Tender For Upgradation / Face Lifting Of Assistant Director Office Building With Allied Works At Zaldagar Srinagar (G+1).
Tender Value
2.25 Crore
Estimated cost
Bid Submission
24 Aug 2026
1 days left
EMD
4.50 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation / Face Lifting Of Assistant Director Office Building With Allied Works At Zaldagar Srinagar (G+1).
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Aug-2026 | Correction | Other | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of dismantelled material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material lead as per direction of Engineer-in-charge |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 4 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 5 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of :G.S. Sheet |
| 6 | \\"Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees, and saplings of girth up to 30 cm including removal of rubbish and disposal of the same outside the periphery of the area cleared By labours as directed by the Engineer-in-Charge. |
| 7 | Earth work in excavation in trenches for foundation with required depth including removal of excavated soil/slush etc. ,dressing of bed and sides ,dewatering (if any) of trenches till construction upto ground level is achieved and disposal of excavated soil as directed by the Engineer incharge including all leads ,lifts and Carriage by mechanical means as required complete. (For All kinds of soils) |
| 8 | Providing and laying stone soling tightly hand packed under foundations, footings ,floors etc. including carriages of materials from source to site of work complete in all respects. |
| 9 | Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works upto plinth level. (a)1:4:8( 1 cement: 4 coarse sand: 8 graded stone agg/ 40mm nominal size) crushed aggregate) including all sorts of carriage of materials |
| 10 | (b)1:3: 6( 1 cement: 3 coarse sand: 6 graded stone agg/ 20mm nominal size) crushed aggregate) for mass concrete works. including all sorts of carriage of materials |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases, Columns etc. upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with ( 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all sorts of carriage of materials including all carriage |
| 12 | Reinforcement for R. C. C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars .( All work at all levels complete.) |
| 13 | Structural steel work in welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying of priming coat of approved steel primer complete in all respects..(All work at all levels complete.) |
| 14 | Providing and fixing M.S Round holding down bolts for trusses, 300 mm to 450 mm in length and 16 mm dia including nuts, washers , Plates and threading etc. complete.( All work at all levels complete.) |
| 15 | Providing and laying damp proof bituminous membrane applied with torch over pre coated bituminous surface, 200mm wide, 4mm thick non woven type weighing not less than 3kg per Sqm. |
| 16 | Providing form work including Centering ,shuttering , strutting, propping etc. using ply wood sheeting with water proofing ply board (12 mm min .thickness) and removal of the same for( All work at all levels complete.).- a) foundation, footings basis of columns etc |
| 17 | b) Columns ,etc |
| 18 | c) Floor Beams:-G.F/F.F |
| 19 | d) Suspended floors, roofs, landings, balconies and access platform with waterproofing ply 12 mm thick |
| 20 | e) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc linner walls |
| 21 | f) Edges of slabs and breaks in floors and walls (Under 20 cm wide) |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. |
| 23 | Supplying, filling with river sand mixed with boulders in 20 Cm layers including watering, compacting & dressing under flooring in ground floor complete in all respects. |
| 24 | Brick masonry with FPS bricks of class designation 75 in super structure up to floor V level in cement mortar 1:6 (1cement: 6 cement coarse sand). complete in all respects including all carriages |
| 25 | Providing wood work in frames for doors, windows, clerestory windows and other frames Wrought framed and fixed in positions (First class deodar wood ). |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.( Ist class Kail wood) 35mm thick |
| 27 | Providing and fixing 35 mm thick paneled door shutters (Ist class Kail Wood). With 25-30 mm thick Ornamentals Kail Wood panels including necessary stainless Steel Butt hinges /screws etc. Design of shutter and panels as per the instructions of Engineer incharge complete in all respects. |
| 28 | Providing and fixing paneling or paneling/ glazing in paneled or paneled & glazed shutters for windows and clerestory windows (Area of opening for panel inserts excluding portion in side grooves or rebates to be measured). Paneling for paneled or paneled glazed shutters 4mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete.(Fixed Glasses 4 mm thick in Glazed Portions) |
| 29 | Providing and fixing 40x5mm flat iron hold fasts 40cms long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement conc. blocks 30x10x15 cms 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal size). |
| 30 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (35mm thick shutters of Ist.Class kail wood.) |
| 31 | Providing and fixing of 20 mm thick T&G planks made of First Class Budloo wood for roof soffits & Ceiling on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mmx 65 mm in sections or as required at site). including cost of necessary adhesive & cost of nails etc. Complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). (Ornamental Soffits) |
| 32 | Providing and fixing planed eves boarding of (300x40 mm nominal size) of Ist Class kail wood with necessary grooves and chamfer as per detailed drawing / as per the directions of Engineer Incharge – |
| 33 | Providing and fixing Track deck crill make or equivalent H.I. rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 255 mm T.C.T(total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 no stiffing ribs, effective water shedding and special male/female ends with full return legs on side Lapps for purlins support and anti-capillary flute inside Lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms /sm) zinc/aluminum coating mass total on both sides AZ-150 as IS -1397 ,550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M.P over 5 micron polyester back coat over 5 micron primer coats on both surfaces including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end Lapps etc (.measured for unit of laid area) (0. 50 mm thickness ) |
| 34 | As per item ( above ) for plain 0. 50 mm total thickness S.M.P. coated Galvalume steel of similar material for ridge, capping pieces at apex of sky lights/hips, valleys etc. including notching, turning down of edges of capping between ribs etc .complete(500 mm to 1000 mm) |
| 35 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 graded stone agg.) finished with a floating coat of neat cement including cement slurry but excl. the cost of nosing of steps etc. complete. (50mm thick with 20mm nominal size crushed stone aggregate) including all carriages |
| 36 | Cement plaster skirting (up to 30cms height) with cement mortar 1:3 (1cement:3 coarse sand mortar) finished with a floating coat of neat cement. (18mm thick). including all carriages |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.(600 x 600 mmm) |
| 38 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels .(Granite of any colour or shade (Area of slab upto 0.5 sqm) 18 mm thick |
| 39 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 40 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 41 | Providing and fixing of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mmx 65 mm in sections or as required at site). including cost of necessary adhesive & cost of nails etc. Complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 42 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge. |
| 43 | Extra for Providing & fixing of stainless steel navel post (Ornamental) including top ball of 304 grade of required height duly anchored to floor with dash fasteners Complete as per the directions of Engineer incharge. |
| 44 | 15 mm thick cement plaster on rough side of single or half brick wall in (1 cement: 6 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 45 | 10 mm thick cement plaster on ceilings, soffits etc. in (1 cement : 4 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 46 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all respects upto floor five level (2 mm thick) |
| 47 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work and wooden based surfaces complete.(including cost of all material, leads, lifts and carriages etc. upto site of work complete). |
| 48 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (Two or more coats on new work |
| 49 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 50 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work |
| 51 | Pointing brick masonary walls with lime Surkhi to make grooves limely red including grinding and polishing /finishing etc the brick Surface (to give a heritage look) , making the surfaces even and smooth by way of removing all foreign mateials/drpos of mortar etc including all scaffolding /necessary form works etc. upto desired height .including cost of material and labour all complete as per the directions of site Engineer |
| 52 | Supplying and fixing rolling shutters of approved make made of M.S Laths interlocked together through their entire length and jointed together at the end by end locks mounted on speicially designed pipe shaft with brackets ,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cms long wire springs grade No.2 and M.S Top cover of required thickness for rolling shutters complete as per specifications 80x 1.20 mm M.S laths with 1.20 mm thick top cover Complete in all respects. including two coats of steel primer/ synethetic enamel paint complete in all respects |
| 53 | Providing and fixing of Ball bearings for rolling shutters. Complete in all respects. |
| 54 | Providing and Fixing of following Hardware fittings of standard (ISI Mark) Aluminium fittings of superior quality (as approved by the Enginner at site) including cost of screws etc a) Tower bolt 4” |
| 55 | b) Tower bolt 6” |
| 56 | c) Handle 6” |
| 57 | d) I-Hooks |
| 58 | e) Door Handle 8” |
| 59 | f) Door Closer (Hydraulic) |
| 60 | g) Door Locks (Godreg) |
| 61 | h) L-Drop 12” |
| 62 | Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) |
| 63 | Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit/channel including providing and fixing of 6 Amp single pole switch of approved quality in modular grid plate |
| 64 | Wiring for 240 volts single phase and neutral 32 amps switched socket outlet with 2x4+1x2.5 sqmm PVC insulated copper wire in concealed or surfaced mounted PVC conduit including providing and fixing of 32amp 3 pin switched socket of approved make with modular grid plate and (complete ckt from DB to Socket. A.C point) |
| 65 | Wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 2x2.5+1x1.5sqmm PVC insulated copper wire in concealed or surfaced mounted PVC conduit including providing and fixing of 16amp 3 pin switched socket of approved make with modular grid plate and |
| 66 | Wiring for ceiling fan /wall fan point same as above in item No1 but controlled by electronic stepped regulator. |
| 67 | Wiring for 230v ac, 5pin3 x 6 amps socket outlets for light duty power with 230v ac 5/6 amps, SP switch, on same modular grid plate mounting with 2x2.5+1x1.5 sqmm PVC insulate copper wire of approve make |
| 68 | Wiring for 230v ac, 5pin 6 amps socket outlets for light duty power with 230v ac 5/6 amps, SP switch, on same modular grid plate mounting with 2x1.5+1x1.5 sqmm PVC insulate copper wire of approve make |
| 69 | Wiring for circuits for light/fan/exhaust fans/AC,setc with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits/channel complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (without Conduits) a) 2x1.5 Sqmm |
| 70 | b) 2x2.5 Sqmm + 1x 2.5 Sqmm |
| 71 | c) 2X6 Sqmm+ 1x4 Sqmm |
| 72 | d) 2x10 Sqmm +1x6 Sqmm |
| 73 | e) 2x16 Sqmm + 1 x10 Sqmm |
| 74 | Supplying and fixing of PVC conduit/ channel including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting ,chases and making good or surface mounted including all fixing hardware as required a) 25mm dia |
| 75 | b) 32 mm dia |
| 76 | Supplying installation testing and commissioning of pre wired ceiling fan complete with connection as required |
| 77 | Supplying installation testing and commissioning of 12 watt led light complete with connection as required |
| 78 | Supplying installation testing and commissioning of exhaust fan complete with connection as required. |
| 79 | Supplying and fixing of following size mcb’s complete with connection as required make Schneider a) 6-32 amp SP |
| 80 | b) 32-63 amp DP |
| 81 | Supplying installation testing and commissioning of 30 watt led flood light complete with connection as required |
| 82 | Supplying installation testing and commissioning of led mirror light complete with connection as required |
| 83 | Supplying installation of 8way TPN distribution box complete job as required |
| 84 | Supplying installation of 4way TPN distribution box complete job as required |
| 85 | Supplying installation testing and commissioning of 1.5 tr hot and cold Air Conditioner complete with copper pipe, drain pipe, copper cable up to 10 mtr including auto servo voltage stabilizer complete job as required |
| 86 | Supplying installation testing and commissioning of LT three phase electrical penal canopy type stand mounted as per site requirement complete as required |
| 87 | Supply, Installation, Testing and Commissioning and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size complete as required.a) 70 sqmm 3.5 core |
| 88 | Supplying installation and testing of 50mm Gl. pipe filled with crystalline conductive mixture with copper strip of size 25mm x 6mm of length 2 Mtr with eco friendly backfill compound 50 kg with GI earth strip as required |
| 89 | Supply and Fixing of 6 Kgs CO2 Fire Extinguishers |
| 90 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 25mm OD(SDR-7.4) |
| 91 | PN-16 pipe, 32mm OD(SDR-7.4) |
| 92 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., 25mm dia |
| 93 | 32mm dia |
| 94 | Providing and fixing PPR Unions a) PPR Union 32mm |
| 95 | Providing , fixing & laying G.I. pipes Medium type complete with G.I. fittings and clamps, incluing trenching and refilling (external work)a) 25mm dia |
| 96 | Providing & Fixing wash basin with bracket and pedestal. |
| 97 | Providing & Fixing C.P. waste coupling. |
| 98 | Providing and fixing white vitreous china flat-back large size Lipped Front Urinal Basin of approximate size 610x390x380 mm, complete job. |
| 99 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 100 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 101 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm. |
| 102 | Providing and fixing health faucet of standard quality and make. |
| 103 | P/f of Geyser of 50 litres capacity incl. cost of Gyser bolts, cp connections of approved quality and make,all complete job with ISI mark.(venus,Racold or Ewuivalent) |
| 104 | P/f of Geyser of 25 litres capacity incl. cost of Gyser bolts, cp connections of approved quality and make,all complete job with ISI mark. .(venus,Racold or Equivalent) |
| 105 | Providing & fixing C.P. toilet paper holder, with roller complete, including cutting and making good the walls wherever required. |
| 106 | Providing & Fixing C.P. Single hole mixer for wash basin.including C.P. tubes |
| 107 | Providing & Fixing C.P. wall mixer of approved make including cutting and making good the walls wherever required. |
| 108 | Providing and fixing of C.P. soap case of standard quality and make. |
| 109 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 110 | Providing and fixing corner glass shelf. |
| 111 | Providing and fixing long nose bib cock of approved quality and make. |
| 112 | Providing and fixing C.P. angle valve of standard quality and make. |
| 113 | Providing and fixing of sink mixer of standard quality and make. |
| 114 | Providing and fixing PTMT grating of approved quality and colour. Rectangular type with open able circular lid |
| 115 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm |
| 116 | Providing and fixing P.V.C. pipe and pipe fittings of the following nominal dia to P.V.C. Soil/Waste/Ventilating pipes, excluding cost of holder-bats. a) Pipe 100mm |
| 117 | b) Floor trap 100mm |
| 118 | c) Door T 100m |
| 119 | d) Collars 100 mm |
| 120 | e) Reducer 100 x 50mm |
| 121 | f) Pipe 75mm |
| 122 | g) Floor trap 75mm |
| 123 | h) Door T 75mm |
| 124 | i) Collars 75 mm |
| 125 | j) Pipe 50mm |
| 126 | k) Cone covel 50mm |
| 127 | l) PVC waste pipe |
| 128 | Construction of Brick masonry Man hole with PVC/CI Man hole cover of size 450mmx450mm of approved quality and make complete. |
| 129 | Providing and fixing of master trap of approved quality and make. |
| 130 | Providing and fixing of 6-layer polyethylene water storage tanks ISI-12701 marked of approved quality and make. With cover and suitable looking arrangement, outlet and overflow pipes complete (At all levels) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender