Tender For - Provision Of Bcr At Admin At Af Stn Bhowali.
Tender Value
9.72 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
7 days left
EMD
19400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for - Provision Of Bcr At Admin At Af Stn Bhowali.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and as directed. |
| 2 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard soil/dense soil/existing surface complete all as specified and directed. |
| 3 | Removing excavated materials n. exc. 50 m and depositing were directed at a level n exc 1.5 mtr above the staring point complete as specified and as directed. |
| 4 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed |
| 5 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 6 | M&L for hard core of gauge n.exc 63mm , degorited spread and levelled in layers n.exc 15mm thick watered and rammed to a tree surface with broken stone or boulders complete all as specified & as directed.. |
| 7 | M&L 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors finished even & smooth using extra cement in patches, complete all as specified and directed. |
| 8 | M&L Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed. |
| 9 | All as per above item no-08 but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed. |
| 10 | M& L for Cement concrete type E-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 11 | M& L for RCC in Nominal Mix type B1 1:2:4 (20mm graded aggregate) foundations, including, rafts, footings, foundation beams (Plinth beam), bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed |
| 12 | M&L for Reinforced cement Concrete (Nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in columns , pillars, piers, posts and struts etc. complete all as specified and directed. |
| 13 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 20mm graded stone aggregate as in beams, (Lintel and roof) cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 14 | M&L for RCC in Nominal Mix type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 15 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed |
| 16 | M&L for formwork to sides of pillars, posts, struts, piers, columns etc square or rectanguar complete all as specified and directed |
| 17 | M&L for formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed. |
| 18 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed. |
| 19 | Supply and fixing TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 20 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders complete all as specified and directed. |
| 21 | M&L Fly ash brick with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 22 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M & L rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified and directed. |
| 25 | Material & Labour for preparation of new external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 26 | M&L for prepareation of new internal surfaces of wall and applying oil emulsion with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work.,over a coat of primer all as specified and directed. |
| 27 | M & L applying two coat of white wash on newly plastered ceiling surfaces including preperation of surfaces, complete all as specified and directed. |
| 28 | M&L for Applying wall care putty on new wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes as complete all as specifed and directed |
| 29 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0 complete all as specified and as directed |
| 30 | M&L two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth complete all as specified and directed. |
| 31 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. complete all as specified. |
| 32 | Providing and fixing factory made uPVC white colour fixed window for grills made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass complete all as specified. |
| 33 | M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame / ant other door frame and holdfasts including necessary farmwork etc. complete all as specified |
| 34 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturercomplete all as specified and directed. |
| 35 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 36 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.complete all as specified and directed. |
| 37 | S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc.complete all as specified and directed |
| 38 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed |
| 39 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed |
| 40 | S&F alluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 250 mm long etc all as specified and directed |
| 41 | M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 42 | M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified. |
| 43 | M&L Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed. |
| 44 | S&F aluminium anodised alloy curtain rails 20mm dia fixing with brackets, stops, rollers khob lattu etc complete all as specified and directed. |
| 45 | M&L for Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside Af Stn .complete all as specified and directed. |
| 46 | M&L PCC 1:2:4 type B1 using 40 mm graded stone aggregate as in concrete padding laid to required slope incl finishing the concrete surface fair and even without using extra cement complete all as specified and as directed. |
| 47 | M&L for Apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface, complete all as spectified and directed. |
| 48 | M&L APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method complete all as spectified and directed. |
| 49 | M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces complete all as specified and directed. |
| 50 | M&L for 25mm thick PCC 1:2:4 Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed |
| 51 | M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified and directed |
| 52 | S & F Solid PVC Wall Lining consisting of 5mm thick wood grain prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed |
| 53 | S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per SSR Part I specifications and drawing complete. complete all as specified and directed |
| 54 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Circular Pipe, Sqaure pipe,I section,Beam, tee, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A) complete all as specified and directed |
| 55 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedcomplete all as specified.and directed |
| 56 | M&L for sand cushioning for Machine pressed precast concrete interlocking paver block including watering and consolidation complete all as specified and directed. |
| 57 | M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade including taking out of old damaged interlocking paver block.complete all as specified and directed. |
| 58 | S & F of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with with Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long as in complete all as specified and directed. |
| 59 | S & F of 4mm Non asbestos fibre cement building boards fixed or laid /inserted to timber/GI/Aluminium frame work and fixed in ceiling flat or sloping as in complete all as specified and directed. |
| 60 | S&F PVC Ceiling Lining (False Ceiling) Incl Frame work for PVC Ceiling Consisting of 5mm thick Plain Colour PVC Sheet 8 to 10mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as spcd (Note :- Framework inclusive in above item and not to be paid separately.) complete all as specified and directed. |
| 61 | S & F for Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specfied and directed |
| 62 | S & F for Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250V, 2P+ earth complete all as specfied and directed |
| 63 | Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including stove enamelled steel conduit (concealed conduit) on stone/Brick Bldg conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified. complete all as specified and directed. |
| 64 | All as per serial item No. 63 here-in-above but for one switch socket & plug combined outlet on independent board with 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour drawn through stove enamelled steel conduit (concealed conduit) complete all as specified. |
| 65 | M & L for flame proof LED light fitting 1x16 Watt, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specfied and directed |
| 66 | S&F Exhaust fan, metalic body AC single Phase. 230V of size 300m sweep with, blades, frame and louvers complete including necessary wall/core cutting all as specfied and directed |
| 67 | S&F Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way vertical type double door, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified. |
| 68 | S& F for MCB 63A TPN 415 Volts,'C' Curve complete all as specfied and directed |
| 69 | S & F for MCB 32A SP 240 Volts , 'C'curve complete all as specfied and directed |
| 70 | S & F for MCB 32A SPN , 240 Volts , C Curve complete all as specfied and directed |
| 71 | S & F for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25X4 MM by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specfied and directed including necessary earth work. |
| 72 | Supply and laying of cable XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded Size of 25 sqmm x 3.5 core including taking down old cable complete all as directed |
| 73 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in soft /loose soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed. |
| 74 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers n . Exc 25 cm complete all as specified and directed. |
| 75 | Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 76 | Supply and laying HDPE pipe 50 MM Dia for cable protection complete all as specfied and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender