Tender For Annual Maintenance Programme Of B/R For The Fy 2026-27 For Lekhanagar Jabalpur (Maint Work Md Accn At Lekhanagar) Under Ge (East) Jabalpur
Tender Value
49.86 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
2 days left
EMD
99730
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Programme Of B/R For The Fy 2026-27 For Lekhanagar Jabalpur (Maint Work Md Accn At Lekhanagar) Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 5 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 6 | S&F for MS steel flat iron as in wind tie for roof sheet including securing bolts (Fe-290 E-165) complete all as specified and directed. |
| 7 | Excavation in post holes (or similar holes) each not exceeding 0.50 cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance not exceeding 50 m & making good surface complete all as specified and directed. |
| 8 | M&L for cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 9 | Dismantling of wall & ceiling Boards ( fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 10 | S&F for powder coated aluminium snap grid frame work for false ceiling with aluminium angle 25 mm x 25 mm x 1.5 mm fixed to perimeter of wall, main 'T' runner 38 mm x 25 mm x 1.5 mm and secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed. |
| 11 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed. |
| 12 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification. Complete all as specifed and directed |
| 13 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc as in cement mortar complete all as specified and directed. |
| 14 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 15 | M&L for Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of 15mm thick in CM 1:6 complete all as specified and directed. |
| 16 | M&L for Vitrified ceramic tiles 8 mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 17 | M&L for Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of 15mm thick in CM 1:6 complete all as specified and directed. |
| 18 | M&L for Vitrified ceramic tiles 8 mm thick area of each tiles exceeding 0.42 sqm not exceeding 1.00 sqm in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 19 | M&L for joints free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 20 | M&L for Non skid ceramic colour tiles7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 21 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | M&L for Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 23 | M&L for exterior parking tiles (endura) of design as approved, 10 mm thick, (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 24 | M&L for exterior wall tiles (endura) of design as approved (square/rectangular) area of each tile 350x450x8-10mm/350x250x8-10/450x350x8-10mm thick wall skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 10 mm thick rendering of 1:4 cement mortar for laying in wall finishes complete all as specified and directed. |
| 25 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | M&L for Kota stone slab 20-25mm thickin riser steps, skirting or dadao and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed. |
| 28 | Rounding to edges of stone slab on edge, such as in steps, cooking platform & other similar situations, complete all as specified and directed |
| 29 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 30 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 31 | Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 32 | M&L for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course average thick 25 mm, to match the undulations of roof complete all as specified and directed. |
| 33 | M&L for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed. |
| 34 | M&L for fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed. |
| 35 | M&L for APP based polymeric membrane minimum weighing 3.50 kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 160 gm/sqm) laid over primed surface including bituminous primer conforming to IS-3384-1965 applied @ 0.3 ltr/ Sqm by forced application complete all as speficied.Four course roof treatment consists of as under :-(i) Applying one coat of bituminous primer conforming to IS-3384-1965 @ 0.30 ltr/Sqm.(ii) laying APP based membrane as specififed.(iii) Applying a layer of blown grade bitumen 85/25 @ 1.2 Kg/Sqm conforming to IS : 702 (iv) Concrete cement concrete tiles shall be measured and paid separately. |
| 36 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced complete all as specified and directed. Three course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm.(b) Laying of APP based membrane as specified thickness and weight.(c) Applying two coat of aluminium paint @ 100ml/sqm. |
| 37 | M&L for Cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing joints shall be filled with grey cement and no pigments compound complete all as specified and directed. |
| 38 | Taking down chowkhat n. exc 1.5 sqm each without taking off shutter from frame complete all as specified and directed. |
| 39 | Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking off shutter from frame complete all as specified and directed. |
| 40 | Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 41 | Taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 42 | Resecuring or easing and adjusting without taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 43 | Resecuring or easing and adjusting without taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 44 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 45 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/sqm including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 46 | S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 47 | S&F for 4 mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 48 | S & F for powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete. Note Size of aluminum sections are as under :-(i) Shutter vertical section - Jindal main – 2010 Section No 20606.(ii) Shutter top & bottom - Jindal main – 2010 Section No 20604(iii) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.Note : 4 mm thick tinted glass and wire cloth shall be measured and paid separately. |
| 49 | M&L for Anodised Aluminium grill (Anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design /pattern with approved standared section and fixed to the existing window frame with CP Brass / Stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handle and fixing approved anodised aluminium standard section around the opening all complete as specified and directed. |
| 50 | S&F for 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 51 | S&F for Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty or with necessary clip or clamp, screws etc in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 52 | S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 53 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 54 | M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed. |
| 55 | S & F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 56 | M&L for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 57 | S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 58 | S&F for 35 mm thick second class hardwood factory made glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. wihout sash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed. |
| 59 | S & F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 60 | S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 61 | S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed. |
| 62 | S&F (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified. |
| 63 | S&F (factory made) steel windows/ventilators with top hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified. |
| 64 | S&F for 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed. |
| 65 | S&F in repair, door seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed. |
| 66 | S&F in repair, 40 mm dia, cupboard knobs & curtain rod knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 67 | S&F in repair, 75 mm size, hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws complete all as specified and directed. |
| 68 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 40 mm complete all as specified and directed. |
| 69 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 70 | S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 71 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 72 | S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 73 | S&F 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 74 | S & F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 75 | S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 76 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 77 | S&F in repair 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 78 | S&F in repair 150mm size extruded alluminium alloy handle fabricated type anodaised complete all as specified and directed. |
| 79 | S&F in repair 150mm size extruded brass handle fabricated type polished complete all as specified and directed. |
| 80 | S&F in repair 300mm size Length alluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed. |
| 81 | S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 82 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.etc., complete all as specified and directed. |
| 83 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified |
| 84 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified. |
| 85 | S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified. |
| 86 | S&F for 4.8mm thick figured glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified. |
| 87 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 88 | M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 89 | M&L for 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. (WPL shall be measured and paid separately) |
| 90 | M&L for Applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 91 | Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 92 | Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 93 | M&L for old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed. |
| 94 | M&L except brick work with old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius obtianed from the demolition and built in CM 1:6 complete all as specified and directed. |
| 95 | M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L for 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately). |
| 97 | Material & labour for 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed. |
| 98 | Supply only liquid water proofing compound complete all as specified and directed. |
| 99 | M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 100 | S&F MS framed work confirming to FE-290 ( Gde E-165) as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. |
| 101 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 102 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 103 | S&F for 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 104 | S&F for 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 105 | Refixing old steel tubing and connections in new or old positions (wall, ceiling, floor etc) of 15mm bore of pipe complete all as specified and directed. |
| 106 | Refixing old steel tubing and connections in new or old positions (wall, ceiling, floor etc) of 20mm bore of pipe complete all as specified and directed. |
| 107 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 108 | S&F 500 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top), minimum triple layer, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed and including taking down 500 ltrs capacity water tanks and removing to store complete all as specified and directed. |
| 109 | S&F for 1000 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top), minimum triple layer, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed and including taking down 1000 ltrs capacity water tanks and removing to store complete all as specified and directed. |
| 110 | Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 ltr capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed. |
| 111 | Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 250 and n.exc 500 ltr capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed. |
| 112 | S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 113 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed. |
| 114 | S&F in repair 15mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed. |
| 115 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 116 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed. |
| 117 | S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed. |
| 118 | S&F 110 mm bore PVC (SWR) bends complete all as specified and directed. |
| 119 | S&F 75 mm bore PVC (SWR) bends complete all as specified and directed. |
| 120 | S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 121 | S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 122 | S&F 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 123 | S&F 75 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 124 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 125 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 126 | S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 127 | S&F in repairs 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 128 | S&F for PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 129 | S&F for PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 130 | S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm dia fixed complete all as specified and directed. |
| 131 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed. |
| 132 | S& F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 133 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified. |
| 134 | S&F in repair internal fitting for 10 ltrs capacity PVC valveless syphonic action type flushing cistern complete all as specified and directed. |
| 135 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets complete all as specified and directed. |
| 136 | S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm including brackets complete all as specified. |
| 137 | S&F in repairs sinks made of stainless steel 1 mm thk kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160MM complete all as specified and directed. |
| 138 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thk kitchen or laboratory with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X 330 mm X 160MM complete all as specified and directed. |
| 139 | S&F in repairs 1mm thick stainless steel plate rack of overall size 24 Inch x 36 Inch x 10 Inch including fixing with rawal plug and screws. Complete all as specified and directed |
| 140 | S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed. |
| 141 | S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted. |
| 142 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by Engr-in-Charge. |
| 143 | S&F in repairs 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 144 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 145 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 146 | S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed. |
| 147 | Supply and fix 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 148 | Supply and fix in repair 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 149 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 150 | S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops , rollers etc complete all as specified and directed. |
| 151 | S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 152 | S&F in repairs Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) all as specified and as directed. |
| 153 | S&F in repair 15 mm dia CP health faucets including all neceesary fittings specifictions all as specified and directed. |
| 154 | S & F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed. |
| 155 | S&F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 156 | S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 157 | Supply and fix in repairs 20mm bore ball brass valve, high pressure with polythene float and flynut complete, scrwed for iron pipe or brass ferrule fixed in repair complete all as specified and as directed. |
| 158 | Demolition of cement concrete (un reinforced) in ground floor and pavings n.exc 15cm thickness (below or above GL) complete all as specified and directed. |
| 159 | M&L for PCC 1:4:8 type D2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed. |
| 160 | M&L for PCC 1:2:4 type B1, 100mm thick using 20mm graded aggregate and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 161 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 162 | M&L for 60 mm thick glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of M-35 grade complete all as specified and directed. |
| 163 | M&L for 80 mm thick factory made rubber made glossy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of M-40 grade complete all as specified and directed. |
| 164 | M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 165 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (40mm graded aggregate) finishing the surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 166 | Material & labour for preparation of new plastered surfaces of celling and applying three coat of white lime wash complete all as specified and directed. |
| 167 | M&L for preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed. |
| 168 | M&L for preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming complete all as specified and directed. |
| 169 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 2 mm thick wall care putty complete all as specified and directed. |
| 170 | M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed. |
| 171 | M&L Preparation of old surfaces of plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 172 | Complete removal of existing treatment of wall surfaces of brick or concrete suraces, pillars, cornices and similar and applying two coats distmper oil emulsion over a coat of primer and avg 2 mm thick wall care putty at any height including necessary scaffolding complete all as specified and directed. |
| 173 | Complete removal of existing treatment over wall surces of brick or concrete, pillar, cornices etc at any height including necessary scaffolding etc and applying two alkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 174 | M&L for preparing old steel surfaces of any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified and directed. |
| 175 | M&L for preparing old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 176 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided forcomplete all as sepecified and directed. |
| 177 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 178 | Returning filling in including, spreading, levelling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 179 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 180 | M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 181 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surfaces of concrete complete all as specified and directed. |
| 182 | M&L for RCC nominal mix 1:2:4 (20 mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams, plinth beams bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed. |
| 183 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchians to rough finished surfaces of concrete complete all as specified and directed. |
| 184 | M&L for RCC nominal mix 1:2:4 (20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 185 | Use & Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete completed all as specified and directed. |
| 186 | M&L for RCC 1:2:4 nominal mix (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 187 | M&L for TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking ends and binding with and including mild steel (annealed) wire not less than 0.90 mm dia complete all as specified and directed. |
| 188 | All as per item 187 here-in-before but 8 mm dia and above upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed. |
| 189 | S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed |
| 190 | S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed. |
| 191 | S&F in repair, Toilet paper holder with flat recessed type stainless steel, complete all as specified and directed |
| 192 | S&F in repairs Mortice lock,vertical type size 100 mm 4 lever complete all as specified and directed |
| 193 | S&F in repair aluminium (Die cast) body door closer hydrau lically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete as spacified and directed by Engineer-in-charge. |
| 194 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 195 | S&F in repair Chromium Plated Grating 100mm dia with waste hole fixed on floor trap, nahani trap etc complete all as specified and directed |
| 196 | S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc for any size of opening complete all as specified and directed. |
| 197 | S&F in repair PVC tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 ltr capacity fixed in position with nuts and bolt complete all as specified and directed |
| 198 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 199 | S&F in repairs concealed stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 200 | Cutting all grass, vegetation & wild bushes, surface dressing around the Septic Tank/Soak Well/Manholes to a distance of 2 metre all around and removing excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified and directed. |
| 201 | M&L for Cleaning and removing shrubs plants from roof, chajja, facia or brick wall complete with roots and providing anti vegitation growth chemical spray at any height and making good in CM 1:4. Complete all as specified and directed. Note : All vegetation & plants including their roots for the particular area shall be totally removed. Any damage to the surface shall be repaired either by Plaster in CM 1:4 & Brick Work in CM 1:6 or PCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) as on required basis. Unit rate quoted to be deemed inclusive of these aspects. |
| 202 | Providing and fixing decorative box type letters made out of 1.2 mm to 1.5 mm thick brass sheet having letter height from 300 mm to 450 mm (12 inch to 18 inch), with suitable depth of 50 mm to 75 mm, fabricated by cutting, bending, shaping, welding/brazing and grinding complete. The surface of letters shall be machine polished with mirror/matte finish as approved. Letters shall be fixed over ACP sheet cladded gate/frame using stainless steel studs, screws, spacers, nylon sleeves, epoxy adhesive and necessary fixing arrangement including preparation of template, alignment, scaffolding, transportation, loading/unloading and all labour, tools and plants complete in all respects as per approved design and direction of Engineer-in-Charge. |
| 203 | M&L for 3 mm thick colour ACP sheet in strips & channel feathered at the edges for fixing on ALUMINIUM solid Wall Lining inclusive of all fixture all as speified & directed by Engr in Charge. |
| 204 | Mirror polishing on marble/granite/kota stone work where ever required to give high gloss finish complete |
| 205 | M&L for providing precast RCC jallies type B-0 (1:2:4) (12.5mm graded aggregate) as in louvers and jallies, 50mm thick (measured solid) set CM 1:4, including all mouldings but excluding frame complete all as specified and directed. (Steel TMT bars shall be measured and paid seperately) |
| 206 | Schedule of credit amount of Rs 79,152.35 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender