Tender For General-Lift Installation - Commercial Complex, Kattappana-Lift Installation - Commercial Complex, Kattappana-General Electrical Work
Tender Value
16.05 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
2 days left
EMD
40125
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Idukki → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Lift Installation - Commercial Complex, Kattappana-Lift Installation - Commercial Complex, Kattappana-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | VERTICAL TRANSPORTATION SYSTEM |
| 2 | OD24281/2026-2027:Supplying, installation, testing and commissioning of MR lift 8 passenger (480 kg) lift having contract speed of 1 MPS,serving different floors in the existing lift shaft as per detailed specifications enclosed and as under: (i) Speed : 1 MPS (ii) Floors : G,1,2,3,4,5,6 (iii) Travel : 21 meters (approx.) (iv) Stops & Opening : 7 (v) Controller : A.C. variable voltage & variable frequency (vi) Automatic rescue device complete with dry maintenance-free batteries as required. (vii) Operation: Microprocessor/micro controller -based single automatic push button / simplex selective collective / duplex collective selective with or without attendant. (viii) Power: 415 V, 3 phase, 50 Hz, 4-wire system (ix) Type of Doors: (a) Car: Automatic power operated, telescopic horizontal sliding stainless steel scratch-proof surface (moon rock finish) (b) Landing Doors: SS doors finished of approved shade(Preferably brush finish). (C) floor selection switches shall be braille lift compliance , grab rail and all other facilities for differently disabled people shall be included,(d)Flooring should be granite. Including all liaison work related to electrical inspectorate and KSEBL,all statutory fees will be reinbursed after submitting original receipt ,on the buy back agreement making good the damage all works should be carried out as per the Direction from the engineer in charge . Lift Pit size 1.87*1.75 meter. |
| 3 | OD24285/2026-2027:Dismantling the existing damage lift including motor,rope,rail,counterweight,dead weight ,spring,panels,I/O units ,electrical components and all scraps etc valuating and take it back including all transportation and dismantling charge. |
| 4 | OD100419/2026-2027:Supply, Installation, Testing and Commissioning LIFT PANEL 1 Fabrication, supply, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV Main panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Incomer - 63A, FP MCB Isolator - 1No. 63A, 415V, 25 kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set Class B+C / Class 1 + 2 Surge arrestor device with necessary rating MCB for back-up protection - 1 No. RYB phase indicating LED lamps with control fuses and switches - 1 set. Outgoing 40A, 100mA, FP RCBO - 1 No. 16A, 30mA, DP RCBO - 1 No. 16A, 415V, 16 kA best conductivity Al DP bus bar with SMC supports, heat shrinkable sleeves etc complete as required - 1 Set 10A, 10kA, SP MCB - 1 No.6A, 10kA, SP MCB - 3 Nos. |
| 5 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 6 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 7 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 8 | OD100575/2026-2027:Supply installation,testing and Commissioing of bulk head fittings with 10watt LED bulb in lift well case using necessary accessories and givingconnection etc. as required. |
| 9 | 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 10 | 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender