Tender For Repair To Chhajja Parapet Grouting Plaster And Other B/R Items In Pocket 1 To 4 Of Age B/R-I Under Ge Roorkee.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Chhajja Parapet Grouting Plaster And Other B/R Items In Pocket 1 To 4 Of Age B/R-I Under Ge Roorkee.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note:- Neccesary formwork and reinforcement will be supplied and fixed by the contractor and the cost of these are deemed to be included in the rates quoted by the contractor and contractor have to inform the department one day in advance after binding of reinforcement otherwise no payment will be considered on this account) |
| 2 | M & L for repairing existing RCC structure work by gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaffolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing position as directed |
| 3 | M&L for rendering 15mm thick rendering on roof surface including flashing and junction of parapets etc finished even and smooth in cement mortar (1:4) including water proofing proofing compound 200 ML per cement bag(50 kg) after brushing cement slurry including taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick in cement mortar 1:6 of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement including all necessary scaffolding including taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick rendering in cement mortar 1:4 on fair face of brick work/ concrete surfaces of wall with water proofing admixture finished even and smooth without using extra cement (WPC will be measured and paid separatly) including all necessary scaffolding arrangments of any height including taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for rendering 10 mm thick plastering in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface including all necessary scafffolding including taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 7 | M&L for preparation of new surfaces and apply two coat of Oil bound distemper over a coat of primer to walls by using roller complete surfaces on walls complete all as specified and directed |
| 8 | M & L for preparation of New Plastered or unplastered surfaces of ceiling and applying three coat of white wash by using roller complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of primer on walls of any colour by using automatic airless spray complete all as specified and directed |
| 10 | M&L for applying Two coats of 100% Premium acrylic emulsion paint by using automatic airless spray machine having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall/ceiling of projection/chajja. , of approved make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Note:- (i) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee for 05 years by the contractor. The authorised applicator of manufacture shall be got approved from GE before commencement of work. (ii) All the material to be incorporated on the work shall be brought by contractor to MES store yard which will be subsequently issued by department for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iii) After carrying out preparation of surface the same shall be got approved from GE before application of primer and paint for each building.(iv) The colour/shade will be all as approved by GE.(v) The cost of scaffolding alongwith necessary arrangement wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed. The work shall be executed at a height from ground floor up to 15m (max).(vi) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction to the satisfaction of Engineer-in-Charge before application of exterior paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.(vii) The application of acrylic paint/ weather coat shall be with fully automatic airless spray machine with a flow speed of min 1 litre per minutes having pressure of 3300 PSI by allowing 6 to 8 hrs to dry the surface before painting of subsequent coat. However, where it is not possible to apply acrylic paint by using the spray machine the work will be carried out manually by using roller.(viii) 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. |
| 11 | Material & Labour for applying one coats of 100% Premium acrylic emulsion paint by using automatic airless spray having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces including complete removal of existing surfaces |
| 12 | Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls, preparation of surface and applying two coats of interior oil bound distemper with smooth roller finish over 1 mm thick putty and a coat of primer ,complete all as specified and directed.MAKE: (a) Paint : Asian Paint Aqualock or Berger Bison Acrylic Emulsion or equivalant in Nerolac/Royale.Note:- Roller for painting internal surfaces shall be used alongwith necessary scaffolding & necessary arrangement |
| 13 | M&L for preparation of old decorated surfaces of walls incl cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of cement base paint by using automatic airless spray machine complete all as specified and directed |
| 14 | S & F in repairs steel water tubing of size 15mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and as directed |
| 15 | S & F in repairs steel water tubing of size 20 mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and directed |
| 16 | M&L for cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and as directed |
| 17 | S & F in repairs 10 litres capacity, premium Push Button Type Flushing Cistern Dual 10 LTR Cistern low level slim, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve float vavle and other connected accesories including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed |
| 18 | S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed |
| 19 | S & F in repair 15 mm bore, fancy type, concealed stop cock (regular body) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed |
| 20 | S & F in repair brass chromium plated ,15 mm bore, fancy type, sink cock( wall mounted) with 150mm long swell spout, wall flange and provision of WP connection, cast copper alloy with fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 21 | S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule including telephonic shower complete all as specified and directed |
| 22 | S & F in repair for 3 in 1 system with provision for both hand shower and overhear shower complete with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator with telephonic shower and fixing telephonic shower with wall mounted crutch (Holder/bracket) complete all as specified and directed |
| 23 | S & F in repair 15 mm bore, fancy type, health faucet with SS hose complete all as specified and directed |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour / length having tensile strength of 550 MPA AZ-150 as in roof coverings/cladding having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including steel scaffolding of any height including dismantling old asbestos sheets of any description, any location complete all as specified and directed. |
| 25 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA AZ-150 as in roof coverings/cladding having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including steel scaffolding of any height including dismantling old asbestos sheets of any description, any location complete all as specified and directed. |
| 26 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-24 including dismantling Old unserviceable existing wrought iron work complete all as specified and directed. |
| 27 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with necessary pvc bends/pvc T , including dismantling of pipe any dia or type and complete all as specified and as directed |
| 28 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, including dismantling of pipe any type or dia complete all as specified and as directed |
| 29 | S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof. |
| 30 | M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finishes with and incl material and labore in rendering in CM 1:4 mixed with & including water proofing compound @200ml/50 kg of cement /PCC 1:3:6 type B0 (using 12.5mm graded stone aggregate)/Brickk work in CM 1:4 as required at site and directed |
| 31 | Supply & fix in repair 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 32 | Supplying and laying of CPVC 20mm outer dia pipes (concealed) SDR 11 & Plain CPVC SDR 11, with all fittings (including brass fittings/fixtures) and fixed on walls/ceiling (concealed) or laying in floors Including taking up or down old steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed |
| 33 | Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors Including taking up or down old steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed |
| 34 | Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed. |
| 35 | Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed. |
| 36 | M & L for solid PVC walllining consisting of 5 mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing of site on PVC frame as per specification and drawing |
| 37 | M & L for 5mm thick PVC sheet fillet of width fixing on to wall to make PVC frame as specification and drawing |
| 38 | S&F joint, channel, angle, tee sections, & MS flats fixed independently, without connection plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E-250) quality-Acomplete all as specified and directed. |
| 39 | S & F in repair tank lid/ cover made out of with 0.63mm thick PGI sheet, 470mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkeys menace complete as per sample, complete all as specified and directed. |
| 40 | M&L for roof treatment with polymeric membrane (APP based) with non woven polyester mat as reinforcement with following:-(a) M&L for surface preparation by removal/taking down of existing treatment of tar felt/tiling/loose particle to ensure or clean smooth and dry surface and preparing the surface.(b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface.(c) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fiber as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction.(d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction.(e) M&L for providing test with filling of water over roof slab continuously for 48 hours all as specified and directed.(f) M&L for providing template of size 450 x 450 mm to each bldg where roof treatment is carried out with marking CA No, date of roof treatment, expiry date, etc all as specified and directed.(g) M&L rendering 15mm thick in CM 1:3 mixed with WPC on roof surfaces finished even & smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid separately.(h) (d) M&L for providing 25mm cement concrete type B0 1:2:4 (12.5 graded aggregate) in roof kerbs, roof levelling or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 41 | M&L for acrylic polymer modified cementitious two-component waterproof coating comprising liquid acrylic polymer and cement-based powder component, mixed and applied in two or more coats over properly prepared concrete/masonry surface, including cleaning of surface, treatment of minor cracks and honeycombs, curing as recommended by manufacturer, complete all as specified and directed. Waterproof coating shall possess excellent adhesion, flexibility, crack-bridging properties, resistance to water penetration and elongation of not less than 80%, equivalent to Dr. Fixit Pidifin 2K |
| 42 | M&L for preparation of surface by cleaning, removing dust, loose particles and other deleterious matter, making the surface smooth and even by carrying out necessary PCC work and/or cement-sand rendering as required, including treatment of minor cracks, honeycombs, corners and junctions, and applying high-performance polymer modified two-component cementitious waterproof coating in two coats over concrete/masonry surfaces, complete all as specified and directed. Coating shall possess elongation of minimum 120%, crack-bridging ability up to 2 mm, applied at an average dry film thickness of 1.5 mm (1500 microns) with a coverage not exceeding 0.56 sq m/kg (approximately 6 sq ft/kg) for the complete system including all labour, tools, scaffolding and incidentals required for proper application,. Waterproofing coating shall be equivalent to Dr. Fixit Fastflex or approved equivalent make |
| 43 | M&L for preparation of waterproofed roof surface and applying heat-reflective elastomeric roof coating system comprising one coat of self-priming coat followed by two coats of high solar reflectance roof coating, complete all as specified and directed. Coating system shall provide elongation of minimum 100%, total dry film thickness of 500 microns, with coverage not exceeding 2.04 sq m/litre per coat (approximately 22 sq ft/litre/coat), including all labour, tools, scaffolding and incidentals required for proper application, equivalent to Dr fixit Roofseal Top Coat or approved equivalent make |
| 44 | M&L for preparation of concrete/masonry surface by cleaning, removing dust, laitance, loose particles and other deleterious material and applying Styrene Butadiene Rubber (SBR) latex based waterproofing coating in two coats, consisting of a mixture of 1 part URP and 1.5 parts cement by weight, over properly prepared surfaces, including treatment of minor cracks, honeycombs, corners and junctions, complete all as specified and directed. SBR latex shall have solid content of not less than 38%. The coating system shall be applied in two coats at a coverage of 2.0 to 2.2 sq m per kg for the complete treatment and shall achieve a minimum dry film thickness (DFT) of 300 microns. The waterproofing coating shall be equivalent to Dr. Fixit URP or approved equivalent make, complete all as specified and directed |
| 45 | M&L for preparation of concrete/masonry surface by cleaning, removing dust, dirt, loose particles, algae, fungus and other deleterious matter and applying an exterior waterproofing and protective coating system comprising one coat of acrylic based primer/sealer, one coat of waterproofing base coat and one finishing coat of weather-resistant protective coating, complete all as specified and directed. The coating system shall be composed of high-emulsion polymer, weather-durable pigments, properly selected and graded fine fillers, additives and biocides, providing protection against water ingress and weathering. The complete system shall be applied in three coats and shall achieve a minimum dry film thickness (DFT) of 180 microns. Coverage shall be 6.0 to 6.5 square metres per litre per coat or as recommended by the manufacturer. Primer/sealer shall be equivalent to Dr. Fixit Primeseal, waterproofing base coat shall be equivalent to Dr. Fixit Waterproof Coating and finishing protective coat shall be equivalent to Dr. Fixit Raincoat Classic or approved equivalent make, complete all as specified and directed |
| 46 | M&L for dark shade vitrified tiles, first quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and not exc 1.00 Sqm, in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding/plaster in cement mortar (1:6) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed |
| 47 | M&L for dark shade, vitrified tiles, first & Premium quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm and not exc 1.00 Sqm, in vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding /plaster in cement mortar (1:6) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed |
| 48 | M & L for dark shade, double/ultra charged vitrified tiles, first & Premium quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm , in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed |
| 49 | M & L for dark shade, double/ultra charged vitrified tiles, first & Premium quality, conforming to IS-13006/EN/176 group B1a, 8, to 10mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm , in vertical set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding /plaster in cement mortar (1:6) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed |
| 50 | M & L for non skid coloured ceramic tiles, joint free, conforming to IS-13755, group B II(b) , 1st & premium quality, Digital coloured ceramic tiles n exc 0.16 but x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and directed |
| 51 | M&L for taking down and resecuring or easing & adjusting, shutters of any description, exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.Note :-Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. |
| 52 | S & F in repair of 25 mm dia stainless steel fancy type curtain rod with and including stainless steel fancy type brackets/ Nobs and side fancy type caps, stops, in suitable size and necessary rings, side caps etc. complete all as specified and directed. |
| 53 | M & L for glazed coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 300mm or 450x300x 6-7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) including dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and directed |
| 54 | M & L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6 mtr mean radius, built in CM 1:6 including demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removing debris out side MoD land complete all as specified and directed by Engg-in-charge. |
| 55 | M& L monkey proofing arrangment to PVC water tank lid by fabrication a sutiable frame and cover using Framed work as in doors or gates of angle or other section with lid with spicks for over head tank gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe 410-W (Gde E- 165) quality (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 56 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and Old unserviceable of any height complete all as specified and as directed |
| 57 | M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab,landing or in any position including Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender