Tender For Retrofitting Of Pump House And Ancillary Works Including Shifting Of Existing Ci/Di/Upvc/Ac Pipelines At Head Works And 2Nd Tw Site Of Bhagabanpur Pwss Of Shy Ur-I Block Under Uluberia Sub-Division Of Howrah Division P.H.E Dte.
Tender Value
2.40 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
7 days left
EMD
4810
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Retrofitting Of Pump House And Ancillary Works Including Shifting Of Existing Ci/Di/Upvc/Ac Pipelines At Head Works And 2Nd Tw Site Of Bhagabanpur Pwss Of Shy Ur-I Block Under Uluberia Sub-Division Of Howrah Division P.H.E Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m In ground floor including roof.(a) upto 150 mm. thick |
| 2 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (Avg.distance 55 km.)a) Pakur Variety. |
| 3 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin- Charge prior to execution will be necessary). (Payment to be made on area cleared) |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolidating the same by through saturation with water ramming complete including the cost of supply of sand .(payment to be made on measurement of finished quality. |
| 5 | Single brick flat soling of picked jhama brick including ramming& dressing bed to proper level& filling joints with powder earth or local sand including cost of sand or earth including plinth protection. |
| 6 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 7 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof. |
| 8 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.a) in ground floor including roof |
| 9 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) in ground floor including roof |
| 10 | Dismantling all types of plain cement concrete works, stacking seviceable materials at site and removing rubbish as directed within a lead of 75m.. In ground floor including roof.a) upto 150 mm, thick |
| 11 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 12 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)(iii) 35mm thick shutters with 19mm thick panel of size 30to 45 Cm.. A) Gamari |
| 13 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local. |
| 14 | Brick work with 1st class bricks in cement mortar (1:4)(b) In superstructure, ground floor |
| 15 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, caffolding/ staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](a) 20 mm thick plaster |
| 17 | (b) 15 mm thick plaster |
| 18 | (c) 10 mm thick plaster |
| 19 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 20 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.(In Ground Floor) (a) One Coati) Water based interior grade Acrylic Primer |
| 21 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground floor:(iii) Two coats. |
| 22 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
| 23 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including Smoothening surfaces by sand papering etc. |
| 24 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including moothening surfaces by sand papering etc. |
| 25 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :a)On timber or plaster surface, With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :a)On timber or plaster surface, With super gloss (hi-gloss) - |
| 26 | b)On steel or other metal surface, With super gloss (hi-gloss) (iv) Two coats (with any shade except white)- |
| 27 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length |
| 28 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (Add Extra 30% for Oxidised Fittings)a) 75 mm x 40 mm x 1.12 mm |
| 29 | b) 100 mm x 50 mm x 1.25 mm |
| 30 | Iron hasp bolt (oxidised) of approved quality fitted and fixed complete with 16mm dia rod with center bottom round fitting.a) 200 mm long |
| 31 | b) 300 mm long |
| 32 | Iron socket bolt of approved quality fitted and fixed completea) 150mm long x10mm dia bolt. |
| 33 | b) 300 mm dia long x 100 mm dia |
| 34 | (A) Iron door ring of approved quality fitted and fixed with nut and washeriii) 75 mm dia |
| 35 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(vii) 25 mm dia |
| 36 | (ix) 15 mm dia |
| 37 | Supplying, fitting & fixing UPVC pipes AType and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(i) 110 mm. Dia. |
| 38 | B) UPVC Fittings: a) Plain Tee(i) 110 mm. Dia. |
| 39 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work PVC Pipesa) 15 mm |
| 40 | b) 25 mm |
| 41 | Supplying, fitting and fixing bib cock or stop cock.e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 42 | Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed a) Upto 20 users: i) Within a lead of 150 metre |
| 43 | ADD GST @ 18% |
| 44 | ADD CESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender