Tender For Provn Of 01 X Toilet(Western Type), 2 X Urinal Pot & 1 X Whb With Water Tank Near Bldg No E-38 (Adm Block) At 309 Fd Hosp Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
3 days left
EMD
9000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 01 X Toilet(Western Type), 2 X Urinal Pot & 1 X Whb With Water Tank Near Bldg No E-38 (Adm Block) At 309 Fd Hosp Under Age B/R-Iii And Age E/M-Ii Of Ge (South) Meerut Cantt.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Ammendment in BOQ | BOQ | 28-Aug-2026 |
| 2 | 17-Aug-2026 | Amendment to critical dates | Date | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L Cement concrete in foundations, filling and mass, type D-2 1:4:8 using (40 mm graded stone agg) complete all as specified and directed. |
| 3 | M&L Brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed |
| 4 | M&L Brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed. |
| 5 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 6 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed. |
| 7 | M&L, TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 8 | All as per item No 07.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L Reinforced cement concrete (nominal mix),Type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 10 | M&L Reinforced cement concrete (nominal mix),Type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves/chajja and the like complete all as specified and directed. |
| 11 | M&L, rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) in cm (1:6) complete all as specified and directed |
| 12 | M&L, rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without usingextra lime or cement) in cm (1:4) complete all as specified and directed |
| 13 | M&L, rendering 5mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without usingextra lime or cement) in cm (1:4) complete all as specified and directed |
| 14 | M&L Preparation of new plastered/unplastered wall surfaces and applying 1.5 to 2mm thick wall care putty, complete all as specified and directed. |
| 15 | M&L Preparation of new plastered/unplastered wall surfaces and applying two coat of oil emulsion distemper(OBD) using roller, complete all as specified and directed. |
| 16 | M&L, Preparation of new plastered/unplastered wall surfaces and applying two coats of premium acrylic emulsion paint exterior weather coat using roller, complete all as specified and directed. |
| 17 | Preparation of New plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 18 | M&L, Hardcore of brocken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L, 100mm thick, Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in subbase complete all as specified and directed |
| 20 | M&L for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 and 25mm thick PCC 1:2:4, Type B1(using 20mm graded aggregate), Complete all as specified and directed. |
| 21 | M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 22 | S&F 15mm bore, Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 23 | All as per item No. 22 above but 20 mm bore pipe. complete all as specified and directed. |
| 24 | S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) with and including PVC ball valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipe or for brass ferrule, 20mm gun metal gate valve, etc hoisted and fixed in position all as specified in SSR Part I 2009 complete all as specified & directed. |
| 25 | S&F bib taps, cast copper alloy , fancy type, chromium plated, long body with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 26 | Supply & Fixing only centre hole wash basin mixer screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 27 | S&F angular stop cock/cocealed valve with wall flange, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed both ends for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 28 | Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed. |
| 29 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 55 cm long between flanges. complete all as specified and directed. |
| 30 | S&F stainless steel 3mm thick soap dish/plate of size 300 x 100mm, with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush complete all as specified and directed. |
| 31 | Supply and fixing PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed. |
| 32 | Supply and fixing vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and plastic water closet seat white/black but including flush pipe, connection to out going pipe and flushing pipe complete all as specified and directed. |
| 33 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 34 | Supply and fixing vitreous china wash basin white flat back size 580x 450mm excluding taps but including 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed. |
| 35 | Supply and fixed in repair vitreous china urinal, half stall type, white including grating and union for discharge pipe, waste pipe and chromium plated spreader 15mm bore, including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement complete all as specified and directed. |
| 36 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil. complete all as specified and directed. |
| 37 | Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point, complete all as specified and directed. |
| 38 | M&L, 75mm thick, Cement concrete type C2, 1:3:6 (40mm graded aggregate) as in plinth protection, laid in alternate bays and finished cement concrete even and smooth without using extra cemnt, complete all as specified and directed |
| 39 | Supply and fixing looking mirror 600x450 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed.. |
| 40 | M&L, 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 41 | M&L, PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified & directed. |
| 42 | S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 43 | S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 44 | S&F PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 45 | S&F PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 46 | S&F PVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed. |
| 47 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 48 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 49 | Supply and fixing 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed. |
| 50 | S&F 150mm long, extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed. |
| 51 | S&F 150mm long, aluminium anodised barrel tower bolts of extruded section. complete all as specified and directed. |
| 52 | Supply and fixing powder coated aluminium window/ventilator, openable type(double shutter, one glass and one wiremesh), frame and shutter made out of hollow extruded aluminium sections, as approved and fixed with and including 3 to 4mm thick tinted/froasted/black glass with glazing clips rubber beading/gasket, s/s wiremesh shutter, anodised aluminium beading screws, 100mm hinges, 150mm handles, and making provosion for fixing of exaust fan, cooler, etc complete all as specified and directed. |
| 53 | M&L cement concrete 1:5:10 type E-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 54 | M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 55 | M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in hold fast, filling in pressed steel chawkhat, window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match, including use of formwork, Complete all as specified and directed. |
| 56 | Cutting, Screwing existing steel tubing for alterations or additions for pipe bore 40-50mm in positionwithout taking down complete all as specified and directed. |
| 57 | Supply, fix 25 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 58 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable of IS 694 (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade not less tha 20mm dia with appropriate size with all fittings (ISI Marked) suitable for existing concealed conduit/new concealed wiring on stone/brick, masonary walls, roof etc including new CI/MS sunken box of required size and 3mm thick plastic laminated sheet for housing switches, sockets, regulators etc. complete with all fittings and accessories fixed to wall/ ceiling for one light point/fan point/bell point controlled by one oneway switches including one run 1.5 sqmm (nominal area) PVC insulated FRLSH unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site for :- (a) one light point controlled by one, one way switch 05/06 Amps. |
| 59 | All as per item Nos 58.00 here-in-before but one exhaust fan controlled by one, one way switch 05/06 Amps. |
| 60 | All as per item Nos 58.00 here-in-before but one 3 pin, 05/06 Amps socket outlet point on same board controlled by one, one way switch 05/06 Amps. |
| 61 | Supply and fixing switch piano flush type single pole one way 5/6 Amps complete all as specified and directed. |
| 62 | Supply and fixing socket flush type 5/6 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed. |
| 63 | Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete all as specified and directed. |
| 64 | Supply and fix LED light fitting 1x 22W, 220V, AC decorative box type with powdered coated aluminium housing & integrated electronic driver with THD<10%, 4KV surge protection and 120 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 65 | Supply and fix 35W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08, 10KV surge protection and having 130 lumen/watt including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed. |
| 66 | Supply and fix Sheet metal enclosure IP-43 double door for DBs (where MCBs are reqd) SPN 240 V, for 4 ways, complete all as specified and directed. |
| 67 | Supply and fix MCB SP 'C' series capacity of 06 to 32 Amps, 240 volts 50Hz AC supply, complete all as specified and directed. |
| 68 | Supply and fix MCB SPN 'C' series capacity of 32 Amps, 240 volts 50Hz AC supply, complete all specified and directed. |
| 69 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 70 | Supply and fix, laying, commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 6 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 71 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified and directed. |
| 72 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 73 | Supply & Laying 40 mm bore GI tubing, light grade, with all fittings of following sizes for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as specified and directed. |
| 74 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Aug 28, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender