Tender For Repair/Maint And Improvement Of Electric Supply Installation At Saa Under Ge(S) Tezpur
Tender Value
29.92 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
10 days left
EMD
59900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint And Improvement Of Electric Supply Installation At Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) n exc. 1.50 Sqm complete all as specified and as directed. |
| 2 | Taking down Chowkat or Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed. |
| 3 | Taking down Shutters of any description, exc. 1.00 Sqm but not exc 2.00 Sqm Each and keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 4 | Taking down Shutters of any description, not exc 1.00 Sqm Each, and keep in Safe Custody for removing to store, complete all as specified and as directed. |
| 5 | Taking down and Refixing Shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. |
| 6 | Taking down and Refixing Shutters of any description not exc. 1.00 Sqm Each in the Same Opening after easing and adjusting complete all as specified and as directed. |
| 7 | Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as in bed block or hold fast complete all as specified and directed. |
| 8 | S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.complete all as specified and as directed. |
| 9 | S&F Flush Shutters 30 mm thick, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed. |
| 10 | Supply and fix 35mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately). |
| 11 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 12 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 13 | S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.complete all as specified and as directed. |
| 14 | S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.complete all as specified and as directed. |
| 15 | S&F extruded aluminium alloy handel fabricated type, anodised, 150mm long.complete all as specified and as directed. |
| 16 | S&F extruded aluminium alloy handel fabricated type, anodised, 100mm long.complete all as specified and as directed. |
| 17 | S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.complete all as specified and as directed. |
| 18 | S&F in repair Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. complete all as specified and as directed. |
| 19 | S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.complete all as specified and as directed. |
| 20 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.complete all as specified and as directed. |
| 21 | S&F (in repair) MS helical door spring 150 mm size incl roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed. |
| 22 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.00mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 23 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 24 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed. |
| 25 | S&F 4 mm thick frosted/ pin headed glass in ventilator shutters complete all as specified and directed by Engr-in-Charge |
| 26 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 27 | Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work complete all as specified and as directed. |
| 28 | M&L 2nd class HW in scantling fixed clean swan in framed work complete all as specified and as directed. |
| 29 | Dismanting timber scantling under 40 Sqcm in secion In fillests, rails , posts, refters and purlins etc in any position in framed work or unframed work complete all as specified and as directed. |
| 30 | M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil. complete all as specified and as directed. |
| 31 | Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed |
| 32 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 33 | S&F false ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling.complete all as specified and as directed. |
| 34 | Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.complete completeall as specified and as directed. |
| 35 | S&F 0.5mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws complete all as specified and as directed. |
| 36 | All as per item No.35 above but plain sheet for ridge ,gutter etc fixed with self tapping screws complete all as specified and directed, |
| 37 | S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked book bolts. Complete all as specefied and directed. |
| 38 | Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and directed |
| 39 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 40 | Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed. |
| 42 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and as directe |
| 43 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. complete all as specified and as directed. |
| 44 | M&L for Chequered cement concrete tiles of size 300 x 300 x20 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 45 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 100 mm sand cushion over rammed earth complete all as specified and as directed. |
| 46 | Surface excvation n.exe 30 CM deep and avg 15 CM deep and getting out in soft/loose soil.complete all as specified and as directed.complete all as specified and as directed. |
| 47 | Hardcore of guage n exe. 63 mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface (broken stone or bloulders).complete all as specified and as directed. |
| 48 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 49 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and as directed. |
| 50 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' complete all as specifed and as directed. |
| 51 | M&L for 100 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in as in sub base,sub floors , floors & paving etc. complete all as specifed and as directed. |
| 52 | M&L 40 mm thick,Cement concrete, type B-1, (1:2:4), 20 mm graded aggregate as in floor making finished even and smooth using extra cement.complete all as specified and as directed. |
| 53 | M&L for PCC 1:2:4 (using 12.5mm graded aggr) in roof Kerbs,rounded or chamfered or haunching in chajjas to prevent water seepage into brick walls,including necessory formwork and scafolding upto a height of 8mtr including demolition of existing PCC complete all as specified and directed. |
| 54 | M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed. |
| 55 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 56 | Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed. |
| 57 | M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 58 | M&L TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 59 | Use & Waste of Formwork to sides and soffits of floor or roof beam , beam haunching, girders ,lintels shevles inclusidng support and hangs complete all as specified and as directed. |
| 60 | Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge. |
| 61 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 62 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 63 | Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc.complete all as specified and as directed. |
| 64 | M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately) |
| 65 | M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 66 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed. |
| 67 | Supply only water proofing compound. Conforming to IS -2645. complete all as specified and as directed. |
| 68 | M&L preparation of newely plaster surfaces and appplying two coats of weather coat(Apex) over one primer coats of damp shealth over one coat of putty to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed. |
| 69 | M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall complete all as specefied and directed. |
| 70 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed. |
| 71 | Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 72 | Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 73 | S&F Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding including Taking out/ down unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 74 | Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement complete all as specified and as directed. |
| 75 | S&F Tubular Towel rail chromium plated 600mm long 20mm dia D type with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 76 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed. |
| 77 | S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 78 | Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed. |
| 79 | S&F in repairs stop cock cast copper alloy, fany type ,chromium plated, screwed down, high pressure, with crutch of butterfly handle screwed both ends to iron pipe of size 15mm, complete all as specified and directed. |
| 80 | S&F in repairs angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed. |
| 81 | Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 82 | Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm complete all as specified and directed. |
| 83 | Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed. |
| 84 | Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. |
| 85 | Supply and fix,as in repair, CP 40mm dia waste coupling with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed. |
| 86 | Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for complete all as specified and directed. |
| 87 | S&F in repairs grating 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and directed. |
| 88 | Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore complete all as specified and direcetd. |
| 89 | Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 90 | Supply and fix as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 91 | Supply and fix, as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 92 | Supply and fix, as in repair, steel handles for steel window for left and right side shutter complete all as specified and directed |
| 93 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 94 | All as per item No 93 here in before but 20 mm bore.complete all as specified and as directed. |
| 95 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed, |
| 96 | All as per item No 95 here in before but 20 mm bore.complete all as specified and as directed. |
| 97 | Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed |
| 98 | M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed |
| 99 | M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed |
| 100 | M&L Applying one coat of Oil bound distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed |
| 101 | M&L Applying two coat of Oil bound distemper with a coat of primer to old wall surfaces of walls and cornices complete all as specified and directed |
| 102 | M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over two primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks complete all as specified and directed. |
| 103 | M&L for 1 mm thick wall care putty including even and smooth surface after complete removal of existing treatment complete all as specified and directed by Engr-in charge . |
| 104 | Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 105 | M&L prepration of new steel surface and applying two coats of synthetic enamel paint over one coats of red oxide preparation of new surfaces over 10 cm width on ginth. complete all as specified and as directed. |
| 106 | M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specefied and directed. |
| 107 | M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint complete all as specefied and directed. |
| 108 | S&F Framed work such as in gate, rollers, cleats, base plates , plain or chequered and rail etc, with and similar work conforming to Fe 290. Gde -E-165 for framed and hung as gates including hold fast pintle hinges stops hand made sliding bolts and ornamental and intricate design, etc .complete all as specified and as directed. |
| 109 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 110 | Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls complete all as specified and directed. |
| 111 | S&F in repairs PVC (SWR) 110mm dia bends any radius complete all as specified and directed. |
| 112 | S&F in repairs PVC (SWR) branch 110mm bore pieces, single ( single Y ) equal or unequal complete all as specified and directed. |
| 113 | S&F in repairs PVC (SWR) junction110mm bore single ( single t) equal or unequal complete all as specified and directed. |
| 114 | Supply and fix, PVC cowls 110 mm bore complete all as specified and directed. |
| 115 | Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls complete all as specified and directed. |
| 116 | S&F in repairs PVC (SWR) 75 mm dia bends any radius complete all as specified and directed. |
| 117 | S&F in repairs PVC (SWR) branch75 mm bore pieces, single ( single Y ) equal or unequal complete all as specified and directed. |
| 118 | S&F in repairs PVC (SWR) junction75 mm bore single ( single t) equal or unequal complete all as specified and directed. |
| 119 | Supply and fix, PVC cowls 75 mm bore complete all as specified and directed. |
| 120 | S&F Stack clamps including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore complete all as specified and directed. |
| 121 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil.complete all as specified and as directed. |
| 122 | M&L Providing, cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in roof kerbs ,coping or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 123 | Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 124 | Returning filling in , including spreading,levelling,watering & well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 125 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 126 | M&L Cement concrete 1:4:8 (Type D2) in foundations, filling and mass concrete complete all as specified and as directed. |
| 127 | M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 128 | M&L Reinforced Cement Concrete Type B1 (1:2:4) (20mm graded crushed stone aggregate) as in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 129 | M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and as directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 130 | M&L Reinforced Cement Concrete Type B1 (1:2:4) (20mm graded crushed stone aggregate) in Columns, Pillars, Piers, Posts and Struts, etc. complete all as specified and as directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 131 | M&L Reinforced cement concrete Nominal Mix type B1 1:2:4 (20 mm graded aggregate) as in chajjas etc complete all as specified and as directed. |
| 132 | Use & waste form work for flat fair finished surfaces of concrete foundation, footings, bases of columns and plinth beam and similar work for rough finished flat surfaces of concrete. |
| 133 | Use & waste form work to sides of pillars,posts, struts, piers, columns and stanchions of square, rectangular on polygonal shape for rough finished surfaces of concrete.complete all as specified and as directed. |
| 134 | Formwork to chullah hoods, chajjas,troughs and similar items including edges of rough finished flat surfaces of concrete.complete all as specified and as directed. |
| 135 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as in rough finished surfaces of concrete all as specified and directed.complete all as specified and as directed. |
| 136 | M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed.NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items. |
| 137 | M & L PCC 1:3:6 type C2 100mm thick (using 40mm graded aggregate) as in sub base finished the concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 138 | M&L for 40mm PCC 1:2:4 (Type B0) Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 139 | S&F factory made solid PVC Moulded Door Shutter, With 20mm multi chamber hollow PVC profile (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page no. 161 of SSR Part -II complete all as specified and directed. |
| 140 | M&L Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and as directed. |
| 141 | M&L PCC 1:2:4 type B-1, (using 20mm graded aggregate) 75mm as in plinth protection and finished even complete all as specified and as directed. |
| 142 | M&L Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry over 10mm backing coat in CM 1:4 and pointed in white or colour cement to match complete all as specified and directed. |
| 143 | Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair complete all as specified. |
| 144 | Material and labour for applying three coats of white wash on walls including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 145 | M&L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; dia of pipe 150mm in PCC 1:3:6 type C2 complete all as specified and as directed. |
| 146 | M&L laying salt glazed stoneware drain pipe conforming to IS 651-1972 grade ‘A’ in trenches and jointed in cement mortar (1:1) for 150 mm internal diameter of pipes complete all as specified and shown on drawings. |
| 147 | M&L Cutting into existing manholes for connecting new drains, making good to 150mm pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.complete all as specified and as directed. |
| 148 | S&F PVC valveless syphonic action pipe flushing cistern low level, 10Lt capcity, white with 600mm long PVC Connection of PTMT nuts at both ends, inlet ball valve, float, flush pipe and handle including brackets.complete all as specified and as directed. |
| 149 | Supply and fix15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 150 | S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of GI brackets, brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 151 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm bore steel tube.complete all as specified and as directed. |
| 152 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender