Tender For Addn/Altn To Cook Houses And Dining Hall Of Airmen Mess And Sncos Mess At Af Stn Samana
Tender Value
44 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Cook Houses And Dining Hall Of Airmen Mess And Sncos Mess At Af Stn Samana
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment on roof including brooming down or steel wire brushing, scraping down smoke soot, mouls, moss and efflorescent salts and treating oil and greasy spots complete all as specified and directed |
| 2 | M&L for PCC in roof pading, coving,filling and mass concrete 1:3:6 type C-1, (using 20mm graded stone aggregate) complete all as specified and directed |
| 3 | M&L for screed/plastering 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note WPC will be measured & paid separately. |
| 4 | Supply only integral water proofing chemical @ 200ml/Bag of cement complete all as specified and directed. Make : Fosroc/ Dr Fixit/ pidilite. |
| 5 | M&L for water proofing treatment to RCC roof slab all as specified below and as directed:-(a) Apply one coat of glass fibre base bitumen felt primer, grade 2 @ 0.25 Kg/Sqm.(b) Laying APP based ploymeric membrane 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150gms/Sqm ) laid on primed roofs & flashing by forced application using Butane torch, and sealing all joints(c) Apply a coat of aluminium paint @ 0.10 ltr/Sqm. |
| 6 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets frame and assesories etc. |
| 7 | S&F 600x600mmx4mm thick false ceiling of Non asbestos fibre cement building boards (E Board) and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The aluminium frame work will be supported on side wall with the use of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, including two coats of synthetic enamel paint over a coat of pink primer complete all as specified directed by the Engineer-in-Charge. |
| 8 | Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 2 Km complete all as spd and directed. |
| 9 | M&L Rendering 10mm thick in CM 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as spd and directed |
| 10 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as spd and directed |
| 11 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spd and directed |
| 12 | M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed |
| 13 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd and directed |
| 14 | M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 15 | M&L for Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 16 | Finishing to kota stone flooring jointed with grey cement slurry mixed with pigment to match the shade of the floor inluding rubbing and polishing complete all as specified and directed. |
| 17 | M&L for Green marble work 18 to 20mm thick (table rubbed and polished) & circular cutting at one end in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match, complete. |
| 18 | M&L 20mm thick granite stone slab of any type (cut, table rubbed and polished)in steps, jambs, pillars, window cills, cooking platforms and like , bedded & jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed |
| 19 | Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed |
| 20 | S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI/CPVC tank fittings for inlet, outlet, etc complete all as specified and directed |
| 21 | Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing to store complete all as spd and directed |
| 22 | S&F 1000 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed |
| 23 | S&F in repair 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms / 40mm - 690 gms) complete all as specified and directed |
| 24 | S&F CPVC ball/gate valves for 32 mm outer dia pipe complete all as specified and directed by Engineer-in-Charge |
| 25 | Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed |
| 26 | S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 27 | Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed |
| 28 | S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 29 | S&F 15mm size angular Stop valves, cast copper alloy, CP,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/cpvc pipe or for unions and fixed complete all as spd and directed |
| 30 | S&F fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/cpvc pipe or for unions and fixed complete all as spd and directed |
| 31 | S&F 15mm dia size Bib taps, CP,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/cpvc pipe or for brass ferrule and fixed complete all as spd and directed |
| 32 | S&F in repair 15 mm bore, swan neck, pillar taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron/cpvc pipes fixed complete all as spd and directed |
| 33 | S&F in repair vitreous china wash basin, white, Table top, size 540 mm x 360 mm x 115mm fixed on and including cast iron cantilever bracket as required,32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge. ( Make Cera - Colmax or equivalent as specified) |
| 34 | S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge |
| 35 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed |
| 36 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge |
| 37 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge |
| 38 | S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern,(ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as spd and directed |
| 39 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as spd and directed |
| 40 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) incl. all accessories / fittings etc complete all as specified and directed by Engineer-in-Charge |
| 41 | S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed. |
| 42 | S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as spd and directed |
| 43 | S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge |
| 44 | S&F in repair chromium plated grating 100mm size with or w/o waste hole complete all as specified and directed |
| 45 | S&F looking mirror of any size, selected quality 4 mm thick mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws,including moulding, complete all as spd and directed |
| 46 | S&F in repairs looking mirror of size 600 x 450 mm, selected quality 5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete all as spd and directed |
| 47 | S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed |
| 48 | S&F in repair Towel Ring of CP fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge |
| 49 | Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia fixed to wall,laid in trenches etc complete all as specified and directed Engineer-in-Charge |
| 50 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 51 | S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge |
| 52 | S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge |
| 53 | M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge |
| 54 | S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed |
| 55 | S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 56 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge |
| 57 | S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge |
| 58 | S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge |
| 59 | S&F for Three compartment high quality stainless steel kitchen sink 1mm thick, kitchen or laboratory, size 2.1x0.7x0.80/0.85m with plugs, bottle trap, washers and wastes etc; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, complete all as spd and directed |
| 60 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any descrition such as Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 61 | M&L Reinforcement cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel /Bands and similar wks including any type of formwork /moulds etccomplete all as specified and directed by Engineer-in-Charge |
| 62 | S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge |
| 63 | S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia or as in stirrups complete all as specified and directed by Engineer-in-Charge |
| 64 | S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge |
| 65 | S& f aluminium powder coating of any color ( thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar work with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge |
| 66 | S&F aluminium door shutters powder coating of any color ( thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge. |
| 67 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ steel screws, in repair all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 68 | M & L Second class hard wood (hollock) plain fillets of Sectional area exc 6 Sq cm but not exceeding 13 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified |
| 69 | S&F Prelaminated medium density fibre board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 70 | S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge |
| 71 | S&F sheet glass 4 mm thick ordinary quality(plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed. |
| 72 | S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed. |
| 73 | S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge |
| 74 | S&F in repairs Door closer hydraulically regulated, designation No. 2, aluminium(die cast) body, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36to 60 kg and fixed complete all as specified & directed. |
| 75 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 76 | S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass lever,in repair fixed to aluminium door complete. |
| 77 | S & F Continuous (piano) hinges, mild steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised |
| 78 | S& F for magnetic catcher of plastic body with striking plate etc and fixed complete |
| 79 | S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed. |
| 80 | Demolition of brick / stone / PCC block masonry / RCC Jalli build/fixed in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed. |
| 81 | M&L for providing precast cement concrete 1:3:6 (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed. |
| 82 | Taking down cement plaster of any thickness in cement or cement lime mortar on brick or stone or concrete walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed |
| 83 | M&L for rendering 15 mm thick on stone masonary or concrete surface of walls in cement mortar 1:6 finished even & fair complete all as specified and directed. |
| 84 | M&L for preparation of newly plastered wall surface and applying 2mm thick wall care putty for making smooth surface and applying two coat of oil bound distemper, complete all as specified. Please Enable Macros to View BoQ information |
| 85 | M&L for preparation of newly plastered wall surface and applying 2mm thick wall care putty for making smooth surface and applying two coat of oil bound distemper, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender