Tender For Ugradation, Facelifting Of Miya Shah Sahib Shrine With Allied Works At Karapora Rainwari Srinagar.(Adv. Cost Rs. 138.86 Lacs) (Incl Cost Of Material+Gst)
Tender Value
1.38 Crore
Estimated cost
Bid Submission
17 Aug 2026
10 days left
EMD
2.77 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Ugradation, Facelifting Of Miya Shah Sahib Shrine With Allied Works At Karapora Rainwari Srinagar.(Adv. Cost Rs. 138.86 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Restoration |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.2 For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 15.2.2 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : 15.39.3 Thickness above 25 mm upto 40 mm. |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : 15.12.2 Of area beyond 3 sqm. |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm |
| 7 | Supplying and laying Dry stone Soling dully hand packed tightly , watering and with all carriages up to the site of work |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thk |
| 9 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed 7.44.2 Rough chisel dressed |
| 10 | 6 Pointing in stone work with cement motor 1:3 mix |
| 11 | Providing &Laying of 40 mm thick Diver stone tile laid on 20 mm thick cement mortor 1:4 mix including carriage complete job |
| 12 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 13.2.1 1 : 4 ( 1 cement : 4 fine sand) |
| 13 | Wall lining butch work upto 10 m height with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips of minimum length 300mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75 x 75mm and by providing layer of 75 thick strips including 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including ruled pointing in cement mortar 1: 2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of the stone and curing complete as per the directions of engineer-in-charge. |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 9.1.3 First class deodar wood |
| 15 | Providing and fixing new 1st class well seasoned and chemically treated deodar wood (of approved quality) work in Shutters of windows, clerestory windows,ventilators , other frames and wrought frame of approved size , as per traiditional wooden joinery of members, and fixed in position in traditional detail/manner with the help of holdfasts / traditional holdfast / handmade nails etc . Item is inclusive of carving /engraving of patterns on fames as per existing patterns on original frames / detail drawing and finish with primer and Redoxide as approved by the Engineer In-charge/ Consultants . Item also include all leads, lifts and carriage upto all heights including necessary framework/scafolding etc required to complete the task |
| 16 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : First class deodar wood. |
| 17 | Renewing glass panes, with wooden fillets wherever necessary : 14.7.2 Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 18 | 9999.1227644 PROVIDING HIGH QUALITY MELAMINE POLISH IN TWO OR MORE COATS TO OBTAIN HIGH QUALITY GLOSS AND FINISH I/C PROVIDING TWO OR MORE COATS OF FRENCH SPIRIT POLISH, WAX POLISHING, WOOD FILLER, SEALER, LACQUER AND FINISHING COAT OF MELAMINE POLISH AT ALL HEIGHTS |
| 19 | 9999.1194561 P/F of ornamental eaves boarding (300x32mm) of 2nd class deodar wood as per the approved pattern and design including cost of nails / screws and scaffolding charges / PU polish over prepared base / finishing to be approved by Engineer in charge complete in all respects |
| 20 | 9999.3668149 Providing and Fixing of Readymade wooden panelling t&g imported inclusive of polish, framework with 12mm ply incl. cornice 3\\" complete job |
| 21 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Gul |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 24 | Supply installation testing and commissioning of Heritage architectural ornamental decorative cast iron pole as per specification/ drawing (enclosed) Dwarka make /Karara Mujasame or of Equivalent standard Make. having the following specifications:-The pole with brackets shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The pole height should be 3400mm. The decorative pole has ornamental base (Approx. overall dimension-height 655mm, bottom dia 360mm) shall have a provision of inbuilt junction box for fixing MCB’s or cutouts with detachable window cover. The main cylindrical shape part of this pole is starts heavy duty mild steel hollow round pipe of 114mm dia with decorative top nut for better look of cast iron .The pole shall be similar to the once shown in the drawing. |
| 25 | Devri Gate |
| 26 | Earth work in excavation by manualmeans in trenches for foundations,drains, pipes, cables etc.(not exceeding 1.5 m in width) and for shafts, wells,cesspits and the like not exceeding10 sqm on plan, includingdressing of sides and rammin of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directeed.All kinds of soil. |
| 27 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 28 | P/L stone soling incld. hand packing all carriages complete job. |
| 29 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:(1:4:8 using 40mm aggregate.) |
| 30 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4.4.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form for.Arches, domes, vaults upto 6 m span |
| 33 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 34 | R/F for RCC work incld. cutting,bending,straigthening,cutting, carriage and placing in position T.M.T bars |
| 35 | Providing and Erecting double bamboo scaffolding (cup lock type) for repair work upto 40ft. height above ground level using 150 to 200 mm dia bamboo posts including for horizontal bracing binding with coir/jute ropes or nails and necessary support ,the scaffolding shall be properly aligned and firmly fixed in position to ensure safety during Construction, dismantling of scaffolding after completion of work is also included. |
| 36 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with M20 Grade (1:1.5:3 using 20mm aggregate.) |
| 37 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed7.44.1 Fine chisel dressed |
| 38 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 39 | Extra for arch masonry with devri stone curved on plan for a mean radius not exceeding 6 m. |
| 40 | Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:5.5.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 41 | R/F for RCC work incld. cutting,bending,straigthening,cutting and placing in position T.M.T bars |
| 42 | Stone work in plain ashler in cornices 100mm.in cement mortar 1:6(1 cement :6 coarse sand) including pointing with cemen mortar 1 :2 (1white Cement :2 stone dust)with an add mixture of pigment matching the stone shade (Devri stones fine chisled and including extra labour for rectangular pillars and arch portion and incld. all carriages upto site of work complete. |
| 43 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 44 | Providing 65x6 mm angle iron hold fast cm long including fixing to frame with bolts, nuts and plugs and embeddings in cement concrete block 30x10x15 cm 1:1:5:3 mix ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 45 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 46 | Demolition and Disposal of existing Gate |
| 47 | CARRIAGE Sand Avg 15 Km by MT |
| 48 | Stone aggregate for avg lead of 15km |
| 49 | Wazu Khana |
| 50 | Engagement of manual labour for clearence of site including disposal of same, complete |
| 51 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 1 M from edge of cutting. |
| 52 | Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete |
| 53 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:4:8 (1Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal Size) |
| 54 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:3:6 (1Cement: 3 fine sand: 6 graded stone aggregate 20mm nominal Size) |
| 55 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 56 | Suspended floors, roofs, landings, balconies and access platforms. |
| 57 | Edges of slabs and breaks in floors and walls |
| 58 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 cement : 6 Coarse sand) including carriages upto 50 km |
| 59 | Half Brick Wall |
| 60 | Providing and fixing of aluminium Doors, windows, with prelaminated boards and glass shutters Complete job |
| 61 | Providing and fixing of Aluminium fittings.100m Tower Bolt |
| 62 | 200 Al drop |
| 63 | 100mm Handle |
| 64 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 65 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
| 66 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 67 | Supplying and filling in plinth with fine sand / Nallah Muck under floors including watering ramming, consolidating and dressing complete. |
| 68 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 69 | 12 mm Thick plaster in Cement Mortar 1:4 MIX |
| 70 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 71 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 72 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 73 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including ridges, hips or valleys |
| 74 | Providing and fixing of Eaves Boarding of size 250x32mm thick 2nd class kail wood |
| 75 | Providing and fixing of 20 mm thick butt jointed Wooden planks for soffits incl cost of nails, screws etc including painting with synthetic enamil paint all complete.; Budloo wood |
| 76 | Providing wood work in frames of false ceiling / ceiling joists partitions etc ( Ist class Budloo wood) including fixing by nails, screws etc all complete |
| 77 | Provifing and fixing 50x50 mm wooden shutters with vertical channels 20x10x2mm and braced with flat iron diagonal 20x5 mm size, with top and bottom all of T-iron 40x40x6 mm, including applying a priming coat of approved steel primer. |
| 78 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 79 | Providing and fixing of G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etx internal work.15 mm dia Nominal Bore |
| 80 | 20 mm dia Nominal Bore |
| 81 | Providing and fixing of G.I. Unions complete with including cutting making good the wall etc. 15mm dia Nominal Bore |
| 82 | 20 mm dia Nominal Bore |
| 83 | Providing and fixing of G.I. cross over |
| 84 | Providing and fixing of G.I tanki nipples20 mm Dia Nominal Bore |
| 85 | Providing and fixing of C.P ball valve of 15 mm Dia Nominal Bore |
| 86 | 20 mm dia Nominal Bore |
| 87 | Providing and fixing of PVC Prince pipe (Type B) in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation100 mm Dia Pipe |
| 88 | 75 mm Dia pipe |
| 89 | Providing and fixing of floor trap 100m dia |
| 90 | Providing and fixing of PVC flexible |
| 91 | Providing and fixing following PVC (100 mm Size)door junction |
| 92 | plain bend |
| 93 | collars |
| 94 | Reducers 100mm to 75 mm |
| 95 | Cowel |
| 96 | plain bend 75 mm size |
| 97 | Collars 75mm size |
| 98 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 99 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make (NITCO, ORIENT, SOMANY, KAJARIA, or equivalent), laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 100 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Indian Type |
| 101 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 102 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 103 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 104 | Providing and fixing white vitreous china flat back lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively |
| 105 | providing and Fixing urinal partion |
| 106 | Providing and fixing CP brass bib cock of approved quality Parko / Marc15 mm nominal bore |
| 107 | Providing and fixing C.P long bend of approved quality 40 mm |
| 108 | Providing and fixing C.P. brass angle valve of approved quality Parko / Marc 15 mm nominal bore |
| 109 | Providing and fixing C.P. Nipples of approved quality 25 mm to 50mm long |
| 110 | Providing and fixing C.P. Cups of approved quality |
| 111 | Providing and fixing C.p Gratings of approved quality |
| 112 | Providing and fixing Jabalpor Master trap of approved quality |
| 113 | Providing and fixing soap dishes of approved quality |
| 114 | Providing and fixing C.P towel rod 600mm long of approved quality |
| 115 | Construct brick masonry man hoel in cement mortar 1:4 ( 1 cement : 4 coarse sand) RCC top slab with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 ( 1 cement: 3 Coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 ( 1 cement: 2 Coarse sand : 4 graded stone agregate 20mm nominal size finished with floating coat of neat cement complete.a) size 300x300x300mm |
| 116 | b) Size 450x450x450mm |
| 117 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 118 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 119 | Providing and fixing of lighting points in 1.5 mm square CU wire with FR insulation duely ressissed in walls ceiling / passing through conduits cost of 5 Amp switches all complete |
| 120 | Providing and fixing of heating points in 2.5 mm square Multi strand CU wire with FR insulation duely ressissed in walls, ceiling / passing through conduits all complete |
| 121 | Providing and fixing of S S combine 3 pin 6 amp |
| 122 | Providing and fixing of gency type of dome light |
| 123 | Providing and fixing of bulk heads (Exterior side) |
| 124 | Providing and fixing of 7/16 PVC insulated wire. |
| 125 | Providing and fixing of MCB SP.6 to 16 Amp |
| 126 | 32 Amp |
| 127 | Providing and fixing of 6 way MCB box and angle iron 4 legged switch board with asbstos sheet |
| 128 | Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. and obtaining the permission from the concerned department all complete25 to 40 mm nominal bore |
| 129 | Disposal of excavated earth beyond municipal limits leads upto 10 Km |
| 130 | Providing and fixing of man hole cover made up of 5 mm thick M.S sheet with 40x40x5 mm angle frame including hinges and handle. Size 450x450mmseptic tank |
| 131 | Soakage pit |
| 132 | Dry Random Rubble masonry with hard stone from quarry in foundation and plinth using quarry stone with bond stones. |
| 133 | Carriage of different material from nearest source to site of work.Stone agg 40 mm and 20mm avg lead of 15 Km |
| 134 | Sand avg lead of 18 km |
| 135 | Brick avg lead 20 KM |
| 136 | Electric PartPart-A(Internal Electrification) |
| 137 | Wiring for Light point/Exhaust/Fan point with (P+N+E) 3x1.5 sq.mm FRLS-H/HFFR PVC insulated Multi strand Copper conductor single core cable (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) surface/recessed Conduits (including Cost of Conduit) laid in slabs with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 138 | Supplying and Fixing of Indicator as required, ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/Equivalent Make & shall be approved before execution of work. |
| 139 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required,ISO/IEC Certified of Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make. |
| 140 | Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Anchor/Salzer/Havells/Paraflex Make) |
| 141 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 142 | Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H/HFFR PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Polycab/Finolex/Salzer/Paraflex Make) |
| 143 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells(Crab-Tree)/Legrand(Myris)/Anchor Rooma Plus/Schneider(Zencelo)/ABB Anti bacterial Make & shall be approved before execution of work. |
| 144 | Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS-H/HFFR PVC insulated copper conductor, single core Cable in surface/Recessed medium class PVC conduit (Polycab/Anchor/Finolex/Salzer /Havells/Paraflex Make) & shall be approved before execution of work2x10 sq.mm+ 1x6 sq.mm (P+N+E) for Power point Sub main in One run from Main Panel to Distribution Boards. |
| 145 | 2x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting/Inverter/Heating Point Sub main in One run from Main Panel to Distribution Boards.(02 Circuit) |
| 146 | 2x2.5 sq.mm+ 1x2.5 sq.mm (P+N+E) for Lighting/Inverter Circuit in One run from switch boards to Distribution Boards. |
| 147 | Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp Rating SP,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB . DB Complete with connections.(L&T/Siemens/Legrand/ABB /Schneider/BCH Make) |
| 148 | Supply/Fixing/Testing and Commissioning of Supplying and fixing following rating, double pole,(single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (L&T/Siemens /Legrand/ABB/Schneider/BCH Make)25-32Amp. |
| 149 | 40Amp. |
| 150 | 60Amp. |
| 151 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (L&T/Siemens/Legrand/ ABB /Schneider/BCH Make)12 way , Double door |
| 152 | Supply/Installation/Testing and Commissioning of upto 400mm Shutter Typed,320 Cu.m/Hr.AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37dB o including connection etc USHA/Anchor/Polycab/Orient/Halonix/Equivalent Make. |
| 153 | Supplying, installation, Testing & Commissioning of 50 Watt (System lumen efficacy ≥120 lm/Watt) Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMIEMC as per CISPR -15 , lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Wattoutput . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make:Bajaj/Halonix/Surya/Equivalent make. |
| 154 | Supply/Installation/Testing and Commissioning of BLDC 1200 mm sweep, ceiling fan with 03 No. blades, 30 cm long down rod, 02 No. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Halonix/Polycab/Orient Make.(5-Star) |
| 155 | Supply and fixing of 12 Watt LED Powder coated Pressure die cast/Extruded aluminum Body including trim with Aluminum Reflector(System lumen efficacy ≥ 105 < 120 lm/Watt ) Recess/surface mounted (Commercial type) downlighter having following specficafications .The luminaire should have a colour temperature of 6500°K, CRI≥80 and SDCM≤5. Luminaire shall be designed to emit initial system lumen output of greater than 2520 lumens with minimum system efficacy of 140 lumen/watt .The downlighter shall be back-lit & not side-lit. The driver shall have THD≤10% (@full Load) and PF ≥ 0.95 (@full load). The luminaire housing /body should made of pressure die-cast aluminum. The fixture should comply with the parameters as per IS10322. The luminaire shall have impact resistance of IK02 & ingress protection of IP20. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, \\"FAT\\" before dispatch as per IS 10322 & IK Test. The luminary shall have average life of 50000 hrs operating temperature -10 C to + 45 C The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab & BIS certificate for LED Luminaire & Driver. The Agency / firm must submit the Technical data sheet (TDS) on OEM letter head along with requisite certificates for approval by an officer from the department not below the rank of SDO ,prior to the supply of materials. The Job includes 2-years replacement warrenty from OEM for the entire lighting fixtures from the the date of sucessful handing over of site to intending department , covering any damage /mulfunctioning /burnt out what so ever reason.Approved Make:Bajaj/Halonix/Surya/Equivalent make. |
| 156 | Supply/installation/testing and commissioning of CPRI-approved panel Wall/floor-mounted compartmentalized, 230 volts DP MCCB Main Distribution panels, fabricated out of sheet steel of 16 gauge dust-protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel.The Panel is to be provided and fitted with the following adjustable-type controlling/protection switchgear devices:1. Normal Incoming:125 Amp DP MCCB with suitable breaking capacity with extended thimbles of Legrand/Siemens/ABB//LK make = 1 No.,100 Amp Bus bar Al Strips(P+N) = 1 Set,Digital Voltmeter =1 No., Digital Ammeter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicator =1 No.2. Generator/Inverter Incomer:63 Amp Single Phase Automatic Change over Switch of Legrand/Siemens/ABB/Havells/LK make = 1 No.3. AVR Bypass Switch: 100Amp 4-Pole Bypass SwitchOutgoing:(1) 63 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 03 No for normal heating sub main(2) 40 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 03 No for Sub main lighting(3) 32 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 03 No for Sub main invertorThe Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to be approved by Engineer Incharge before manufacturing. |
| 157 | Supply/Laying/Testing and Commissioning of 2 Core 70 mm sq. Al armored XLPE Insulated,PVC cable Havells/RR-Kabel/KEI/Paramount/Equivalent Make. Including Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (01.5 Feet below ground level) of standard make as approved including excavation and refilling the trench were required.The cable shall include end termination lugs with its crimping /taping. |
| 158 | ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value.Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.(For AVR/MainPanel) |
| 159 | Providing of Earthing Complete by GI Pipe 40mm 3 mtr long through GI Strip 25x3mm for Panel. |
| 160 | Supply/Installation/Testing/Commissioning of 2-3KVA/24 V Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified (with 2-Year Warranty), 02 No. of 200Ah,12V Tubular battery (with 36 Months Warranty) & Suitable Trolley Support for Inverter resting & resting of Tubular Battery etc Luminious/EXIDE/AMRON Make. |
| 161 | Supply/Installation/Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified. |
| 162 | Supply/Installation/Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G,acetylene and electrical fires. |
| 163 | Supply and Fixing of single pole blanking plates on existing MCB boxes, excluding cost of Boxes. |
| 164 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.Havells/ Legrand/Panasonic/Anchor/Schneider Make |
| 165 | Providing and Laying of shock proof rubber mats of 2mx1mx12mm thick in size of Standard Make. |
| 166 | Supply, Installation, Testing and Commissioning of 9 Mtr Hot Dipped Octagonal Pole (Type KP0975) of dimensions: Bottom Dia-155mm, Top Dia-70mm, Thickness-3mm, Base Plate-275*275*16mm, Foundation Bolt-04 No. of Dia 20*700mm and including the Supply/Fixing of The Suitable G.I Ring/Square Bracket is selected having space for holding 06 No. of Flood lights for each pole as per site requirement on approval of site Incharge. Also include Supply/Fixing of 8 SWG G.I wire run over the cable length properly earthed with main earthing pit/grid including thumbing on of terminals - gland fixation. Bajaj/Utkarsh/BPP/Surya Make (Complete in all respects) |
| 167 | Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 2ʹ x 2ʹ x 5ʹ)having 4ʹ U/G & 1ʹ A/G including cost ofform work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job). |
| 168 | Providing & Fixing of IK08 IP-66 protected high power 150-180 Watt LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted of Surya/Crompton/Halonix/ Bajaj/Jaquar Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. |
| 169 | Supply/Laying/Excavation/Testing and Commissioning of 2 Core 10 mm sq. Al armored PVC cable Havells/Polycab/LS Make. Including supply/laying of HDPE Pipe of 01 inches dia. The job includes excavation of soil, back filling, ramming and spreading of warning tape at 300mm depth and disposal of excess soil/debris at convenient location. |
| 170 | Supply, Laying, Testing and Commissioning of 2.5x3 core cable and conduting arrangement including Excavation work of Havells/Polycab/Paraflex/Equivalent Make |
| 171 | Supply/installation/testing and commissioning of CPRI-approved panel outdoor panel, 230 volts DP MCB Main Distribution panels, fabricated out of sheet steel of 16 gauge dust-protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel.The Panel is to be provided and fitted with the following adjustable-type controlling/protection switchgear devices:1. Normal Incoming:63 Amp DP MCB with suitable breaking capacity with extended thimbles of Legrand/Siemens/ABB//LK make = 1 No.,63 Amp Bus bar Al Strips(P+N) = 1 Set,Digital Voltmeter =1 No., Digital Ammeter = 1 No., CT coils for Ammeter 300 / 5A = 1 set, phase indicator =1 No.Outgoing:(1) 6-10 Amp SP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 04 No.(2) 40 Amp DP MCB (10 KA) of Legrand/Siemens/ ABB/Schinder /L&T make = 02 No.(3) GIC Digital Timer for Auto On OFF Lights= 01 No.The Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to be approved by Engineer Incharge before manufacturing. |
| 172 | Supply/Installation/Testing and Commissioning of Asfour Almaaza Chandeiler(Umbra) of bearing model No. Gold:DMO-GLD-AS9111/Equivalent with following dimensions of Jaquar/USHA Tisva/Equivalent Make and shall be approved by not less than SDO(As Choice Choosed by Head Committee of Khankah Naqsband Sahib R.A :Color: GoldMaterial: BrassNo. of heads: 1Cap type: E14Wattage: 1 x 4.5 W LED(Warm)Dimension (mm): Ø 250 x H 260Weight (Kg): 1.5No. of boxes for one product: 1 |
| 173 | Supply/Installation/Testing and Commissioning of Ornamental , wall-mounted type, crafted from cast aluminum with a total height ranging from 440 mm to 550 mm. It shall include a suitable adaptor for secure wall installation, as illustrated in the enclosed drawing or image.The fixture shall feature a combination of cast and spun aluminum components, seamlessly welded and adorned with decorative cast aluminum elements to enhance its aesthetic appeal. It shall be specifically designed to provide adequate illumination for indoor spaces.The luminaire shall be equipped with an extra-clear, transparent, and unbreakable polycarbonate diffuser. It shall conform to relevant IS standards and be fitted with a lamp holder—either screw type or B22—suitable for accommodating an LED bulb rated between 15W and 25W. The fixture shall be finished in antique brown or any other color & Shall be approved not less than SDO. |
| 174 | Supply/Installation/Testing & Commissioning of 1-phase 15 KVA,50 Hz Oil cooled unbalanced type Voltage Stabilizer SERVO control of Approved brand COPPER wound of AE/Chinar/Cosco Make ISI/1SO/IEC certified for smooth functioning/constant voltage supply having Technical Specifications :Input voltage(Ph-N) ranging from 90 Volts to 240 Volts and a balanced output Voltage of 230 Volt, ±2% Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL, High cut/Low Cut /Time delay/Over Cut through Micro Controller and Spike Protection.(For Lighting & Machine Points Only) |
| 175 | Supply/Installation/Testing and Commissioning of IP-65/68 Homogenous LED Strip (Warm Type) Warm light with following Specifications: Input Wattage: 08-10W / Mtr,Input Voltage: 220 - 240VAC,Input Frequency: 50 Hz, Input Current (Max): 50mA, Power Factor:. > 0.95,Surge Protection:2.5KV, High Voltage Protection:300V,HI-POT:1.5KV,IP Rating:IP 65/68,Working Temperature:-10°C to 50°C, LED:Bridgelux,Lumen Maintenance:70% After 50000 BH,Rated CCT: 3000K, 4000K, 6500K,Rated CRI:> 80,System Efficacy:100lm/W,Housing:Silicon Pipe covers the LED Strip Light of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 176 | Supply/Fixing/Testing and Commissioning of of Adoptor (CV DRIVER LED STRINGS 12 V 2 A IP44-66) of Philips/Wioro/Jaguar/Surya/Equivalent Make & Shall be approved not less than by SDO. |
| 177 | Supply, Installation, Testing and Commissioning of RGB LED Display:Mother board advanced model of programmable screenSoftware version: English.Scan: 1/4,1/8,1/16,commumcation:Network Interface or USB, No request the default Network.Connecting plate: Hub-08 or Hub-121Product Description: X-4. The high cost performance asynchronous controller.Product advantages: High cost performance, support large screen, Can choose on-board USB Interface or 100M Ethernet interface, MAC bindings Mechanism, Ethernet auto connection, support PC direct connection/cross-Ethernet Connection/cross-internet connection, support firmware update online.Software function: Screens cluster management/multi-program/ multi-areas display/multi lingual.Pixel Module: 12\\" x 6\\" having 512 pixels with matrix 16 x 32 Communication: Direct computer link, internet by IP, GPRS and Pen Drive.Power: voltage @ 190v to 240v @ 40 watt consumption of each two modules.Program type: Normal/global/shared/self-adapted program.Area Type: monochrome Picture and text/single line text/animation/lunar calendar/digital clock/timer/temperature/temperature & humidity/noise.Time Mode: Lunar calendar/analogue clock/digital clock/timing and counting-down port multi-groups) Brightness-Contrast regulation: 16 grades, manual and auto-timing adjustment. Power on/off mode: Manual and auto-timing powered on/offSMPS: Switched mode supply converts the AC 220V to DC 5v for the processor and for the modules. The SMPS has been made temperature sensitive and voltage sensitive as well the SMPS will work from -15 degree Celsius to + 55 degree Celsius below and upper values of the temperature. The SMPS will stop working similarly for the AC Input. The range of operating voltage starts from AC 90V to AC 240V. Including suitable cable wire & earthing as per site requirement.Data BUS: Data bus connectors are used to send the data from CPU to main series of modules and then the respective modules send the data to the desired modules for whole screen respectively.Software: Software is compatible to various processors m terms of communication like networking ,serial communication ,pen drive communication, Ethernet communication-software has got lot of applications for the messages like message timer, days message timer, message effects, message speed control , message brightness control son off timer of screen, different message fonts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender