Tender For Renovation Of Different M.I. Schemes Under 49-Chaw-Manu (St) Constituency Within The Jurisdiction Of Wr Sub-Division Manu During The Year 2026-27/S.H:- Annual Repairing Of Pump Motor, Suction Delivery, Electrical Equipments Etc.
Tender Value
6.79 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
12 days left
EMD
13583
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Different M.I. Schemes Under 49-Chaw-Manu (St) Constituency Within The Jurisdiction Of Wr Sub-Division Manu During The Year 2026-27/S.H:- Annual Repairing Of Pump Motor, Suction Delivery, Electrical Equipments Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Dismental of horizontal pump and motor of 20/25 HP from the base and carrying the pump set to the nearest workshop for repairing the body thread of stag nut and carrying the same to the scheme andfitting fixing the pump set as before as per direction of the Engineer-in-charge. |
| 2 | Dismentaling of G.I pipe including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm ɸ |
| 3 | Dismentaling of G.I bend including necessary earth cutting etc. & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge.125/150 mm ɸ |
| 4 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer-in-charge |
| 5 | 125 mm dia |
| 6 | 150 mm dia |
| 7 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in- Charge. |
| 8 | 125 mm dia nominal bore(medium) |
| 9 | 150 mm dia nominal bore(medium) |
| 10 | Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per chapter 20 of CPWD specification and direction of the Engineer- in - charge,A. External work,i. 40 mm dia. nominal bore- For Priming line |
| 11 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 12 | Providing and fixing 40 mm dia following fittings as per direction of the Engineer in Charge. |
| 13 | a) Full way valve (Brass make) |
| 14 | b) Union joint (GI) |
| 15 | c) Elbow (GI) |
| 16 | d) Tee (GI) |
| 17 | Providing & fitting fixing C.I. foot valve spare parts of 125/150 mm dia at site of work of approved quality. |
| 18 | a) C.I foot valve weight |
| 19 | b) C.I. foot valve ring |
| 20 | c) C.I. foot valve net |
| 21 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality. 150 mm dia |
| 22 | Labour charge for lifting of hose pipe from river bad by dismantling of G.I. suction line and refitting the same after cleaning the pipe with necessary filling etc. complete as per direction of the Engineer in charge. |
| 23 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. |
| 24 | 150 mm dia |
| 25 | 125mm dia |
| 26 | Providing & fitting fixing of MS flange (8 mm wall thickness) by welding with G.I. / MS pipe and placing in position as per specification and the direction of the Engineer-in-charge. |
| 27 | 150 mm dia |
| 28 | 125mm dia |
| 29 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. 150 mm dia |
| 30 | Providing and fixing MS bolts including nuts and washers complete as per standard design:- Above 300mm length.- |
| 31 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. 150 mm dia |
| 32 | Providing & fitting fixing C.I tail piece of approved quality at site of work., 150 mm dia |
| 33 | Providing & fitting fixing MS Foot Valve as per relevant IS specification and direction of the Engineer-in-charge.150 mm dia |
| 34 | Labour charge for checking the panal board and making safe including dismantling and refitting fixing of wire and electrical equipments and reconstruction etc complete as per direction of the engineer in charge. |
| 35 | Supplying & fitting fixing manually operated oil immerged starter of approved quality. 30 Hp Osco/BCH Make |
| 36 | Providing & fixing 200 Amps busber of size 600x450x100 mm with 4 nos copper strip of size 450x40x4 mm of approved quality. |
| 37 | Repairing of Osco starter including supplying & fixing of necessary spare parts as per direction of Engg-in-charge. |
| 38 | Stand finger |
| 39 | Gola finger |
| 40 | CT Coil |
| 41 | Magnet Coil |
| 42 | Circuit board for Osco starter of Backelite make |
| 43 | Repairing charge of busber including changing of copper strip with neccesary screws,nuts, washer including proper reconnection and wiring etc. complete as per direction of the engineer in charge. |
| 44 | Labour charge for dismentling of 200-A main switch and refitting fixing the same after repairing i.e. Chanding of H.R.C fuse, cutout, connecting rod, backlite plate, finger, insulated iron, handle i.e as require and making good as per direction of the Engineer-in-charge. |
| 45 | Repairing of 63 amps sub-main switch providing all kit kat and kit kat base and repair where necessary in/c fitting fixing and testing complete. |
| 46 | Dismentaling of pump for overhauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs.in two spell complete as per direction of the Engineer-in-charge. For LI |
| 47 | Providing & fitting fixing Pump Shaft of approved quality |
| 48 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump |
| 49 | Providing & fitting fixing coupling/ impeller Key of approved quality.Stainless Steel |
| 50 | Providing & fitting fixing Casing ring of approved quality 150 mm dia 10 mm thick |
| 51 | Providing & fitting fixing C.I. gland of approved quality For LI |
| 52 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. |
| 53 | 6305 Ball bearing (TATA /SKF) |
| 54 | 6306 Ball bearing (TATA /SKF) |
| 55 | 6307 Ball bearing (TATA /SKF) |
| 56 | 6308 Ball bearing (TATA /SKF) |
| 57 | 6309 Ball bearing (TATA /SKF) |
| 58 | 6310 Ball bearing (TATA /SKF) |
| 59 | Reparing of 125 mm dia sluice valve by dismentling in/c changing of sluice valve spindle, key, gasket, nuts and bolts etc. and refitting fixing the same after making good in the exisitng delivery line as per direction of the Engineer in charge. |
| 60 | Labour charge for dismentling of 125 mm dia non-return valve and refitting fixing the same after proper washing and ressemling the C.I seperator plate etc as per direction of the engineer in charge. |
| 61 | Repairing of pump shaft by welding, polishing etc complete as per direction of the Engg-in-Charge. |
| 62 | Labour charge for dismantling, turning making alignment of pump motor shaft for suitable fitting coupling,bearing,sleeve bush etc as per direction of the Engg-in-Charge. |
| 63 | Repairing of impeller by welding, polishing etc complete as per direction of the Engg-in-Charge. |
| 64 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. 150 mm dia |
| 65 | Providing & fitting fixing coupling nuts & bolts (all Size) of approved quality. For LI |
| 66 | Providing & fitting fixing coupling rubber bush (All Size) of approved quality. For LI |
| 67 | Providing & fitting fixing coupling star bush (All Size) of approved quality. 150 mm dia |
| 68 | Providing and fitting fixing shaft sleave bush of approved quality For LI Cast Iron (CI) |
| 69 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge |
| 70 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. |
| 71 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. |
| 72 | 6 to 8 mm thick |
| 73 | 10 to 12 mm thick |
| 74 | Supplying & filling of Transformer oil in the tank of manually operated oil immerged starter of approved quality. |
| 75 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. |
| 76 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuses) triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havels / BCH make etc. complete as per specification and direction of the Engineer-in-Charge. |
| 77 | ii) 63 amps. |
| 78 | iv) 200 amps |
| 79 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter (L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 80 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type (L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
| 81 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc.complete (ISI Marked) on the pannel board of approved quality. 7/16 Copper Wire Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender