Tender For Periodical Services In Various Buildings In Rs, Tipnis And 10 Afh Area And Repair/Maint Of Damaged Floor, Wall Tiles, Joinery Sunken, Sanitary Fittings, Plumbing Works, Cleaning Of Water Tanks And Allied Works In Rs Area & Tipnis Area At A
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
14 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services In Various Buildings In Rs, Tipnis And 10 Afh Area And Repair/Maint Of Damaged Floor, Wall Tiles, Joinery Sunken, Sanitary Fittings, Plumbing Works, Cleaning Of Water Tanks And Allied Works In Rs Area & Tipnis Area At Afs Hasimara
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : PERIODICAL SERVICES IN VARIOUS BUILDINGS IN RS, TIPNIS AND 10 AFH AREA AND REPAIR/MAINT OF DAMAGED FLOOR, WALL TILES, JOINERY SUNKEN, SANITARY FITTINGS, PLUMBING WORKS, CLEANING OF WATER TANKS AND ALLIED WORKS IN RS AREA & TIPNIS AREA AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkat with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm each and removing from site of work, complete all as specified and directed. |
| 3 | Taking down chowkat with shutter (without taking off shutter from the frame) n.exc. 1.5 Sqm each and removing from site of work, complete all as specified and directed. |
| 4 | Taking down shutter of any description n. exc. 1 Sqm each, complete all as specified and directed. |
| 5 | Taking down shutter of any description exc 1 & n. exc. 2 Sqm each, complete all as specified and directed. |
| 6 | Taking down shutter of any description n. exc 1 Sqm each and refixing in same opening, complete all as specified and directed. |
| 7 | Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each and refixing in same opening, complete all as specified and directed. |
| 8 | S&F 125 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 9 | S&F 105 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 10 | M &L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, filling in MS pressed steel door, hold fast blocks, fixing angle iron etc, including form work, complete all as specified and |
| 11 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 12 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed. |
| 13 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, as per specification & drawing, complete all as specified and directed |
| 14 | S&F factory made solid wire gauzed (i.e. panel will be of wire gauze) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail, i.e. panel will be of wire gauge. The wire gauge shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed. |
| 15 | S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed. |
| 16 | S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 17 | S&F 35mm thick (factory made), 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and directed. |
| 18 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm, fixed on floor, complete all as specified and directed. |
| 19 | S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 20 | S&F 75mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 21 | S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, complete all as specified and directed. |
| 22 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 23 | S&F 150mm long aluminum anodized barred tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F 150mm long aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 25 | S&F 200mm long aluminum anodized barred tower bolts of extruded section, complete all as specified and directed. |
| 26 | S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and directed. |
| 27 | S&F 18mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmet and similar work fixed with screws/self tapping screws etc, complete including required accessory and builder hardware, complete all as specified and directed. |
| 28 | S&F 25mm thick wooden grain PVC celuka ply for shutters of built in cupboards, almirahs, book cases, toilet boxes, racks and kitchen cabinet and similar work fixed with screws/self tapping screws etc. including required accessory and builder hardware (steel handle, hasp & staple, magnet), complete all as specified and directed. |
| 29 | S&F in repair 2nd class hard wood boarding, 15mm thick, clean sawn with butt joints fixed with nails in any positions and shelves of built-in cupboards including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed. |
| 30 | S&F 6mm thick plywood grade BWR type BB, fixed with nails to timber frame work in ceiling including dismantling of old unserveceable boarding of any description, complete all as specified and directed. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 32 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 33 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed. |
| 34 | S&F steel ventilator with top hung shutter (ISI marked), factory fabricated including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 35 | S&F powder coated (minimum thickness of coating 50 micron) aluminium ventilator partially fixed with 5 mm thick selected quality glass and partially flaps openable section with weight of frame not less then 1.17 kg/RM including handle cleat,glazing clip special auto lock dry set rubber gasket and frame fixed with stainless steel wiremesh outside the ventilator including necessary aluminium fittings required for fixing the same including making good the opening with and necessary putty/plastering/painting, as required, complete all as specified and directed. |
| 36 | S&F powder coated (minimum thickness of coating 50 micron) aluminium windows shutter with frame comprising of 3 track sliding window made out of aluminium extruded section of bottom frame of weight not less than 1.174 Kg/Rm, top and side frame of weighing not less than 1.174 Kg/Rm, the vertical styles of shutters of weighing not less than 0.423 Kg/Rm, top and bottom rail of shutters of weiighing not less than 0.368 Kg/Rm, in two pannels and shutter with and including 5mm thick selected quality tinted glass & third one with and incl stainless steel wiremesh and overall aluminium decogrill as approved by GE, fixed with standard aluminium channel out side, with and including handles, cleat, glazing clip, special auto lock, dry set rubber gasket, complete all as specified and directed. |
| 37 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 38 | S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm. in each pane, complete all as specified and directed. |
| 39 | S&F 3mm thick figured glass, pin headed type, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and directed. |
| 40 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described, exc. 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed. |
| 41 | S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanized wire staple in repair including wooden beads, complete all as specified and directed. |
| 42 | S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed. |
| 43 | S&F in repair curtain rod 25mm dia, mild steel chromium plated including CP bracket and other accessories for fixing of 25mm dia curtain rod to wall, complete all as specified and directed. |
| 44 | S&F in repair hasp & staple, safety type, brass with mild steel hing pin including bolt to hinge plate and fixed with screw 100mm, complete all as specified and directed. |
| 45 | M&L for preparation of new steel & iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed. |
| 46 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. |
| 47 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed. |
| 48 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately) |
| 49 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 50 | M&L for 5mm thick rendering on fair faces of ceiling, chajja, soffits etc, in cement mortar (1:3) finished even and smooth without using extra cement, complete all as specified and as directed. |
| 51 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 1.5mm to 2mm thick wall care putty to obtain a smooth surfaces including making good any undulation on the surfaces, complete all as specified and directed. |
| 52 | M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash, complete all as specified and directed. |
| 53 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 54 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 55 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 56 | Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 57 | Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 58 | S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.. |
| 59 | S&F steel water tubing and connection, medium grade, 15mm bore with all fitting, fixed concealed to wall or in ceiling through cutting chases, not exceeding 10cm girth, and making good surfaces with CM (1:3), complete all as specified and directed. |
| 60 | Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, fixed complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 61 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 62 | S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed. |
| 63 | Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 64 | S&F in repair 15mm bore, stop valves, fancy type, chromium plated, with long shank and cup concealed type, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or union and fixed, complete all as specified and directed. |
| 65 | S&F in repair 15mm bore angle stop valves, cast copper alloy, high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe, compelete all as specified and directed. |
| 66 | S&F in repairs of 15mm bore bib taps, cast copper alloy, chromium plated, high pressure, with crutch or butterfly handle, screwed down, screwed both ends for iron pipe or for brass ferrule, compelete all as specified and directed. |
| 67 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 68 | S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed. |
| 69 | S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, 32mm dia flush pipe of polyethylene of low or high density or PVC, including brackets and connection to pipe, complete all as specified and directed. |
| 70 | S&F in repair vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed. |
| 71 | S&F in repairs CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed. |
| 72 | Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and directed. |
| 73 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 74 | M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed. |
| 75 | M&L for vitrified ceramic tiles 10mm thick, light shade, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 76 | M&L for vitrified ceramic tiles 10mm thick, light shade, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 10mm thick rendering back coat in CM (1:3), complete all as specified and directed. |
| 77 | S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl \\"P\\" or \\"S\\" trap including provision of lime concrete bedding, complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed. |
| 79 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 80 | S & F in repair cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed. |
| 81 | Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 250 & n. exc. 500 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \\"Tank Cleaned on dd/mm/yy\\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 82 | Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 500 & n. exc. 1000 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \\"Tank Cleaned on dd/mm/yy\\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 83 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, including removing of demolished materials upto 100m from site of work and deposited where directed, complete all as specified and directed. |
| 84 | M & L for water proofing treatment in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15mm thick cement plaster in CM (1:4) mixed with water proofing liquid @ 150 ml per bag of cement. (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch, with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an directed. Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Water proofing liquid shall be measured and paid seperately as 'Supply only '. |
| 85 | M&L for PCC (1:5:10) type E-2, (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 86 | M&L for 25mm thick PCC (1:2:4) type B- 0, (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 87 | M & L for 18-20mm thick granite (of any type) tiles machine cut in skirting / dado laid and bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including 10mm thick in CM (1:3) rendering as baking coat to receive tiles on vertical surface and cutting & polishing of tiles including necessary dismantling/demolition of existing flooring of any type, complete all as specified and directed. |
| 88 | Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description disposal unserviceable materials, debris and rubbish to a distance n. exc. 100m, complete all as specified and directed. |
| 89 | M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 90 | M&L for post construction antitermite treatment by injecting chemical of anti termite treatment along with external wall below concrete or machinery apron/floor using chemical emulsion (ATT chemical) @ 2.25 ltr/RM including drilling and plugging holes etc, complete all as specified and directed. |
| 91 | M&L for post construction antitermite treatment of soil under existing floor using chemical emulsion (ATT chemical) @ 1.00 ltr/hole, 300mm dia apart including drilling and plugging 12mm dia holes with CM (1:2) to match with the existing floor, complete all as specified and directed. |
| 92 | M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion (ATT chemical) (in oil or kerosene bases solution) @ 0.50ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 93 | M&L for preparation of old decorated surfaces of walls including cornices etc. by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, complete all as specified and directed. |
| 94 | M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, complete all as specified and directed. |
| 95 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying one coat of oil bound ditemper, complete all as specified and directed. |
| 96 | M&L for complete removal of existing treatmen of old decorated surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots and applying two coats of oil bound ditemper, complete all as specified and directed. |
| 97 | M&L for preparation of old decorated surfaces of wall/chajja including brooming down or steel wire brushing, scraping down smoke shoot etc and applying one coat of cement base paint, complete all as specified and as directed. |
| 98 | M&L for complete removal of existing treatmen of old decorated surfaces of wall/chajja including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coat of cement base paint, complete all as specified and as directed. |
| 99 | M&L for preparation of old painted surfaces of wood or wood based material and applying one coat of synthetic enamel paint (1st grade quality) on surface of any description over 10cm width or girth, complete all as specified and directed. |
| 100 | M&L for complete removal of existing treatment of old painted surfaces of wood or wood based material and applying two coats of synthetic enamel paint on surface of any description over 10cm width or girth, complete all as specified and directed. |
| 101 | M&L for preparation old painted steel or iron surfaces of any description, not otherwise described exc. 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 102 | M&L for complete removal of existing treatment of old painted steel or iron surfaces of any description, not otherwise described exc. 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 103 | M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:3), using water proofing compound as per manufacturer's instructions and finished fair and even, complete all as specified and directed. |
| 104 | M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed. |
| 105 | M&L for complete removal of existing treatment of wall / ceiling etc surfaces and applying two coats of oil bound distemper over and including a coat of 1.0mm to 1.5mm thick wall care putty to obtain smooth & plain surface including making good any undulation on the surfaces, complete all as specified and as directed. |
| 106 | M & L for preparation of old decorated surfaces of wall and applying one coat of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed. |
| 107 | M & L for complete removal of existing treatment of old decorated surfaces of wall and applying two coats of 100% acrylic weather proof exterior emulsion paint of approved colour and shade, complete all as specified and directed. |
| 108 | Removal of vegetation/grass etc including cutting holes into or through brick walls /concrete and removal of small trees/woods etc and making good disturbed surfaces with PCC (1:2:4), type B-0 (using 12.5mm graded crushed stone aggregate) surface area n. exc. 0.50 Sqm, complete all as specified and directed |
| 109 | Cleaning/uprooting of vegetation/small trees, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion, complete all as specified and directed. |
| 110 | M&L repair to broken/damaged RCC chajjas/pillar/lintel or similar surfaces by making good with PCC 1:2:4 type B1 or rendering in CM (1:3), 15mm thick mixed with water proofing compound to top, sides and soffits including necessary form work, reinforecement work, if required, including demolition of broken/loose PCC or taking down old plaster, at any position and upto 10mtr height from ground, complete all as specified and directed. |
| 111 | Note: An amount of Rs.22,590.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender