Tender For Certain Repairs To Drainage Compound Wall, Fencing And Allied Services In Sector-28, 29, 30 & Rcma Bldg (3Brd) At Chandigarh
Tender Value
15 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Drainage Compound Wall, Fencing And Allied Services In Sector-28, 29, 30 & Rcma Bldg (3Brd) At Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing for factory made RCC heavy duty manhole cover (50 - 75 mm thickness) of clear opening 600 × 600 mm, manufactured from reinforced cement concrete including M.S. angle iron frame (50×50×6 mm) around the cover, complete with lifting hooks, embedding the frame in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of materials, labour, curing, carriage complete all as specified and directed. |
| 2 | Material and labour for PCC , 1:3:6 C-1 (20mm graded stone aggregate) as in sub base ,under floor and mass concrete complete all as specified and directed. |
| 3 | Machine pressed precast leather finish, coloured, concrete interlocking paver block in repair of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade laid over a layer of fine river sand, watering and consolidating complete all as specified and directed. (Note: Sand shall be measured and paid for separately) |
| 4 | Material and labour for sand cushioning including watering, ramming and consolidation complete all as specified and directed. |
| 5 | Material and labour for PCC colour chequered tiles with white cement and pigment 300mmX 300mmX 22-25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over 15mm thick screed bed CM (1:6) fixed in repair complete all as specified and directed. |
| 6 | Demolition of brick or stone masonry work, built in cement mortar incl all quoinns, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed. |
| 7 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortor (1:6) and including taking out roots ,of bushes/vegetation growth upto 120 cm complete all as specified and directed. |
| 8 | All as per Item No 7 above except bricks complete all as specified and directed. |
| 9 | Material and labour for PCC (1:2:4) Type B-1using (20mm graded stone aggregate) as in bed blocks, hold fasts and coppings as in brick wall duly rounded or chamfered on edges and finishing on rroof surface / chajja (thickness of concrete will be provided as per site requirement up to five storey incl necessary sccafolding and demolition of PCC and dispose of the material from MoD land complete all as specified and directed. |
| 10 | Material and labour for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundation filling and mass concrete sub base and under floors complete all as specified and directed. |
| 11 | Taking down existing plaster of any description on brick wall/ concrete surface in facia,chhajjas,balconies,roof/ceiling at any floor (upto G+3) including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 12 | Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick/concrete surfaces of walls matching with existingh pattern i.e. grooving/ pointing including two coats of exterior emulsion paint with necessary prepartion to newly pastering surface and finished fair and even (without using extra cement ) and including taking out roots ,of bushes/vegetation groth upto 120 cm complete all as specified and directed. |
| 13 | Dismantling of wrought iron mild steel work of any description or from any position complete all as specified and directed. |
| 14 | Supply and fixing for framed work such as grills, gratings etc wth ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors,Ms Plain sheet, XPM, ladders, framed balusters, walk way, railings, framedwork of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 15 | Taking down carefully existing grill (of any description) from walls/compound wall of any height by demolition the portion of embedded PCC or brick work and refixing the same in same/other location as ordered as per site requirement complete all as specified and directed. NOTE:- PCC for embedding in refixing shall be paid for separately under appropriate item herein. |
| 16 | Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 17 | Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over one coat of Zinc Chrome primer complete all as specified and directed. |
| 18 | Material and labour for pre polished machine cut kota stone slab flooring, 15-18mm thick in (single piece), in riser and treads and landings of stairs and step, skirting & dado in repair over and including 15 mm thick cement screed in Cement Mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and moulding edges and corners allaround and polishing to match with existing in Blgs up to G+3 complete all as specified and directed. |
| 19 | Material and labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete including Dismantling floor, stone, hearth or wall tiling/terrazo/sotne slab including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed. |
| 20 | All as per serial item No 19 but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed . |
| 21 | Material and labour for glazed ceramic colour tiles 300X 450 X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. in Bath, WC , Kitchen and cupboards set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-in-Charge complete all as specified and directed including Dismantling floor, stone, hearth or wall tiling/terrazo/sotne slab including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed. |
| 22 | Material and labour for non skid coloured joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed including Dismantling floor, stone, hearth or wall tiling/terrazo/sotne slab including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed. |
| 23 | Material and labour for 15 mm thick redering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ 200ml per 50 Kg of cement and incl demo of old plaster on concrete surface over roof surface up to five storey and dispose off the waste material from MoD land complete all as specified and directed. (NOTE:- WPC shall be measured and paid for separatly) |
| 24 | Material and labour for liquid water proofing tratement on roof/terrace/chajja surface and applying three coats of fiber reinforced elastomeric liquid water proofing treatment incluing crack seal treatment as per site requirement, formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fiber, upon curing, forms a thick seamless, durable treatment. Apply self priming coat with 33% of water dilution in a verticle or horizontal surface. Treatment should be viscous liquid apprearence, colour white and applied :- (a) Apply first coat of the material shoulde be apply in both direction of surface without dilution to achieve a forced system coverage of 0.93 sq metre per liter. Allow it to dry for 4-6 hours between coats. (b) Apply second coats without dilution to achieve the forced system coverage of 1.20 sqm per liter on perviously painting surface with high quality. Allow it to dry for 4-6 hours between second and third coats. (c) Apply Third coats without dilution to achieve the forced system coverage of 2.32 sqm per liter on perviously painting surface with high quality. Note :- Executive as per manufacture instruction including scaffolding, trestles, ladders cradles and necessary safety measures complete all as directed by Engineer-in-chage. Make Asian Paint (Smart care Damp proof) or equivelent of BERGER/SHALIMAR. |
| 25 | Dismantling of GI barbed wire fencings fixed in RCC/Steel fencing posts complete all as specified and directed. |
| 26 | Supply and fixing for GI 2 standed barbed wire2.24mm dia wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire. staples or steel pins etc as directed (Each line wire to be measured) complete all as specified and directed. |
| 27 | All as per above item No 26 but except barbed wire complete all as specified and directed. |
| 28 | Supply and fixing in repairs for concertina coil 2.64mm dia having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide, 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 complete all as specified and as directed. |
| 29 | Dismantiling plain or corrugated steel sheeting/ AC sheets or of any pattern, any gauge, thickness, including Nainital or similar pattern roof coverings in (G+3) Bldgs complete all as specified and directed. |
| 30 | Supply and fixing for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender