as specified and directed. |
| 39 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified. |
| 40 | Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors etc; complete all as specified and directed. |
| 41 | M&L for vitrified ceramic tiles dark shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42sqm but not exceeding 1.00sqm, in wall etc, over and including 10mm thick plaster in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 42 | M&L for non skid ceramic tiles dark shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42sqm but not exceeding 1.00sqm, in floors etc, over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 43 | M&L for 25mm thick PCC 1:2:4 type B-1 with 20mm graded stone aggregate as in flooring, finished even and rough to receive the topping layer, complete all as specified and directed. |
| 44 | M&L for granite 16-18mm thick work in steps, jambs,pillars, window cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) including 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 45 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 46 | M&L for preparation of old decorated surfaces of walls and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying 2-3mm wall care putty to achieve smooth finish complete all as specified and directed. |
| 47 | M&L for preparation of old plastered surface of walls and applying two coats of plastic emulsion paint over a coat of alkali resistant primer complete all as specified and directed. |
| 48 | M&L for preparation of old painted surfaces of wall applying two coat of synthetic enamel paint complete all as specified and directed. |
| 49 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 50 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 51 | Complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on wall,ceiling, roof projections including facia, cornices etc on building exceeding 10mtr but n.exc. 20mtr height. Applying two coat of exterior emuslion paint/weather proof paint over a coat of primer complete all as specified and directed. |
| 52 | M&L for preparation of old decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed.Note:- Exterior emulsion paint to be done by Roller. |
| 53 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 54 | M&L for roughening surfaces of old/concrete floor by picking, sweeping clean and washing down with water complete all as specified and directed. |
| 55 | M&L for 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4, using WPC, complete all as specified and directed. Note:- WPC shall be measured and paid separately under respective item @ 200ml per bag of cement) |
| 56 | M&L for APP modified roof treatment over existing accessible RCC roof slab/chajjah/canopy/ parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed as following works:- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density of 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm reinforced with non-woven polyster fiber of weight not less than 160 gsm/sqm using butane torch by torch application with 10 cm side laps and 15 cm end lap, complete all as specified and directed. |
| 57 | M&L for PCC padding 1:2:4, type B-1(using 20 mm graded crushed stone aggregate) of average thickness 50 mm to be provided in slope fixed with chicken wire mesh, complete all as specified and directed. |
| 58 | M&L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green in squares of 300 x 300 mm, complete all as specified and directed. |
| 59 | Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girth, complete all as specified and directed. |
| 60 | M&L for filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed. |
| 61 | M&L for two coats of hot bitumen on newly plastered surface of sunken portion not less than 1.2 Kg/Sqm complete all as specified and directed. |
| 62 | M&L for plasteing in cement mortar (1:3) 15mm thick with WPC (200ml per bag of cement) on walls/ floor as on sunken floor finished even and smooth using extra cement,complete all as specified and directed. Note:- After plaster, testing be carried out in the sunken portion by ponding for 72 hrs before further treatment to check any leakage/seepage. If observed shall be rectified without any extra cost |
| 63 | Demolition reinforced cement concrete of any description and in any position not otherwise specifully provided for complete all as specified and directed. |
| 64 | M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 65 | Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed. |
| 66 | S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 67 | Taking up or down, steel tubing 15mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed. |
| 68 | Taking up or down, steel tubing 20mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed. |
| 69 | S&F of 25mm dia of CPVC Pipes SDR 11 & plain CPVC SDR 11 fitting on walls/celling or laying in floor complete all as specified and as directed. |
| 70 | S&F of 20 mm dia of CPVC Pipes SDR 11 & plain CPVC SDR 11 fitting on walls/celling or laying in floor complete all as specified and as directed. |
| 71 | S&F of brass elbow for 20 mm dia CPVC pipe SDR11 & plain CPVC SDR 11 fitting; complete all as specified and as directed. |
| 72 | S&F of brass Tee for 20 mm dia CPVC pipe SDR11 & Plain CPVC SDR 11 fitting; complete all as specified |
| 73 | S&F of male brass threaded adoptor (MTA/MBTA) for 20 mm dia CPVC pipe SDR11 & plain CPVC SDR 11 fitting, complete all as specified and as directed. |
| 74 | S&F for vitreous china wash hand basin counter type, coloured and size not less than 630 x 450mm including waste pipe and coupling with a pair of CI brackets reqd for fixing, complete all as specified and directed. |
| 75 | S&F for soap dish, stainless steel, approximate size 160x 160x90mm complete all as specified and directed. |
| 76 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 77 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for dischage pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specified and as directed. |
| 78 | S&F of urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms).. complete all as specified and as directed. |
| 79 | S&F of vitreous china urinal partition white of size 310x700 mm. complete all as specified and directed. |
| 80 | S&F of coupled closet (one peace) EWC colour, bowl for coupled EWC with UF soft close slim seat cover, hinges, fixing accessories and accessories set size 380x660x765mm and cistern with cistern fittings complete all as specified and directed. |
| 81 | M&L for chromium plated long body bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe and fix to 15mm bore pipe fix as .complete all as specified and as directed. |
| 82 | S&F of angular pillar tap operated by foot with required footing arrangements and PVC connection reqd for fixing, complete all as specified and directed. |
| 83 | S&F of 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, complete all as specified and as directed. |
| 84 | S&F of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 85 | S&F of PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed. |
| 86 | S&F of PVC connection 15mm size with PTMT nuts of length 300mm complete all as specified and directed. |
| 87 | S&F of sheet glass shelf PTMT assembly consisting of 5.5mm thick sheet glass shelf 12cm wide fixed with incl chromium plated screw, bracket guard and ralling 60cm long complete all as specified and directed. |
| 88 | S&F of shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed. |
| 89 | S&F of tubular towel rail brass chromium plated D type 60cm long between flange complete all as specified and directed. |
| 90 | S&F of stop valve/ angle valve cast copper alloy bore dia of pipe 15mm screwed down high pressure with crutch or but trely handle screwed both ends for iron pipe and fixed but fancy type brass chromium plated complete all as specified and directed. |
| 91 | S&F of stop valve/ angle valve cast copper alloy bore dia of pipe 15mm screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed but fancy type brass chromium plated with long shank and cup (concealed type) etc complete all as specified and directed. |
| 92 | S&F of 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed. |
| 93 | S&F of PVC (SWR) Bends and radius of 75mm bore complete all as specified and directed. |
| 94 | S&F of PVC (SWR) junction single, (Single T) equal or unequal of 75m bore complete all as specified and directed. |
| 95 | S&F of PVC (SWR) 75mm floor trap or nahani trap, plain with grating, including jointing with cement solvent complete all as specified and directed. |
| 96 | S&F in repair PVC waste pipe 32mm bore for urinal/WHB complete all as specified and directed. |
| 97 | S&F of rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of existing PVC tank of any capacity complete all as specified and directed. |
| 98 | S&F of rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing tank of any capacity complete all as specified and directed. |
| 99 | S&F in repair, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 100 | S&F of 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. |
| 101 | Taking down rain water pipes (any size and pattern) , including all fittings, heads,shoes, benr, swan necks, etc removal from site (measured ocverall as fixed along the centre line or fittings and accessories) complete all as specified and directed. |
| 102 | S&F of PVC rain water pipe (SWR) 110mm dia (Single socketted in any length with rubber joints, fixed to walls with flat iron clamps(Flat iron clamp will be measured and paid separately )complete all as specified and directed. |
| 103 | S&F of bands, straps, clamp for supports or stays for rainwater pipe including bolts, if required hooks (Stay), clamp for securing rain water PVC Pipe, plate washer and similar articles for fixing to wall complete all as specified and directed. |
| 104 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed. |
| 105 | M&L in repair for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box complete all as specified and as directed.Note :- Sunken box , hylam plate will be measured and paid separately |
| 106 | One light point controlled by one, one way switch |
| 107 | One fan point controlled by one, one way switch |
| 108 | One socket outlet 3 Pin, 5 Amp on independent board |
| 109 | One socket outlet 3 Pin, 5 Amp on same board. |
| 110 | One bell point controlled by one bell push |
| 111 | - ditto - all as per item No. 104 here in before but 2.5 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board |
| 112 | - ditto - all as per item No. 104 here in before but 4.0 Sqmm P.V.C insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 113 | S&F in repair switch piano flush type single pole one way 6 Amp (ISI Marked) |
| 114 | S&F in repair switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 115 | S & F in repair bell push flush type 5 amp |
| 116 | S&F in repair socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) |
| 117 | S&F of socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 118 | S&F of ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate, isolated body (ISI Marked) |
| 119 | S&F in repair LED batten tube light (4ft) for surface and pendant applications.18/ 20 watt, Colour Temp 3000 K 5000 K all as directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender