Tender For Provision Of Covered Vehicle Garage Alongwith Allied Services For Asc At Pattan Under Ge 969 Ews
Tender Value
11.81 Crore
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
9.15 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Covered Vehicle Garage Alongwith Allied Services For Asc At Pattan Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Note: (i) Please refer Schedule 'A' Notes given in tender documents.(ii) The Schedule 'A' Part-XII is not estimated by MES and the estimated rate indicated as \\"Rs. 0.00\\" under Col. 5 signifies this fact only. |
| 2 | LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS |
| 3 | Lump sum price worked out by the contractor for BUILDING WORKS carried forward from Pre-Priced Schedule 'A' Part-I. |
| 4 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS carried forward from Pre-Priced Schedule 'A' Part-II. |
| 5 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-III. |
| 6 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS carried forward from Pre-Priced Schedule 'A' Part-IV. |
| 7 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS carried forward from Pre-Priced Schedule 'A' Part-V. |
| 8 | Lump sum price worked out by the contractor for ROAD, PATH AND CULVERT WORKS carried forward from Pre-Priced Schedule 'A' Part-VI. |
| 9 | Lump sum price worked out by the contractor for PROTECTIVE WORKS carried forward from Pre-Priced Schedule 'A' Part-VII. |
| 10 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS carried forward from Pre-Priced Schedule 'A' Part-VIII. |
| 11 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS carried forward from Pre-Priced Schedule 'A' Part-IX. |
| 12 | Lump sum price worked out by the contractor for RAMP WORKS carried forward from Pre-Priced Schedule 'A' Part-X. |
| 13 | Lump sum price worked out by the contractor for SITE CLEARANCE & EARTHWORKS carried forward from Pre-Priced Schedule 'A' Part-XI. |
| 14 | MISCELLANEOUS ITEMS OF WORKS (SCHEDULE 'A' PART-XII)(A) EXTERNAL ELECTRIFICATION WORKS |
| 15 | Supply, installations, testing and commissioning factory made out door cubical type LT panel board dust and vermin proof , free standing, floor mounting type mounted on and incluidng 1:3:6 PCC foundation as requried at site and of fabricated by 3.15 mm thick SS sheet over MS 50 X 50 X 6 mm thick angle iron frame of requried type for support with double door both sides open type with necessary locking arrangement with slopped roof on top duly painted with two coats of powder coated semense gray paint complete and having separate doors inside for accomodating all incomming / out going feeders of suitable sizes all as specified and directed by Engr-in- Charge:-INCOMING(a) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA - 01 No for incoming.(b) Copper Busbar 1.5 times current (300 Amp ) rating duly sleeve insulated for set of 3 phase, 4 wire system - 01 Set.OUTGOING(c) MCCB 4 Pole,32 amps ,415 Volt of breaking capacity not less than 25 KA - 02 (d) MCB TP 20 Amp, 415 V of breaking capacity not less than 25 KA - 05 Nos (e) Multifunctional meter Digital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase(f) LED Indicating Lamps R,Y,B - 01 Set |
| 16 | Supply and fixing of loopin loopout fuse junction box of size 210 x 155 x 92 mm made out of thermo plastic Polycarbonate with IP 66/67 weather proof for outdoor installation (with knockouts of cable entry) protection with terminals and locking screw fitted with 3 phase with neutral copper Bus Bar, 415 Volts, 50Hz and 6A MCB SP, suitable for cables off sizes and fixing on steel tubular pole at a height not less than 1 m above ground level with the help of clamps two nos of F1 20 x 3 mm and suitable nuts and bolts, compelete all as specified and directed. |
| 17 | S & F of 16 Mtr high mast shaft in two sections with special latching arrangements suitable for 47 m/sec wind speed as per customer requirement, with head frame, winch mounting bracket, luminaries carriage suitable to install 08-10 nos 200W Flood light luminaries in symmetrical arrangement of Bajaj & equivalent in Wipro & Philips .The Highmast rate is inclusive of :-(a) Raising lowering system comprisin double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation)(b) Foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template.(c) Outdoor stand mounted feeder pillar.(STD-4) & shall be supplied by Highmast OEM only.(d) Low intensity single dome AOL(e) Flood Light 200 W of Bajaj & equivalent in Wipro & Philips - 08 Nos(f) RCC/PCC as per manufacturer drawing complete with all respect including excavation & refilling of Pit.(g) Erection of High mast including all T & P complete in all respect complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender