Tender For Minor Maintenance Of Different Mi Schemes Under 49-Chaw-Manu (St) Constituency Within The Jurisdiction Of Wr Sub-Division Manu During The Year 2026-27/Sh:- Annual Repairing Of Pvc Distribution System, Hydrant Points, Sluice Valve Chamber,
Tender Value
6.78 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
13562
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Minor Maintenance Of Different Mi Schemes Under 49-Chaw-Manu (St) Constituency Within The Jurisdiction Of Wr Sub-Division Manu During The Year 2026-27/Sh:- Annual Repairing Of Pvc Distribution System, Hydrant Points, Sluice Valve Chamber, Priming Tank Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth upto 1500 mm (slope-1 in 200)including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per Chapter - 2 of CPWD specification and direction of the Engineer - in - charge. |
| 2 | i) For pipes not exceeding 90 mm OD |
| 3 | ii) For pipes exceeding 90 mm OD but not exceeding 300 mm OD. |
| 4 | ii) For pipes exceeding 300 mm OD but not exceeding 600 mm OD. |
| 5 | Labour charge for repairing of leakage in existing UPVC distribution system including required earth cutting and fitting fixing of necessary coupler etc. complete and refilling the trench with available excavated earth as per direction of the Engineer-in-charge. (Payment of couplers, tees, reducers etc will be made separately). |
| 6 | 315 mm dia |
| 7 | 250 mm dia to 110 mm dia. |
| 8 | 90 mm dia. |
| 9 | Providing and laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineer-in-charge. |
| 10 | 90 mm dia |
| 11 | 110 mm dia |
| 12 | 140 mm dia |
| 13 | 160 mm dia |
| 14 | 200 mm dia |
| 15 | 250 mm dia |
| 16 | 315 mm dia |
| 17 | Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted) suitable for pipes of Working pressure 4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge. |
| 18 | 160x140 mm dia |
| 19 | 140x110 mm dia |
| 20 | 110x90 mm dia |
| 21 | Providing and fitting fixing of different dia rigid UPVC unequal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of working pressure 4.0 kg/sq.cm confirming to IS: 10124 (part-V) as per CPWD Specification & direction of Engineerin-charge.Unequal Tee |
| 22 | 160x160x140 mm dia |
| 23 | 140x140x110 mm dia |
| 24 | 110x110x90 mm dia |
| 25 | Providing and fitting fixing of different dia rigid UPVC equal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 4.0 kg/sq.cm confirming to IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge.Equal Tee |
| 26 | 140x140x140 mm dia |
| 27 | 110x110x110 mm dia |
| 28 | 90x90x90 mm dia |
| 29 | Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engineer-incharge (Rate excluding the cost of NTP control valve).80x50 mm dia |
| 30 | Providing & fitting fixing rigid UPVC bend(30 degree,45 degree,60 degree, 90 degree) for UPVC pipes as per IS specification of Working pressure 4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-charge. |
| 31 | 140 mm dia |
| 32 | 110 mm dia |
| 33 | 90 mm dia |
| 34 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per of CPWD specification and direction of the Engineer - in - charge. |
| 35 | 150 mm dia (PN-1.0) |
| 36 | 125 mm dia (PN-1.0) |
| 37 | 100 mm dia (PN-1.6) |
| 38 | Supplying & fitting fixing of sluice valve spindle with nuts suitable for different dia existing sluice valve as per direction of the Engineer-in-charge. |
| 39 | 150 mm dia |
| 40 | 125 mm dia |
| 41 | 100 mm dia |
| 42 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge. |
| 43 | Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with steel primer(tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting, backfilling complete as perdirection of Engineer-in-charge. |
| 44 | Dismentalling of existing PVC pipe from underground including necessary earth cutting etc.and dismentalled pipes,couplers,tees,etc properly stacking in safe site as per CPWD Specification & direction of Engineer-in-charge.a) Pipes,cables etc. exceeding 75 mm dia but not exceeding 315 mm dia. |
| 45 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. |
| 46 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 47 | Earthwork in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: |
| 49 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 50 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 51 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 52 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 53 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 54 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 55 | Neat cement punning Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender