Tender For Repair/Replacement Of Roof Sheeting, Trusses, False Ceiling, Steel/ Aluminium, Pvc Joinery And Certain Allied Works For Md Accn At Afs Amla
Tender Value
30 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
21 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Roof Sheeting, Trusses, False Ceiling, Steel/ Aluminium, Pvc Joinery And Certain Allied Works For Md Accn At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete all as specified and directed. |
| 2 | Fixing only 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed. |
| 3 | M&L for 6mm thick asbestos cement,corrugated or semi-corrugated sheet in roof, walls etc fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed. |
| 4 | M&L for 6mm thick asbestos cement two piece, adjustable serrated ridge for corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and as directed. |
| 5 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 6 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed. |
| 7 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | Dismantling of wall,display board/ceiling board fibre, pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets complete all as specified and directed. |
| 9 | S&F size of grid 605X605mm Anodised aluminium snap grid frame work for false ceiling all as specified and directed with hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleat of GI flat 40x3mm and 60mm long and expension holed fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 10 | M&L for 4mm thick non asbestos fibre cement building board fixed in cement ceiling flat or sloping to GI/aluiminium frame work complete all as specified and directed. |
| 11 | M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed. |
| 12 | S&F in repairs for 12mm thick fire impact and Termite-Resistant MDF (Medium density fibre board) boards with smooth surface, surable and eco friendly use for Wall Panels, Kitchen Cabinets, Wardrobes, Storage Units, Partitions and more fixed with screws to timber frame work, wall hung type complete all as specified and directed. |
| 13 | Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 14 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 15 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 16 | Taking down chowkats or frames with shutters any type not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 17 | S & F steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 18 | All as per item No 17 above but without glazing bars complete all as specified and directed. |
| 19 | Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed. |
| 20 | S & F steel ventilator with top hung shutters incl hinges with steel peg stay, complete all as specified and directed. |
| 21 | Taking down chowkats or frames with shutters any type exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 22 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and direcetd directed. |
| 23 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 24 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 25 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed |
| 26 | S&F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 27 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 28 | M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves, chowkats etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed . |
| 29 | S&F in repairs 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 30 | All as per item No. 29 above but 75mm long complete all as specified and directed. |
| 31 | S&F 150mm long SI marked aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | All as per item No. 31 above but 100mm long complete all as specified and directed. |
| 33 | S&F 150mm long ISI Marked extruded aluminium alloy handles, cast type anodised complete all as specified and directed. |
| 34 | All as per item No. 33 above but 100mm long complete all as specified and directed. |
| 35 | S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. |
| 36 | S&F 125mm size hasp and staple, safety type of aluminium anodised with mild steel hinge pin including bolt hinge plate fixed with screws complete all as specified and directed. |
| 37 | S&F in repairs for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including hacking out broken glass pane complete all as specified and directed. |
| 38 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 39 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 40 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 41 | S&F second class hard wood small fittings such as shaped door and window stops, brackets of any type, latches, hings blocks and the like, articles not exceeding 200 cum complete all as specified and directed. |
| 42 | Taking down and refixing in same opening, shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. |
| 43 | M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 44 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 46 | S&F Roof trusses (framed) trussed purlines, crane gantries, rails and fastenings and heavy brackets framing (beam, Tee, angle, channel or flat sections)of Fe-410-W(Gde-E-250) quality B including distance pieces, cleats etc complete all as specified and directed. |
| 47 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; hold fast, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 48 | M&L for preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed. |
| 49 | M&L for preparation old painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed |
| 50 | M&L for cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but n. exc one brick complete all as specified and directed. |
| 51 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. |
| 52 | M&L for brickwork with fly ash ,sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 53 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any hieght complete all as specified and directed. |
| 54 | Material and labour for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 55 | M & L for (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with or without liquid waterproofing compound @ 200ml per bag of cement finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately. |
| 56 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat alkali resistant priming paint complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 57 | M&L for two coats of oil emulsion distemper on wall newly plasterd surfaces over a coat of chalk white primer complete including prepatation of new surfaces complete all as specified and directed. |
| 58 | S&F in repairs door closer hydraulically regulated designation No.2 universal type,suitable for door shutters of 701 to 850 mm width and of wt 36 to 60 kg.Aluminium(Die cast) complete all as specified and directed |
| 59 | S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 60 | S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 61 | S&F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed |
| 62 | S&F 4.80mm thick sheet glass selected quality and glazing in squares not exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified and directed. |
| 63 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 64 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,Overall length of cover plate 150mm complete all as specified and directed. |
| 65 | S&F in repairs 4 lever aluminium mortice lock, vertical type size 100mm complete all as specified and directed. |
| 66 | S&F in repairs door trip with rubber sheet 4mm thick, 12Cm wide as in door fixed with nails complete all as specified and directed. |
| 67 | S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed. |
| 68 | S&F in repairs 30mm continuous (piano) hinges, mild steel, bright finish or elec-trogalvanised in wooden surface complete all as specified and directed. |
| 69 | M&L for welding in repair exc 2.5cm but n exc 5cm in length, thickness of metal n. exc 6 mm complete all as specified and directed |
| 70 | M&L for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in filling hollow sections of pressed steel door frames, cills, bed blocks, for embedding hold fasts etc, complete all as specified and directed. |
| 71 | S&F in repairs Powder coated Anodised aluminium grill (Dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 72 | M&L for aluminium composite panel sheet of colour/shade and pattern approved by GE of 4/5mm thickness which consis of 3/4 mm thick thermoplastic core of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surfaces finished with 30 microne PVDP and inner surface finished with a thin coat of polyster paint, fixed in pannels to aluminium frame including all necessary frame work or powder coated snap beading and rubber gasket complete all as specified and directed. |
| 73 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain shutter of 30mm size for door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, hinges etc complete all as specified and directed. |
| 74 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain shutter of 30mm size for glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws for fixing including all fittings such as handle, tower bolt hasp staple, hinges, SS wire mesh etc complete all as specified and directed. |
| 75 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender